Spigen 2 Pack NeoFlex Screen Protector Film for Samsung Galaxy S22 Ultra

The product itself is easy to install onto your S22 Ultra. You don't need to use all the sticker removal tools. Just wipe your screen, spray on the liquid to the screen and put the protector on it loosely to configure it correctly.

Finally a screen protector that actually allows the finger print reader to work on my Galaxy S22 Ultra, this is the 3rd screen protector I have tried. It was a bit of a faff to put on, but once done done it has worked 100%, flawlessly, it feels good and fits very well, it's def not the cheapest screen protector, you get what you pay for. Many thanks

Ok but not as good as gorilla glass but not the cost of glass. Reasonably easy to fit but still ended up with bubbles even though I was careful. Not sure how good this would be if you dropped the phone I think it just stops scratches and marks.

I've used Spigen products for many years now , for me they are the go to brand for cases and screen protectors. I bought these screen protectors for my new Samsung galaxy S22 ultra as it stated they were compatible with all Spigen cases. The screen protector fits the screen nicely although there is a small gap at the bottom and around the edges but I expect this is to allow a case to be fitted without it catching. The install instructions look complicated but if you follow the instructions and install video you won't go wrong , so far so good 👍🏻. Now I've had the screen protector on for a few days I'm not so impressed ! The soft film marks very easily and does not come out again , you can drag you finger nail across the screen and it will leave a mark that will not go away. I'm very disappointed with this product from Spigen especially by the amount they charge for it , I would have expected more from them. I personally would not recommend this product and wish I went with a glass one instead. 2 week update on this review - Absolutely awful screen protector , worst I've ever had ! After 2 weeks of having the screen protector on I have found that it is very difficult to keep clean , dirt and debris seems to stick to it even when cleaned with a damp cloth , you can try and scratch the bits of dirt off but then you are left with a mark on your screen because the film is so soft. You can either live with the dirt on your screen or scrape it off and have marks all over your screen. I would 100% not recommend this screen protector especially at the price ! Real shame as Spigen are usually top notch.

I have tried 4 different screen protectors for the galaxy s22 ultra, this one was the best one despite some of the reviews. The glass protectors are obviously stronger than these film ones however not a single one of them works with the fingerprint reader despite them claiming they do. Even the official Samsung one which is fairly easy to apply doesn't sit as well as this Spigen one as it has so many bubbles after installation and it also failed on the first day, it ended up with a hole on the screen protector. So far the Spigen one is good and the fingerprint reader works flawlessly, I can't comment on reliability or how durable it is yet but time will tell and also I've ended up ordering the clear view cover which covers the whole of the front anyway so hopefully this protects even further.

Firstly, the screen protector works as stated, a little soft so you might find indentations etc might stick around for a while, but so far no issues with the fingerprint reader. My biggest issue stems from the actual installation itself. There are none of the usual tabs connected to the protector, so touching the "sticky" part of the protector pretty much unavoidable, and as far as I could find, the link for the installation guide doesn't actually seem to have the one for the S22 ultra for this particular product (probably mostly universal so not a huge issue). The tool given to push the water out from under the protector is made of card and pretty much disintegrated after the first use. And whilst 2 protectors are included, if you're like me you'll end up ditching the first one due to dust/grease etc getting caught under the screen as you tried to wrestle it from the sheet.

Habe die Schutzfolie für das Samsung Galaxy S22 Ultra gekauft. Ich fand die Installation einfach, und nach 12 Stunden ist die Folie so gut wie nicht mehr sichtbar. Sie ist Blasen und Hubbelfrei. Der Fingerabdrucksensor funktioniert 1A. Fingerabdrücke bilden sich nach einiger Zeit (Und das ist kaum vermeidbar), gefühlt dauert es aber um vieles länger als wie z.B auf Panzerglas. S-Pen Abdrücke gehen nach einiger Zeit wieder weg, wenn man nicht zu stark drückt. Nun zur Installation der Folie, so wie ich es mit TPU immer mache : Nach dem Auspacken habe ich das Gerät so gut wie möglich gereinigt mit Microfaser und Alkohol. Ich fand die Installation alles im allen sehr einfach und durch die Flüssigkeit die man auf das Display + Hände sprüht auch sehr flexibel. Die von einigen hier kritisierten Blasen oder das die Folie abgeht, sind in meinen Augen reine Anwenderfehler. Mann muss : 1. Das Display 200% Staub- und Fettfrei haben, also sollte man das nicht unbedingt im Wohnzimmer machen. Hände sollten vorher gewaschen und damit trocken und möglichst Fettfrei sein. 2. Flüssigkeit großzügig auf die Hände und Display aufbringen. Lieber bisschen mehr als zu wenig. 3. Folie vorsichtig und möglichst grade aufbringen, und minimal verschieben und glattziehen wenn es nicht direkt 100% passt. 4. Danach das Wasser und Blasen rausrakeln, das ganze vorsichtig von der Mitte zu beiden Aussenkanten drücken. 5. Wenn das sauber gemacht worden ist, sollten schon sehr wenige Restblasen und Hubbels sichtbar sein. Jetzt kommt wie auch schon andere sagen das wichtigste : Kanten nachziehen, aber von Display zu den Seiten leicht schräg. Viele (Selbst erlebt) machen das Schlicht falsch und rakeln am Rand vorbei von oben nach unten. Damit verzieht man die Folie, und sie wird sich lösen. 6. 6-8 Stunden ruhen lassen, damit die Restflüssigkeit trocknen kann. Nach 12 Stunden liegt die Folie absolut glatt auf. Alles im allen Spigen ! Top !

Easy to install and comes with everything you need to I stall is bubblefree

I recently had an expensive glass screen protector fitted at a kiosk. It looked great, but lasted about a week before cracking. I had this as a backup in the drawer, but I'd been avoiding using it because I thought it the process would be epic. After watching a quick application video (worth watching before you start), I installed the guard in about 20 seconds! It was so easy. Next challenge: Wear and tear - I had read the guards get micro-scratches but it has been a month and the guard still looks pretty good, I think you would have to be storing your phone against keys (or similar) to really scratch it up. And the best part is that it comes with a spare, so when this one gets really scuffed up, I can just easily replace it! Great guard!!!

I tried GlassDome previously, although it saved my screen, the protection layer got destroyed and had to be replaced. Having that said, finger print didn't work properly, trying to record on WhatsApp was not working properly (given the location on the extreme side). With this I can use my phone as if I don't have a protection screen on. Only test remaining which I hope I don't have to again, is a drop test :). It was pretty easy to install as well.

This Spigen product is the worst one that I have ever bought, it is a terrible product, I watched the video and that looked pretty simple, but it started already bad when I was trying to get the backing off, then the product is so flimsy that it is hard to get onto the screen straight, the because the s22 phone has a rounded edge I could not get the product to stick properly, I will not recommend this product.