TP-Link Deco XE75 AXE5400 Tri-Band WiFi 6E Mesh System - Covers up to 2900 Sq.Ft, Replaces WiFi Router and Extender, AI-Driven Mesh, New 6GHz Band, 1-Pack

Replaced an older ASUS mesh system that was a daily headache to deal with for a 4,500 sq ft house on 3 levels. Decided to give this TP-Link Tri-Band WiFi 7 BE10000 Whole Home Mesh System (Deco BE63) a go. Based on my constant problems with my ASUS mesh system, I was expecting this to be a pain from the start. I was dead wrong. This took about 30 minutes (if that) to set up and get going, start to finish, and it works flawlessly in this 3 level house. Whole house is covered, about 70 devices, and it hums right along with no issues. I'm very impressed (and relieved from not having to deal with that ASUS fiasco every day). I've only had this now for a couple of days, but everything is going well so far. PROS: 1. Setup was simple and straightforward via the Deco app 2. It worked perfectly out of the box - no hassles or hiccups 3. Enough flexibility to set your router's address and the DHCP range - if you have a lot of static IP addresses this makes transitioning to the TPLink much easier 4. Speed is great - I haven't benchmarked it, but it no one has noticed any lagging on any devices, multiple 4k TVs, etc. CONS: There are a couple of things - 1. What idiot designed these power adapters? First, they're HUGE. The way it has to be plugged in it takes up 3 outlets on a power strip. There's no reason a power supply has to be that large. Second, the flimsy power cord is way, way too short. Someone really dropped the ball in design of the power supply and cord, particularly for a $450 router. 2. The router has a USB port on it. (in fact each of the 3 units has the same 3 RJ45 and USB ports, but the USB for the main unit (the first one you set up and go through the installation) is the only one that you can hang an external drive off of and access it.)) I plugged an external hard drive into the USB port and was able to share it via the Deco app - the one catch is that you can't just create a share name, such as "backup". The router adds a "G" so that in order to use the share, it must be used as \\your.router.ip.address\G\backup ...not really a big deal, but I have many computers that run backups and I had to go reconfigure them to add the "G" to the network path. Other thoughts - You're forced to use the Deco app on a phone or tablet to manage the network. There is a webpage interface, but it's basic stuff only. That said, I'm pretty impressed with the Deco app itself - seems to have all of the needed features without a lot of stuff I don't really use or need that I had in the ASUS and have seen in other router setups. There is a basic level of security included for free, but TP-Link offers additional tiers of security. I ended up adding the Security+ ... but they also have a tier that includes advanced Parental Controls, VPN, Password Management, and several other things, for more money of course. So far so good on all of my IoT devices too. If you're looking for a router system with great coverage and speed that you don't have to muck around with daily, this appears to be a solid choice. I'll update this review if anything changes.

I am a techno-geek. Have degrees in electronic engineering and in computer science (networking). Have been working in the computer and telecommunications fields for the past 45 years. Way before Al Gore even invented the internet. I have a ranch style house with full basement; approximately 3,000 sq feet + 2 car attached garage. I normally have 2 routers active; main router for all ethernet connected devices as well as providing VPN connection (Linksys WRT3200ACM); which also connects to the 2nd wireless router a netgear R7000 for my normal open WIFI for non VPN traffic and guests. Both routers are in the downstairs, centered, and work good. The VPN router/WIFI covers the areas of the house for fixed/PC/Laptop that use VPN; but the netgear providing clear WIFI couldn't cover the entire house with a usable signal; even though the R7000 is a very good high end wireless router. It covered MOST of the house, but none to the garage and very little outside front or back; and a couple of sketchy places in the house. I tried wifi extenders and even another router as an access point. Problem with those are there is no smooth transition when walking around with a cell phone, tablet, taking laptop out on the back deck, and other mobile scenarios. Great if you're going to a spot and staying there; but extenders and AP are not good if you're moving around. So, I went with a Mesh system; the TP-Link AXE5400 XE75. This has been awesome. Setup is easy, just follow the app instructions. I left my primary Linksys VPN router as is, and simply removed the Netgear R7000 and replaced it with the TP-Link. (Yes, double NAT is fine for 99% of traffic; IF the primary router, in my case the linksys, is set up properly to allow traffic flow to the TP-LINK to work properly). Anyway; the main TP-LINK router is where the netgear was, and I wireless connect the second slave node on the main floor. This is working great. My VPN linksys wired/wireless router still covers the 2 home offices that use the vpn; and most of the house for the other rare vpn occasions. The new TP-Link XE75, between the downstairs node and the main floor node, are covering every inch of the house, garage, back yard, and front yard. And being I gave it the SAME SSID name and password that the Netgear USED TO BE, I didn't have to change any settings in ANY of my wifi devices. Not even security cameras, Roku, AppleTV, phones, tablets, laptops, etc... All the devices were instant connections. And when I roam around the house, yard, deck, etc... the portable devices like phones and tablets transfer from the one node to the other node seamlessly. I was considering getting a 3rd node, but after using this for the last month, there's no reason to spend more money. This is the best setup I could have wanted. Definitely buy it if you need PORTABLE WIFI COVERAGE for phones, tablets, etc... that move around a lot. If your devices are pretty well fixed and don't move, like streaming tv boxes, smart tv, laptop/computer in an office, etc. then learn to better position your existing wifi router for better coverage or look into using an extender. Extenders are great if you're staying in one place; because it's shows a different SSID than the main and your device can't auto switch between them. But for fixed devices or scenarios where you stay put for long periods of time, extenders are great. Especially for the cost of the TP-Link. I got it on sale, but an extender is still much cheaper. But if you need the mesh technology so you can be more mobile with uninterrupted connections, then this is the mesh wifi for you.

Working fine but i cant connect my WIFI 7 devices to this, i mean our android phone is showing WIFI 6e and sometimes WIFI 6 but haven't seen WIFI 7 yet

أضفتها الى نظام ديكو وتعرف عليها بسرعه

Love these things. I set these up as a mesh system for the ground floor, which doesn't have any router signal. Just connect one of them by Ethernet, then let the rest repeat off of that. You'll get great coverage for the entire ground floor. Also, setup is super easy as TP-Link has a great app for this. Thinking of buying another pack just to extend coverage even more.

So far so good. Helped a lot with Network Quality and speed

Te permite crear una red de 2.5 a 5GHz, una de 6GHz y una MLO de 5 y 6GHz, además de crear una red para invitados, aislar dispositivos de tu IoT. Con 2 cubre perfectamente 200m² y atraviesa paredes sin tanto problema. Se acabaron mis problemas con la disponibilidad de mis dispositivos.