Masterbuilt® Vertical BBQ Smoker 10-inch Leg Kit Accessory Extension with Rear-Mounted Wheels in Black, Model MB20101114

This product was very easy to assemble and took me about 30 mins from unboxing. I was concerned that it would be difficult based on other reviews that I read but I was wrong. I’m not an engineer or very handy so I was intimidated by the other reviews and delayed trying my hand at putting these legs on for about a year. Definitely regret that now that I know it’s an easy process. The instructions are definitely threadbare, but the pictures and parts are well labeled enough to follow. You do need to know that you’re not going to use all the parts included because this kit contains leg adapters depending on your Masterbuilt model. I have the Masterbuilt MB20071117 Digital Electric Smoker, 30", Black and these legs fit perfectly. Some people complained of the legs not aligning correctly- I didn’t have a problem with this at all. I was able to hand tighten all the bolts and then went back through with a wrench to fully tighten. It’s an effective product and now I can roll my smoker over to my patio. I am still considering getting a dolly to roll it around because the Masterbuilt doesn’t have a place to attach a top handle. When I lean it back to roll it, I’m just using my hand strength to hold onto the smoker. That’s a design flaw in the actual smoker, not this leg adapter kit though. This product does what it’s advertised to do- highly recommend.

Product is sturdy and looks and fits (30 in) good even though it is usable on multiple products. Instructions are terrible. Be careful about L & R front legs; don't get them switched or it will not fit well. Totally assemble legs loose separately then install on the smoker. I have a cold smoker attached to R side and with the legs it no longer had any support hanging from the side 10 in in the air. I delayed this purchase because of this issue until I came up with a plan. I added a short angle bracket at back bottom of smoker (using the old wheel screws and attached to bottom of cold smoker attachment) for stability and to keep box from rotating around smoke hole in smoker. Then I riveted the unused 40 in. cross member channels (came with kit) together and attached them to the bottom of the smoker using sheet metal screws at the edges of the smoker (see the rivet pattern on bottom, there is metal flanges to secure to) This now supports the cold smoker very well and even better than it was. I'm ready to smoke again and have some GREAT smoked meat. I added some photos of the added rear cold smoker bracket and one showing the added support (using 40 in braces) under the cold smoker. I use a Bradley Covermates cover (avail Amazon ~$20) which fits great over smoker with cold smoker addition.

I bought my son a master built electric smoker for Christmas. I am so glad that I bought this to add to it. The material is strong and well-made it raises up the smoker to a good level so you aren’t bending down so much. You’d have to be on your knees at seven points if you didn’t have it. Also I like the space that it looks some airflow through underneath. The only thing is that in assembling it we had some difficulty. There are different size bars so there will be extra that you won’t use. And it’s not real clear on which ones you need for your smoker. We figured it out. The instructions are not the best but they are not the worst. The biggest issue that I had was you really do have to put things in a certain order. I tried so many things I honestly don’t know what I did when I finally got it to share with you, but what I can say is if you’re having trouble getting things to line up just try different things. I had the right bars in the right spot so you would think no matter if you attach them together and then to the smoker or vice versa it should be the same thing but it’s not. But we got them on and are very happy!!! Otherwise love these!!!

I have the Masterbuilt 20070411 30-Inch Top Controller Electric Smoker with Window and RF Controller, and purchased this stand to raise it up a bit. The shipping was quick and the stand came disassembled with a set of really really crappy instructions. The instruction book included in the box contained pictures and a parts list/diagram. It seems Masterbuilt is more interested in printing it in several different languages than it is about telling you how to assemble it. Since the "instruction" book is so small, I went on MasterbuiIt's website and printed out a 8.5 X 11 copy of the diagram so I could at least see it. This stand is universal for 30" and 40" smokers and it worked fine on mine. It is somewhat confusing since they give you an extra set of braces that are for the 40" (or 30") model and it is up to you to decide which is which. I turned my smoker on it's back and removed the original pads and wheels that came with the smoker. The installation was pretty easy once I started, and as others have stated, DO NOT TIGHTEN ANYTHING until all the braces, legs, and rollers are in place since you will need to align the braces with the legs as you assemble it on the smoker. Once everything is on, then align the legs to the edges of the smoker and tighten them down, then tighten down all the cross brace screws. All the hardware was included and since this is for several different models, I had 6 M6 washers left over that were needed for another model that I don't have. Once everything was tightened and aligned it is very sturdy. The wheels are nicer than the ones that originally came with the smoker and made rolling it around pretty easy. It doesn't have any way to level the smoker like the original did. My cover doesn't fit all the way down the legs of the stand, but I'm not too worried about that. All in all I am happy with this purchase and I think it will be a nice addition to my smoker. I only rated it 4 stars since the assembly instructions are printed way too small and don't help too much.

Great price vs. MSRP. Sturdy and raised the smoker to a more comfortable and usable level. A must have for your smoker!! Assembly is easy BUT beware that you will need to re-use some screws from the standard feet of the smoker. They include crossbars for both the 30" and 40" smokers. You will need a magnifying glass to read the small print and illustrations of the skimpy instructions. The stand did fit my MES 230G smoker well and raised it up enough so I don't have to get on a knee to use it. My assembly advice: lay the smoker on its left or right side elevated (I used a garbage can). Also leave all screws loose until the entire stand is assembled then you can tighten them as you align the stand with the bottom of the smoker.

I purchased this universal leg kit after buying my Masterbuilt electric smoker, model #20077915 (ironically, the exact model shown in one of Amazon's sample pictures). I had to remove many of the original smoker's parts in order to attach the legs, but the instructions walk you through the process step by step. I would suggest assembling the leg kit and leaving all the nuts and bolts loose until you attach them to the bottom of the smoker. Once you're sure everything lines up correctly, then tighten all the connections. The leg kits does come with two wheeled legs on the rear for easy moving of the unit. The description states this, but the sample pictures don't really show it very well. Rest assured you can still roll your smoker around after installing the leg kit. It's apparent by all the additional holes on the kit that it will fit numerous Masterbuilt smokers. Again, the instructions will walk you through which bolts to use for your particular model of smoker. Also, since this is a universal kit, you will have extra parts left over which are not used. Masterbuilt provides side braces of different lengths to accommodate various sizes of smokers. You will not use all the parts provided. As a side note, if you're interested in buying a cover for your new smoker and leg kit, the Masterbuilt smoker cover model #20080413 worked perfectly for my application. Because the leg kit raised my smoker by about 10 inches, this particular cover was ideal. After placing the cover on the smoker, it completely covers the legs too, leaving about half an inch from the ground. However, before buying a cover, make sure you verify all dimensions: width, depth, and overall height. Some covers have the length you need, but the width and depth may not match your model of smoker. Just double check the dimensions before buying. I would certainly recommend this leg kit to anyone wanting to raise their Masterbuilt smoker. It's definitely helped me from stooping over further than necessary to access the food and the interior parts for cleaning purposes.

I received a MasterBuilt smoker (MB20071117 MES 130B) for Christmas. It was very awkward sitting on the ground so I began looking fo a stand. I found this one on Amazon and gave it a shot. There are reviews saying that the stand doesn't fit the smoker I have however it fits very well and does a great job raising it up. Some say that the instructions are too difficult to read, they are not very clear but I didn't even use them to assemble the stand. I honestly don't have one complaint about this stand. It does exactly what it describes and looks great.

Easy to assemble once you figure out the pictograms in the instructions. There are very few written instructions, so it's a bit if trial and error picking which holes to use when bolting to the bottom of the smoker. It fits several models, so there are multiple holes that seem to make sense.after a partial disassembly and reassembly, the legs were installed and I no longer have to carry it in and out of the garage. One note - the smoker sides are very smooth, so it's hard to maneuver it when rolling it. I bought a couple of small handles and screwed them into the sheet metal on the back (see pics) to give a bit more grip. You're only screwing intonthin metal, so they are definitely NOT for lifting but do well for moving around in the wheels.

This is really good and so easy to fit. Raises the smoker just enough off the floor. Wish I had brought one earlier 👍🏻

Very useful having wheels if you need to move your smoker to use it.

Fit our unit perfectly

Great product, easy to install. Gives the added height . Much nicer to smoke now.

Love this easy to fit and makes the electric smoker easier to move with the wheels Now for a few negative comments… It could do with a handle so it’s even easier to move around Why isn’t this part of the electric smoker when you purchase it