50A Plasma Cutter with LED Display, Dual Voltage 110V/220V, Clean Metal Cutting up to 1/2″ Steel, Easy Setup PT31 Torch, Lightweight for DIY & Home Workshops

Bought for a food plant, where everything we do is stainless steel. Got tired of cutting everything with an angle grinder. Stainless steel takes almost twice the heat as mild steel. For $200, this performs as well as the $2,700 my last job had. I’ve had it for a month and used 3-4 times a week, normally on 3/32 or 1/8” sheet metal. Will cut both on 110V, roughly 25 amps. Getting up closer to 35 output amps, it will trip our 15 amp breaker occasionally. But on 220v input, it cut 1/4” steel no problem. Roughly 55 psi input. The ground lead that it comes with has a thin cable and is short, but it’s a dinse-25 connector so can be replaced cheaply. Comes with a few extra cups, collets, and electrodes. The air regulator and lines and clamps work as they should. The power cord could be longer, but that’s an easy fix. The cutting torch isn’t bad, and the protector on it is nice. Over all, fantastic for the price. Hasn’t died yet. Nice and portable, worked out of the box and setup is very easy.

Used it with the 220 outlet and it worked amazingly well.

This was first time I've ever used a plasma cutter. I choose this machine because it was the most reasonably priced of all the machines I viewed. It came the day that it was projected to be delivered. The assembly was very simple if you have any mechanical skills. Although, the instructions are short on details. It would be helpful if the machine came with chart on how much air pressure and cutting amps for various metal thicknesses. I'm still not sure what one of knobs does or what to set it at. The machine worked fine and I was able to accomplish all of my projects without any problems.

This is a great, cheap plasma cutter. Adjust your air pressure right and it cuts very well. Only need enough air pressure to push molten metal out of the way. I have cut 5/8" plate steel with no problem.

Purchased this item to use in my home shop. Arrived in good order without damage. Seemed like solid construction. I got the 110/220 version and started with the 110 side of things. It blew the breaker on 110 so I had a 220 installed with correct plug socket ($80 that I won't get back with this purchase). Tried it again and it was better and worked well for 15 minutes. I must have cut about 9 inches of plate and the unit just stopped functioning. The unit turns on and the fan runs. There is a "O/C" light (Overcharge, Open Circuit, Orange County...) that came on as a result of when I try to engage the machine. I changed the tip, unplugged it, reset the breaker, redid all of the connections, and inspected the unit for damage. Nothing I could see was wrong. I checked the "owner's manual" (all seven pages of poorly worded phrases) which didn't even list the "O/C" light. The fault checklist mentions damage to a board, and as though I am to inspect it. Even though, they clearly state that I should not "dismantle" it. So the obvious con is that the unit failed after about 30 minutes of use (max). Other cons: Owner's manual is of no value. Doesn't even mention how much PSI you should have running through the machine from the air hose. The air fittings and tighteners are poor and leak. Received this email from the seller. I changed the text below only to delete my name and the link to my review. Not sure what Amazon's policy on monetizing feedback, but I would consider it unethical. It also seems to be written by the same individual who wrote the instruction manual. Letter of apology to my dear Amazon customer friend dear ***** ****** Thank you for your recent purchase Customer comments are very important to us and we value your response. Please let us know how to help you solve your problems. We apologize for the inconvenience and thank you for the opportunity to correct the problem. Can you delete bad comments? c'mon. We will give you Amazon Gift Card as compensation You can reply to your request by SMS. Customer service team thank you Product review link: ******** As an apology, we want to make up for you. If it is convenient, you can contact us at any time, and we will provide the best help. By doing so, we hope you can update your comments on us. Many thanks for your help

I have a small welding shop and have always used oxy/acetylene but have gotten tired of swapping tanks and the ever increasing price of tanks sonI figured I give it a try. When it arrived I was thinking for the price I would be shocked if it actually worked. I put it together and noticed that the bracket for the air regulator is a little tight. I plugged it in to my welding machine plug and tried it out on some 1/4 steel plate. I set the air to 30psi and to my surprise it cut very nice. I bought a $25 circle cutter and this machine cut a beautiful clean line. I didn't even need to use my grinder to clean it up. Today I tried it on 1/2" high carbon steel plate. This machine worked very nicely again. I cut clean straight lines and a nice circle again. You have to go slow and bump the air pressure up to 50psi but it did the job. As in the.photos you can see a little slap but I have a scrapper for this and the slap was very brittle and came off almost effortlessly . The edge was nice and I had hardly any clean up with the grinder. Over all I am shocked by how well this machine preforms. There are little things I don't like, for instance how the trigger is attached to the torch with cable ties, or how the regulator bracket is REALLY snug. But for the price I am extremely satisfied.

Good little plasma cutter. bought for small home projects on a car build. Cuts great for it size. Good for someone who wants a compact unit and not take up a bunch of space.

Works good! I havent used it much. I cut a 6" hole in 1/8" plate, worked fine for that. Im not sure its as powerful as a 50A thermal dynamics but it did work fine.

tutto

問題なく使えました

He recibido el aparato, cuando lo he podido conectar ni siquiera se pone en marcha la chispa para cortar. El contacto de salida estaba sin conectar. He tenido que abrirlo y conectarlo con un tornillo.

Das Gerät ist super es geht wunderbar es wäre schön wenn man bei dem Luft an Schlüssen Dichtungen oder Etwas anders mit rein legt weil so ist es nicht dicht 👍

Conditionnement parfait, produit à la hauteur de mes attentes et une expedition super rapide... Que demander de plus ?