G GJIA 60W 6600LM LED Loading Dock Lights with 40'' Swing Folding Single Arm, AC100-277V, 360° Rotatable LED Lamp Head, ETL Listed, IP65 Waterproof for Trailers, Docks, Warehouses, Container.

Installed 10 of these in a clients loading docks, they liked them so much they want to replace 14 more. Unfortunately you guys don't have enough in stock. I'm not seeing a place to contact the seller?

Loading dock

Great lamp, bright and sturdy. See the brackets mounting holes - those are not 2x4 stud friendly. If you attach this to a wall on 2x4 studs, the holes are too wide apart for all to hit the stud. Either drill holes in the middle of bracket or use a bracketing piece between the wall and this unit. I did the latter.

I mounted the arm to my teardrop pallet rack upright using (2) National catalog model No. 2192BC square U bolts. That is 3/8 x 3" x 7" and fit perfectly around the upright and into the holes on the mounting plates. A few minor issues: The button on the light is a metal push button located on the back heatsink of the light. You have to hold the hot light to turn on and off. I do not like that you have to hold what is basically the heatsink of the light to be able to press the button. In addition, the light is mounted high so a remote inline switch would be preferred and I plan to implement that. The second issue is the gimble that holds the light is held on with a knob that allows you to swivel the gimble. There is one nylon washer included for this joint and no matter where you put it, rotating the lamp will untighten the knob holding it all together. I'm going to try adding a few additional washers, silicone lube and if that does not work I may end up locktighting the knobs. The whole arm is pretty stiff as it comes preassembled. I prefer it that way so it stays put but it does take some force to move it. You could put a drop of silicone on the washers or loosen the bolts a little. The good stuff: It is very stable and very bright. There are many ways that you can bolt it together if you want the joints to be able to flex perpendicular to the way the factory put it together. You could easily mount a second light on the mast.

I have a sort of temporary garage shed I work out from time to time and I needed a stronger, directable light. This did the trick and feels well made to boot. I love how sturdy and stable it feels attached to the wall even after loads of adjustments and moving around. Another nice feature is how flexible it is and easy to adjust. You have tons of angles and movement that are simple to unwind and lock in place. The best part of this is that is crazy bright! I hope to eventually setup my permanent garage but until then it is nice and bright in mine because of this arm. 8/10 I would recommend it. I hope this review is helpful

This G GJIA loading dock light is made of heavy gauge cast aluminum and has two articulating arms with smooth action. The lens cover is a bit frosted so the light does not blind a person while in use. I am very impressed with the professional paint on this light (looks powder-coated but I don't know if it is). This light has a cord and plug for 120 Volt. To mount the light to the arm in different positions there is one threaded pin with twist-knobs on both ends (easy). The light can be mounted above, below or on either side of the articulating arm. This light fixture illuminates a large area and can be used in many different areas: boat docks, truck ramps, large shops and many other. For a light of this quality the price is on point. Highly Recommended! 10 Stars!!

This dock light is two things: bright and heavy duty. Once mounted, the arm is able to move pretty freely, but not loosely. Once in position, it tends to stay there. The light itself is very bright and has decent heat dissipation as well. The arm is quite heavy, so the mount pint will have to be something that cannot be easily toppled or preferable is permanently fixed to the ground. The power button is on the light itself, so you will want to keep that in mind when mounting it. Also, while the light does have incredible range of motion on a horizontal axis, it does not move vertically so that may need to be considered when selecting a mount point. The can be pointed up and down/left and right, but there isn't a way to change the angle of approach. Overall this is an amazing light.

I've been using this loading dock light for about a month now, and I'm really happy with it. It's bright and it's easy to install. I also like that it's weatherproof, so I don't have to worry about it getting damaged in the rain or snow.