ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing Mint Green 1000g

I was concerned at first but Elegoo makes a very solid resin. I recommend this on in the v2 to anyone.

Update: I feel like you can’t beat Elegoo support. They reached out and wanted to make it right. They are replacing the resin. If anything they deserve the 5 stars for great support. I’ll try the new bottle and update.I’d say that if you purchase anything Elegoo you’re covered.I love my Elegoo Saturn S, and thought this resin would be a sure thing. It was anything but.

printer: creality halot onesettings: default from printerprint quality was excellent , durability and the same as abs.I will be buying this product again

Looks like what I wanted

Perfect exactly as I ordered, love the way this resin prints I highly recommend it, the color is also gorgeous!

This resin has been very difficult to use and there is not a lot of support for print settings and post cure processes. If your a beginner, I would suggest getting a resin that is not translucent. After some reasearch and talking with colleges, I have found that the clear resins tend to have some special characteristics:- The UV light will bleed through while printing, causing the prints to have additional half cured drippy surface. I have found that this can be taken off between wash and cure, but it is a tedious extra step. This gets better with slower lift speed (I use 60mm/s)- The cure time (for me) of this resin is 9s (elegoo Saturn s [monochrome]). This is much longer than what is documented on the website.- The viscosity of this resin is very high. It is advertised to print best at 20-25c, but my reasearch has told me these structural resins print better at 30c. I will be trying this soon.Edit: printing at higher temperatures helps a lot. It lowered my cure time and allowed me to use a faster retract speed.

This is some good resin. I haven't strayed far from the brand that my printer (Nova3D Elfin2) came with, but I wasn't happy with their white. As shown in the photos after curing Nova3D's white turns almost a sepia color... if you will? This ELEGOO ABS-Like Rapid Resin stays white or at least a better shade of white.I posted a photo of an octopus, it's the test file that comes with my printer, that guy has sat outside for a few weeks at this point. Still just as white as ever. In the other photo, I printed some wall mounting brackets for my Bose SoundTouch monitor speakers. On the left is the Nova3D Resin and on the right is the ElEGOO ABS-Like.This stuff is great for printing lithophanes. It's successfully printed up to .1mm layer height (for faster printing).The Bose Bracket and the Octopus are both printed at .035mm layer height. Honestly unless you're looking and not-post processing, 99% of the things I print in resin now can be printed at .1mm layer height. A layer of paint covers up almost any layer marks, plus this stuff is strong.I will have to post a question to the maker.. I'm unable to dial in the perfect first layer settings.... Everything I try this thing sticks to the build plate like it was supposed to be married to it. I end up breaking the model by trying to force it off. The only way I've come around this was just put supports on everything, even the base, but with the Nova3D Standard Resin I didn't have to do that, it comes off perfectly (with just a tad force).I have been using the clippers that come with my printer as a trick to get the model to lift up, then once it's given up a bit of the adhesion I use the spatula... anyone recommend a new way? I'm new to resin (5 months)

***UPDATE: still great customer service, however the heat deformation temperature is NOT 80C. I heated some prints to 65C for cerakote application. They cracked. It’s bad and I’ve attached pictures. If you need the heat resistance, look elsewhere (note that siraya blu also does this).Abs like is a great all around resin. I don’t print minis, but rather functional parts. There’s little shrinkage and I don’t have to scale my parts. Stuff is pretty strong - not as strong as Siraya blu, but ABS like is significantly easier to print with. You don’t need a heater to print this stuff (I still use one, since I need to be at 25-30C for Blu to print).It’s got a bit of flex on thin parts so if rigidity is what you’re after I’d consider looking elsewhere. By no means is it ‘flexible’ (like Siraya tenacious), it’s just not super rigid or brittle.My only two gripes with this product are the odor and packaging. For small prints the odor is kept in the enclosure, and with the use of Elegoo’s mini filters (on a Mars 2 NON pro) you can’t smell it until you take the cover off. However, large prints are very noticeable regarding odor. I have my printer in a grow tent, and if I’ve had the cover open for a while it stinks up my basement (still running the mini air purifiers. Their capacity is honestly just the area of the printer itself since they’re so small).Siraya Blu gives off much less odor than ABS like. I’ve heard people say the opposite, but I can tell you that in my experience (and those I live with), that ABS like produces more odor, and it smells worse. Siraya blue gives off a bit less, and smells vaguely of lemons which is weird.The packaging. The caps are infamous for breaking. The top pops off and resin goes everywhere. Not fun. Not fun at all. So make sure to hold down the top of the cap when shaking and to be safe I now wrap a paper towel around the top. I had one explode, which obviously made a mess. I contacted Elegoo with pictures and they’re sending me a new bottle, which is awesome. Very pleased with their customer service

Su resistencia mecánica no es resaltable pero es de esperarse por que es para prototipado. La calidad de los acabados que deja son excelentes.

They sent a opaque blue resin instead of clear. And the resin curls up a lot and parts don't print with details and look washed out if given proper exposure time. By reducing exposure time to preseve details, the prints break off the bed and stick to FEP.

Esta bien buscaré de otra marca el mismo color a ver si todas son igual de pegajosas, pero funciona bien

I am very certain the resin that arrived was in an Elegoo bottle, but not actually Elegoo resin. The stuff I received wouldn’t even cure correctly. Order from the Elegoo store directly.

Good quality resin, exhibits the properties of ABS.