Solsop Pass Through RJ45 Crimp Tool Kit All-in-One Ethernet Crimper Cat7 Cat6 Cat5 Crimping Tool with Network Cable Tester, 50-Pack Cat6 RJ45 Pass Through Connector, 50-Pack Connector Boots

There are several items as part of this package. I will review them one at a time. 1. Crimpers pros are the multifunction all in one tool. first there are wire cutters and are very sharp and precisely cut the CAT5/5e. The cutters are not meant to cut heavy gauge wire. Next there are two wire strippers, one for round cable and one for flat cable. I can't speak to the flat wire stripper because I don't use flat cables but the round CAT5/5e stripper worked perfectly without knicking any of the inside wires. Although I would warn that the round cables can become more oval when handling but just a quick squeeze to reshape the cable before using the strippers works perfectly. Finally you have the actually crimping function. I only used the RJ45 8P8C but there are RJ11 6P and 4P crimps also. The RJ45 connector slid in easy and hit the stopper without pushing through too far. A firm squeeze on the handles crimped the connector. The handles are just long enough to provide good leverage without using two hands to squeeze. The one con for the crimps are it doesn't have a ratcheting mechanism or a final click when the crimp is complete. But as long as you perform a full closure of the handles the crimp comes out great everytime. 2. Testers pros are the ease of use and versatility to use with RJ45 8P and RJ11 6P connectors. The testers attach together which is great when testing a short patch cable and can be reverse attached to keep the test ports on the same side. I used these between three floors without the need to constantly run up and down stairs to check connections. I was not able to find any cons with the testers. 3. Stand alone wire stripper - There's not much to these but it does work well. There are several different stripper positions for different sized cables. It is very easy to slide the cable into a smaller position and knick all the inside wires. Also you don't want to rotate the strippers around the wire too many times because it will dig in and knick the inside wires. As a bonus on the stand alone strippers is a punch down tool for seating the twisted pairs into a jack assembly. The only con i found with the stand alone stripper is it's not very heavy duty but to be honest I will use the wire stripper on the crimpers most of the time. Overall at this price this package is a very good deal and would be a good addition to a tool set. One last mention is this would not hold up well for everyday professional use but as occasional use this will hold up great.

This kit has everything you need to work with ethernet cables, and I mean everything. If you're someone who does any kind of networking work, whether professionally or just around the house, this is one of those purchases that'll make your life so much easier. The crimping tool itself is really well-made. It's got a solid feel to it – not flimsy or cheap like some of the budget options out there. The pass-through design is a game changer if you've never used one before. Being able to see the wires go through the connector means you can verify everything's in the right order before you crimp, which saves you from wasting connectors and having to redo cables. That feature alone makes this worth it. What really sets this kit apart is that it works with Cat5, Cat6, and Cat7 cables. That versatility means you're covered no matter what kind of cable you're working with. The tool handles all of them smoothly without any issues. The crimping action is clean and consistent – you get a good, secure connection every time. The kit comes with a bunch of useful extras too. You get the cable tester, which is super handy for making sure your cables are working properly before you run them through walls or ceilings. There's nothing worse than finishing a cable run only to find out there's a problem with the termination. The tester takes all the guesswork out of it. Just plug both ends in and the lights tell you immediately if everything's wired correctly. They also include connectors, which is great for getting started right away. The pass-through connectors that come with it work perfectly with the crimper. Having those included means you can start using the kit immediately without having to order anything else separately. It's nice when a kit actually includes what you need to get going. The wire stripper and cutting tool are quality pieces too. The stripper is adjustable and doesn't damage the internal wires when you're removing the jacket, which is important for maintaining signal quality. The cuts are clean and precise. These aren't just throwaway tools they included to round out the kit – they're actually useful and well-made. Storage is handled with a decent carrying case. Everything fits in there neatly, and it keeps all the pieces organized so you're not hunting around for different parts. If you're taking this to different job sites or just want to keep your tools organized, the case does its job well. The quality of the crimps you get with this tool is really impressive. They're tight and secure without being overdone. I haven't had any issues with cables coming loose or connections failing. When you crimp a cable with this tool, you can be confident it's going to work and keep working. For anyone who needs to make custom length ethernet cables or do any kind of network installation work, this kit is an excellent value. You're getting professional-quality tools for a reasonable price. It's got everything you need in one package, and all of it works well together. The pass-through design, the cable tester, the quality of the crimper itself – it all adds up to a kit that makes cable work straightforward and reliable. I'm really happy with this purchase. It's made working with network cables much easier and more efficient. If you're in the market for a crimping kit, this one definitely delivers.

Tested on CAT6A outdoor cable. Connectors are not one size fits all; so do your research. Find your cable specs and buy connectors made for them. The cutting/crimping tool works well. It strips the CAT6A cable I was using. It also crimped and cut off the extra wire from the staggered pass through shielded connectors I bought from a different brand. There is also a crimping tool for the fingers of the shielded connectors which holds it on to the cable. This function worked but not well. If i was a professional this wpuld be more important to me, but since I'm not I can pre-bend the fingers so they wrap properly. I wish there was an adjustable stop on the stripping tool to allow for consistent stripping without cutting too deep (a simple screw would work) but I don't think this is a feature on any tool like this. You're expected to regulate your squeezing pressure to avoid cutting to deep. Takes some trial and error. Only giving it 4 stars rather than 5 because the cable connectors and boots say they will fit CAT6A cable and they do not. At least, not the outdoor cable I am using. There are no specifications listed for the cable connectors or boots and this could be a very easily remedied. Typically these connectors list: the wire gauge they accommodate, the conductor insulation range they are made for, and the overall cable diameter the boots will fit correctly. I can tell you they do not accommodate 7.8mm OD cable and they do not accommodate insulated conductor OD of 1.14mm. I can't say what AWG they are made for because I couldn't even fit the wires in.

Great bit of kit, and essential if you want to do some DIY ethernet connections like i am. It is tricky to get the wired pairs in the connector in the right order and it took me a few tries to get my first successful termination. This where the diagrams and tester come into their own. The cable stripper is good and once you have done fiddly bit of wiring your supplied RJ45 connector, the tools crimp and cut works really well. Using CAT 6 cable i have succesfully created a ethernet LAN connection to my 4K tv and PS5 using this pack and a 1gig switch

Bra kvalitet och snabb leverans

bought this to replace an older crimper I had. was fairly easy to use and great for pull through connections. very helpful with having both a type and b type profiles on the side as I'm never gonna remember until the next time I do a crimp again

J’aime pu certir correctement mes prises réseau facilement grâce à ce kit complet. Le testeur permet de vérifier rapidement le bon raccordement des fils. Il faut néanmoins rajouter une pile 9V pour l’alimenter. Pour moi qui n’ai pas l’habitude de faire ces branchements, c’était parfait !

This review evaluates the “RJ45 Pass Through Modular CAT6 Crimping Tool” made by SOLSOP. The product was shipped with no excessive or wasteful packaging. What’s in the box: one (1) RJ45 pass-through modular CAT6 crimping tool, one (1) wire stripping tool, and two (2) spare cutter blades. First impressions: Good quality. Standard fit. Easy to use. If you have never used pass-through modular plugs, you have no idea how much more convenient and easier they make termination jobs! The installation process is quicker and more reliable; you don’t have to worry about a wire miss-feeding once you push it in. This crimper is designed for these connectors although you can also use this crimper on conventional modular RJ45 plugs too. The frame of the tool is made of heavy steel and is well put together. It has a built-in sheathing stripper that worked very well with different brands of CAT5E and CAT6E cabling that I tried. The modular plugs fit precisely into the metal shoe (not a plastic shoe like some other crimpers and the handle smoothly crimps the modular plug and trims the protruding pass-through wires in one clean motion. The crimper is non-ratcheting, which I prefer because it gives you more control of the cam-over at the end of the crimp. The protruding wires are cut perfectly flush as can be seen in my pictures. The crimper also has a convenient handle locking bar to keep the tool compact in your tool pouch. There also is a handy wiring chart for straight and reverse cables on the side of the tool. Only time will tell if this product has similar longevity and durability as other competitive products on the market. Therefore, I will monitor this product over the next 8-12 months of use and revise my review should problems arise. Cost-effectiveness and value: Overall I am very satisfied with the product, it is well-made, convenient, and easy to use. At a current price of $39.99, I feel it is fair value for the quality and functionality delivered. In summary: the “RJ45 Pass Through Modular CAT6 Crimping Tool” made by SOLSOP is made of good-quality material, is tough, and does the job well. It speeds up installation and reduces defects. I would recommend this product without reservation. Pros 👍: ✔ Heavy duty steel frame construction, contractor grade. ✔ Ergonomic handle. ✔ Built-in handle lock. ✔ Built-in sheathing stripper and wire cutter. ✔ Built-in wire straightener. ✔ Metal crimping shoe. ✔ Non-ratcheting crimp with cam-over. ✔ Replaceable cutting knives, 2 spare cutting knives are included. ✔ handy wiring chart for straight and reverse cables on the side of the tool. ✔ Wire pass-through design speeds up installation and reduces defects. ✔ Fair price and good value. Cons👎: ✘ None.