Cooler Master NR200P MAX V2 Mini-ITX PC Case|AIO|PSU Ready, Included 280mm AIO, V850W SFX Gold 90° PCIe 5.1 PSU, Designed Ready Nvidia RTX 5080 | AMD RX 7090 XT, 357mm Vertical GPU Mount, DIY

The TLDR is that this case is great. I bought another to build a new work computer, and both cases are keeping cool. I did replace the fans with Scythe 140mm fans on the radiator and 120mm slim fans for the bottom on both my home and work builds since both are similar enough. It's been a while since I built a computer and kind of set it and forgot about it. I've dusted out the home machine once since I got that one. Otherwise my only gripe was the paint on the original case but again, that literally buffed out. The second case didn't even have much in the way of spots on the paint or anything. ---------------------------------------------------------------------- Original review below: I had an original nr200 that I moved an old itx build into about a year ago and loved it. I honestly wish I had kept it instead of selling and keeping my atx build. But I probably wouldn't have gone with this then. So, it's a win. After waiting 7+ months for this case, between seeing it in reviews and not knowing where to get it until it hit Amazon/Newegg, I'd say it was worth the wait. This comes with two minor caveats, for me at least, that I can't imagine many people have run into. I got my *first* delivery and was missing the riser cable and one of the pcie power cables. The box looked unopened so I'll say it was a packing issue from the factory. I did try to just go through the order page to exchange it but was only given the option to return. I'd imagine this is due to the cost of the item as a whole. A call with an Amazon rep got this turned into an exchange. The second little gripe I have is with the paint. On the first and second item, the paint looked a little weird. Not really scuffs but I had to take a little polish to the panels to clean them up. Not a big deal, but if someone is paying close to or over 450 for this great package, and technically for a specific color, I would think the qc on the paint would be a better. I popped an x570i Strix board with my 5900x and Strix 3080. Everything fit like a glove. The cooler does have a little whine in the pump but I keep the machine of to the side and have a fan on most of the time so it's not audible. I did change the top fans out though for the Silverstone Penatrator ARGB fans to get a little more flair but the stock fans were more than capable of get the hot air through the radiator. I matched these up with their 120mm Slimmer fans. If you don't already have a computer built or want to downsize from an ATX build like my situation, this is the way to go. Be weary that the psu comes with 2x PCIE power cables that have 2 plugs daisy chained each. I don't really see this as a problem but I know there are disadvantages to this according to the internet pc building gods. I had a custom cable made anyway to add a third and there are plenty of people on etsy that can provide such a product or a full set of cables if needed. I paired this with a set of those 90 degree adapters too so it looks extra clean. I think if Coolermaster sold this version of the case, without the psu, cooler, riser, etc, for the same price as the normal nr200, I think they'd still sell a ton. Great case overall, probably never going mid/full size build again because of it.

Bought it in 2024’s Black Friday ($280), so just over a year now. Pretty tight fit, but that’s what this form factor is all about. I have an RTX 4070S with three fans and had no issues whatsoever fitting it in this case. The AIO is more than enough for my 5800X3D, never goes above the low 60s C. I’ve set the fan curve in fan control really gradual and it’s near completely silent most of the time (I play some GTA V enhanced and MSFS 2024). Great quality, all cables come pre-attached and with the precise lenght you need.

Fits with PNY RTX 5080 OC graphics card (Triple fan). I bought this to replace a full tower case to have something easier to move and it works great for that. It is still a bit on the heavy side but feels well built. My one very trivial complaint is that there isn't a screw to hold the side panel on. The fastener seems to hold fine but it would be nice to have an optional screw to make it a bit more secure.

In summary, I love it! The NCORE 100 Max is a great case for a small form factor (SFF) build. I've been building my own computers for over 15 years and if this is your first SFF build like me and you need the smaller components then the price tag isn't excessive for what you get. If it goes on sale for $350 or lower it would be a great value. If your gaming like me, you'll probably want to do some stuff to bring overall system temps down, if not this system is good to go as is. Fits my full size Gigabyte RTX 4080 Gaming OC. 10 out of 10 would buy again. Read on for more detail. I really love aesthetic and functionality of this case and have put a lot of effort into improving it without modifying the case physically. That out of the way there are a few issues I noticed and have seen others complain about. The fans are a little noisy at higher speeds and if you are doing anything intensive they will need to spin up, but easy to upgrade if you want. I replaced all the fans including the PSU fan and now it's super quiet and temps are even better, do the PSU at your own risk though cause that will void the PSU warranty. AIO pump is also a little noisy above 50%, maybe I was just unlucky there. The other issue I had was with temperatures during high demand games like Cyberpunk and Avatar. Is it safe, maybe, but I have concerns for longevity. My reported system temps read like they were acceptable, 7800X3D was in the mid 70 C range. That thick 120mm AIO does a pretty good job. However, I touched the case and back of the MOBO and it was hotter than I am comfortable with. I would guess the case and MOBO was sitting in the 90-100 F range. The problem is the air flow over the MOBO and GPU is subpar because the case relies on the exhaust fan to pull air in and due to the holes being all over the income air is not coming in over the MOBO like it should. If you don't want to try and figure out how to get more fans on this thing I bet you could improve air flow vastly by blocking the all vent holes on the upper half of the case above the MOBO (except over the PSU). Air would then pull in from the bottom and move up and out. My solution was to add an external 140mm fan over the MOBO (no more room for any fans inside) and now my temps are perfect, GPU side is still a bit warm but acceptable.

Really good SFF case, especially since the power supply and all the cables come prerouted, and the AIO head is already perfectly lined up for where your CPU will be. I would look at the PSU and remove any cables you don’t need before you put anything in, as it will be very cramped with all of them in. Preinstalled fans are a bit loud, but you’ll be fine turning them down a bit, as I haven’t seen my CPU (ryzen 9 9900x) hit more than 78ish degrees, even under heavy load. Since the GPU is right up next to the side of the case (if you’re using the vented side panel), it gets access to fresh air, so those temps are also great. You will need at least 1 15mm height fan for the bottom, as a 25mm will not fit under the PCIe riser cable (even with trying to force it a little). Overall an amazing case to start building SFF computers.

…das Netzeil. Es ist leider sehr Laut bei Grafikintensiven Anwendungen. Selbst wenn keine Last mehr anliegt, ist der Netzteillüfter der einzige den man hören kann (und das sehr laut!). Das restliche Gehäuse ist ansonsten sehr gut. Und es ist etwas größer als erwartet.

J’ai acheté le NCORE 100 MAX pour monter un petit PC facile à transporter lors de mes déplacements, et je suis franchement impressionné. Le format est super compact, parfait pour voyager, mais sans compromis sur la performance. Le boîtier est bien pensé : gestion des câbles propre, bon flux d’air et espace suffisant pour accueillir une carte graphique haut de gamme (jusqu’à 3 slots épais). Le refroidissement est déjà inclus et efficace, ce qui évite de devoir acheter un AIO ou un ventirad séparé. Malgré sa petite taille, ça reste silencieux et stable même avec une grosse carte graphique branchée. En résumé : idéal pour ceux qui veulent un PC transportable sans sacrifier la puissance. Je recommande à 100 % pour les gamers et créateurs qui bougent mais qui veulent quand même avoir une vraie machine de guerre dans leur sac.

I got this case recommended by my friend and I received the courier within 2 days after the order. The product was genuine and there were no damages. It was easy for a newbie like me to get this assembled and all the components are well build. Liked the way it looks and the grey color for the max version looks pretty good to me.

En un mercado tan minoritario y poco explorado como lo es el de las computadoras de alta gama en bajos volúmenes de espacio, es muy agradable encontrar sorpresas de este tamaño. Si bien el gabinete NR200 y el NR200 MAX no fueron nuevos en el mercado, la version NR200P MAX viene a corregir algunas cosas algo molestas de la versión anterior a cambio de cerrar las opciones de montura de la GPU y de colocación de enfriamiento de CPU. Empecemos hablando de su lógica y bien planteada idea de flujo de aire, aquí nos dan preinstalado un enfriador líquido de alta gama con 2 ventiladores enormes que sirven de salida de aire caliente. Mucha gente tiende a decir que esto es un error. Pero pueden ver qué en realidad las cosas de mantienen a una temperatura muy buena en general. Todo viene preinstalado y colocado de forma lógica y tranquila para la construcción. Prueba de ello es que la fuente de 850 watts tiene cables completamente personalizados, con una longitud medida a milímetros para quedar perfecto en el 99% de placas base Mini ITX del mercado. Su sistema de montura de discos 2.5 es sin herramientas y perfectamente seguro, sumado a ello, los cortes de la parte posterior del gabinete son todos brillantes y muy bien colocados. He podido reinstalar un SSD sin dolor, sin desarmar nada, solo sacando la tapa posterior del gabinete, sin ningún problema. Hablando de las tapas, nos incluyen una hermosa de cristal templado y todas, absolutamente todas, se pueden quitar sin necesidad de hacer uso de ninguna clase de herramienta. Las tapas con agujeros de respiración son ambas idénticas, quitando problemas de confusión y te brindan además guías puestas incluso en el mismo gabinete para saber qué movimientos debes realizar para su instalación y su remoción. La bomba de agua es sorpresivamente más silenciosa de lo que yo creía y bajo carga muy estresante mi GPU bajo en promedio 15 grados de temperatura de lo que tenía previamente, en mi gabinete RVZ02. Por esta razón, le doy 5 estrellas, porque veo a mucha gente seleccionando este gabinete para quedarse con el durante varias actualizaciones de GPU y CPU (En especial para AMD, ya que es compatible con AM5). Recomendaciones; 1.- Recomiendo verificar la compatibilidad de la GPU con el gabinete previo a la compra. No me mal entiendan, se puede incrustar el 98% de las cosas porque sacrificando un poco la altura del gabinete y la posibilidad de colocar el GPU "acostado", este gabinete nos permite montar cualquier GPU con PCI 4.0 en el. El problema es que algunos ensambladores de gráficas están llegando al absurdo de poner tarjetas que requieren hasta 4,5 slots, lo cual además de innecesario y ridículo, evitaría que ustedes puedan colocar este gabinete en su setup. 2.- Verifiquen la compatibilidad con Intel. En serio... Gracias Intel, no sabes cómo amamos que cada nueva generación cambies a propósito el socket de enfriamiento para las CPU. El gabinete viene con 4 sockets diferentes para Intel, y soy el primero en saber que no es suficiente. Verifiquenlo. (GRACIAS AMD por hacer el socket AM5 compatible con todo AM4) Puntos a mejorar; 1.- Precio. No me mal entiendan, es un paquete 5 estrellas porque las piezas están 100% personalizadas para esta implementación. PERO, en ofertas puedes comprar sin problemas; 1.- NR200P, 2.- Fuente SFX de 850 watts, 3.- Enfriador de alta gama de 2 ventiladores en el radiador... Y todo eso te puede salir entre 50 a 100 dólares más barato de lo que tenemos aquí. Si, vas a tener que lidiar con algunas cosas molestas de la versión anterior del gabinete, como la altura extra o cosas como que la colocación de la fuente es muy cercana a la motherboard y por tanto tendrás que pelear mucho con los cables de longitud estándar. Así que... Cae en ustedes si el tener más comodidad justifica el precio extra. 2.- Color. Alguien más sabio que yo dijo una vez; "Puedes pedir el color que quieras, mientras sea negro." Y aquí no existe esa opción (detalle muy menor) Veredicto final. Este es el paraíso de construcción Mini-ITX. De calle. ¿Es tu primera construcción de PC en tu vida o es tu primer PC Mini-ITX? Felicidades, no busques más. Este gabinete tiene absolutamente todos los argumentos para convertirse en el favorito de absolutamente todos los constructores de este tamaño entusiasta. Si bien, se le pueden señalar cosas como que es algo grande con sus 11 litros en volumen, Cooler Máster sabe aprovechar cada centímetro cúbico disponible para permitirnos tener seguridad en nuestra construcción y en nuestras temperaturas. Tiene 5 estrellas por ser un producto excesivamente completo, a pesar de su precio que puede ser considerado premium.

Had an eye on this case for a long time, bought it on sale and having the cooling included keeps the wallet puffy ;)! Very good packaging, all is included, good installation instructions on the website with details of GPU sizes to fit. Very satisfied with the purchase, will still hunt for another one.