eXtremeRate 7 Colors 9 Modes NS Joycon DFS LED Kit, Multi-Colors Luminated Black Classical Symbols ABXY Trigger Face Buttons for Nintendo Switch & Switch OLED Model Joy-Con - Joycon NOT Included

At first I didn't know what shells I wanted to put these into and I hadn't seen any reviews with pictures of pink/green shells so I decided to start with those. I attached video/pictures so you can see the bleed on them. To put them together I followed the video by extremerate, so I won't give you instructions here because it's an excellent video. I will say you can probably put these on without removing the vibration motor if that connector is being difficult to remove. I checked to make sure the lights worked at the point in their video where they say to, and they did, so I continued. When done, the right joy con was perfect, but on the left some of the red and green LEDs were out. I got busy and didn't open them to see if I could figure out what was going on for a while. They were good enough and I wasn't sure I would keep the shells. When I finally decided I wanted to put them in the purple/blue gradient shells I got from extremerate and opened the joy con, I found the broken LEDs only worked sometimes when they were at a certain angle. Then I looked at the warranty card and saw they had a 6 month warranty and I counted how long it had been: 7 months. Oops. But I decided to use their retail email anyway (and included the video clip of it not working) and asked if I could get just the left side board. I didn't need anything from the right side or the buttons, so I didn't want to pay for a whole other set if I didn't need to. They simply asked for my order number and address and shipped me a new one, no charge! I installed it (checking that it still worked multiple times along the way) and it works perfectly! I'm incredibly pleased with theis LED kit and with the company as a whole. I highly recommend them! If you do buy this product I'd definitely suggest you watch the video first to make sure you know what you're getting into, then when the time comes take your time with it. It's fine to take breaks when you get frustrated or just need to do something else for a bit. And keep checking that it works along the way. Good luck and enjoy!

This is a good product, with a high skill ceiling for installation that I do not recommend normal people try. The product is of decent quality, and even if one or two of them fail, the company is more than willing to work with you to try to problem solve issues during the installation. They will even send new LED parts if one doesn't work like it's supposed to, you just have to email them through their support link (they will usually get back to you within 24 hours). So the service and raw product I mark highly. Where I will offer a serious warning is the installation itself. This is not an entry-level mod, and even if you follow the directions closely, you can easily mess something up and end up with a controller that (A) doesn't close properly, (B) doesn't work correctly, or (C) closes and seems to work but doesn't charge. Combine that with the fact that you will have to take apart the entire controller to install this, including disconnecting all of the delicate ribbon cables and unplugging the battery and wireless card, and you have yourself an install that even a tech could mess up if they aren't paying attention. It's not impossible to do this for the first time if you have no experience doing mods, especially if you follow the video closely, but understand that a first-time attempt with little experience will take you at least 3-4 hours to accomplish, more if you're being extra careful. Trying to rush it faster than that will most likely result in failure. That said, it's a cool product if you do the install correctly, isn't that expensive, and combined with the company support can, with difficulty, be completed by a first-time modder.

This set broke my joycons. The yellow tool they give you to unlock the caps for the conduits took off metal teeth and my joycons no longer work. I dont want ANYONE to experience this since they wont replace the joycons with their faulty tool. This is absolutely insane and wrong

I got this item so that I could build fully customized joycons for my girlfriend for Christmas. And WOW I'm amazed... this install is a little bit more complicated than some, but their video they provided made it insanely easy. they look phenomenal, very bright and no flickering whatsoever. They work amazingly even after almost 4 months of constant use. unfortunately my right one did not work when I went to install it due to shipping issues, but when I brought the issue up they sent me another one completely free of charge! my girlfriend absolutely loves the lights, and I'm most likely about to order this kit again so I can build my joycons. Completely worth every penny!!! P.S. please ignore my fingernails in the video, I got home from work and instantly started the build on the joycons...

After having re-shelled another set of joycons as well as re-shelled and added LEDs to a pro controller, I decided to tackle a second pair of joycons with this LED kit. I want to be clear that this is a PROJECT and is not “easy” to install (unless you’re a pro). Don’t expect to be done in 30 minutes - set aside a few hours. Also, if you are not already comfortable with switching out the shell and buttons on a pair of joycons I would not recommend this - you need to be comfortable with the basics first. If/once you are there, this is well worth the effort! The LEDs look great and it’s easy to change the colors whenever you want. I also have not noticed a significant impact on battery life with this or the pro controller kit. My only issue is that the light isn’t super visible for the ZR and ZL buttons for me - I could not figure out the exact placement for the LED strip for that bit to make it look better. Other than that looks great. There are also not a ton of good YouTube tutorials for this one. For other mods I’ve done I’ve followed tutorials from mrmario and CTA but neither have one for this product as of now. I wound up using the one from sthetix

Quality is pretty good and overall happy with the installation and look. If you've done a shell swap for the joycon before, the installation will be relatively easy. My biggest issue is that the LEDs dont automatically shut off when the device is off and inactive, they will just stay on forever, until the joycons battery dies, or you manually turn it off. So when I'm using the switch in handheld mode, if I want the lights on I have to remove each joy con to turn the LEDs on. Then when I'm done playing, to turn off the LEDs, I have to remove the joy cons again, turn each joyncon off manually, then put it back on the switch. It's pretty annoying and I dont see myself actually doing this each time I want to use the system. So the LEDs just become I conversation piece if Im showing it off to someone.

First, I will address a couple of negative things from other reviews. 1. Only one side works. - it happens. Their customer service is excellent, and if you experience this, contact them, and they will send a replacement until you are satisfied. 2. The instructional video is too small and you can't see what they are doing. Well use your PC instead of your phone (if you have one), and this is not a problem at all! So my experience is that it is well worth it. The first time taking apart joycons is scary, but the video is amazing and if you take the time and follow the instructions exactly, you have nothing to be concerned about. I have the white joycons, so there is some light bleed-through, but I am going to purchase a joycon-safe skin anyway, and that should solve that. I absolutely love them, and would buy them again. Hopefully they will make them for the switch 2 eventually.

The kit quality is really great. Joy cons are TRICKY to work on and have a ton of really small parts packed in. This mod requires essentially a full tear down and rebuild of the controllers. Read through the instructions with the video linked beforehand and it shouldn’t be an issue! Lights shine through the buttons really well and were the final touch needed for my “Hylian Switch” build! I’ll also note that I got joy on drift shortly after completing the mod and damaged the right LEDs while replacing the stick. I contacted the seller through their website and they sent a replacement after just a few emails to collect order and shipping info — great customer experience!

Easy to install, you can find a full install video from the company. I compared the price with buying straight from their website, it is not worth it for Canadian to buy directly from them, Amazon is cheaper.

Es hat ein sehr netten Kunden Service bei mir hat die Rechte Platine nicht funktioniert ich habe den Kunden Service darauf angeschrieben und sie haben mir eine neue Platine zugeschickt. Die Knöpfe haben eine sehr gute Qualität und mit der Anleitung auf Youtube ist es kinderleicht Es ein zu bauen.

I’ve been using ExtremeRate parts for many parts on my Switch console and it was disappointing to experience that this component fails in every regard. Purchased the kit twice, both had the same defect that the left FPC doesn’t work. My joycons work fine without them and installation of the right joycon doesn’t have any issue. This defect (quality of left FPC) has been reported a dozen times on their channel and it doesn’t seem that the supplier is looking into this. Buyers beware. Although the support desk is fast to reply and send replacement parts it doesn’t resolve the quality issue of this part which likely resides in the production line.

Han sido muy sencillos de montar y muy bien explicados en las instrucciones, lucen de maravilla lo único malo es que consume bastante batería si las tienes encendidad

Le résultat est magnifique. Le côté gauche ne fonctionnait pas après le montage. J'ai contacté le SAV et une semaine après, le nouveau kit LED gauche était là. Tout fonctionne parfaitement.