

❄️ Stay cool, game hard, and never throttle again!
The PTM7950 is a premium 40x80x0.2mm phase change thermal pad with 8.5 W/mK conductivity, designed for high-performance cooling in gaming consoles and laptops. Featuring advanced polymer PCM technology, it activates at 45°C to minimize thermal resistance and withstands rigorous thermal cycling and high-temperature baking for long-lasting reliability. The package includes all necessary tools for easy installation, making it the ultimate upgrade for professionals and gamers seeking superior heat management.











| Brand | JOYJOM |
| Package Dimensions | 15.29 x 10.21 x 2.69 cm; 59 g |
| Item model number | 01 |
| Manufacturer | JOYJOM |
| Are Batteries Included | No |
| Item Weight | 59 g |
A**S
Habe mir dieses Thermopad gekauft da meine Red Devil RX 6800 XT immer eine 25-30° höhere Hotspot temperatur hatte als die normale Temperatur. Man muss sagen dass das Auftragen für jemanden der das zum ersten mal macht etwas fummelig ist - ich habe mir extra dafür eine kleine Pinzette zuvor gekauft und für mich war es das auf jeden Fall wert. Nun gut was sagen die Temperaturen nach den Wechsel auf die PTM7950? Cyberpunk 2077 1440P alles auf Max, kein Raytracing - GPU ist Übertakted und zieht ca. 330W. Voher: GPU Temp: 75° Hotspot: 97-105° Nacher:GPU Temp: 70° Hotspot: 85-89 Ich bin wirklich überrascht wie gut Thermopads geworden sind, damals hieß es ja quasi immer nur das Thermopads soviel schlechter seien als Paste, aber diesen Unterschied hätte ich wirklich nicht erwartet. Achtung: Das Thermopad brauch einige Zeit(Bei mir waren es 2-3 Tage) mit Last bis man die wirklich richtigen Temperaturen sehen kann, es muss sich quasi etwas verflüssigen und sich besser auf den Chip verteilen was evtl. etwas dauern kann - allerdings hat man hier den Vorteil das sich die Temperatur nicht mehr verschlechtern wie bei Wärmeleitpaste nach einigen Monaten, für die Langlebigkeit auf jeden Fall top!
T**D
Great value thermal pad/paste. PTM is a phase change material that allows it to be applied as a thermal pad and with heat it will change into a paste. I have bought a few sets of these, and applied to 3 gpus, 2 laptops, a handheld, and my main computers CPU (did not delid, just used it in place of regular paste). I will mention, there is some talk on reddit about the JOYJOM PTM7950 not actually being true PTM7950. I am not that experienced that I would be able to tell the difference, but overall sentiment was that it still performs similarly enough that you will see good results. Adding that with the value of this brand being much cheaper than trying to go through other channels to get the guaranteed stuff, this is a no brainer for most. I noticed huge temperature drops in my Asrock RX 6900 XT and EVGA RTX 3080. I didn't use my i7 13700k without the JOYJOM PTM paste so I can't compare there, but I have not experienced any throttling and the temps are better than I expected with all the issues on the chip. My MSI GE66 Raider 11UE, my partners old Razer Blade 16, and my GPD Win 4 all also saw major temperature drops using these pads on their CPU and GPU's. This resulted in less noise as the fans didn't have to ramp up as high, and better performance. The kit these come with is also handy. I don't really use the finger gloves, but I could see them being nice if you have nice nails and don't want to get paste on them. The cleaning wipes and little brush are a nice touch as there is a good chance you will be cleaning off old paste with the install and these will help you clean up easily. I can safely recommend this to anyone looking to re-paste their computer/parts. I plan to continue buying this as needed myself as its performed well in my tests.
T**M
Took a risk buying this, there were 3 issues: - Product listing has "Brand: JOYJOM" but the paste should have been made by Honeywell. - Cost (I paid £25.46) is far higher than any thermal paste I know of. - Posted from China or USA (I can't tell), not sure how I'd get a refund if it's not right. I used it to re-paste my laptop Legion 5 Pro 2021 16ACH6H because the processor reached 104°C using Arctic MX4. It worked as you can see in my screenshot attachments (they were running Cinebench r23) and reducing the temps in some of my games by up to 20°C. They provided provided tools but I think they were inappropriate, why do I need a screwdriver and a brush? They should have provided a tweezer instead to remove the plastic covering the pad.
N**N
事前情報通り、やはり貼り付けについては苦心しました。 CPUに直で貼るよりも、クーラー側に貼る方が作業しやすいのでは ないかと思われます。冷蔵庫で冷やすと剥がしやすく、スマートに 作業できます。 冷却性能については全く不満ありません。 CPU温度をそれとなく終日監視してみましたが、高性能グリスと 比較しても突発的な急上昇を抑える印象で、今のところは個人的に 理想的です。 これは体感の話となりますが、本格運用前にCPUベンチで70~80℃ 位まで上げて10分間保つなどの馴染ませをすると、より性能が安定 した? 気がします。(相変化素材の特性を鑑みて……) CPU:14600K クーラー:be quiet! DARK ROCK ELITE
V**T
It's unbelievable how much the temps went down. Of course, my laptop was very overdue for a cleaning, however the thermal replacement did wonder for my laptop (LOQ 15IRX9D2 for reference). Around 65-75 degrees C for AAA game that came out in 2019. Great product.
Trustpilot
1 week ago
3 weeks ago