Hakuna Pets Super Tough Pet, Cat and Dog Door with 2-Way Locking Panel for Screens, Doors, Walls and Glass up to 2.17" Thick, Small, White

Works great for our cats and pugs. Instructions were clear. Easy to lock if needed to keep out wind , rain, snow. Very convenient for the pets to go out in our fenced in yard whenever thety want.

This was a great little door for the price. We needed one to go into a storm door. Had plexiglass in the bottom and it worked great. Cut and installed. Hard to find one to install into glass.

I needed to install this pet door into a patio screen door, so this was a two day project for me. I started with a 35" square piece of 1/2" plywood, to which I "dry-fitted" the pet door per the enclosed assembly instructions. Once I saw how it was supposed to come together and confirmed that my cut-out was level and square, I removed the pet door and applied two coats of exterior house paint to each side of the plywood. The next day, I removed the screen and aluminum kickplate from the bottom half of my patio screen door and attached the painted plywood to the inside of the patio door frame (using 8 self-piercing roofing screws with neoprene rubber washers). That done, I completed the job by attaching the pet door to the plywood. I'm an extreme DIYer and a perfectionist, so I'm always pleased to find a product that I have to assemble to be well-engineered. This pet door is certainly one of those, and I'm very happy with the purchase. And BTW, the primary reason I chose this door over two others, is the fact that it can be mounted into a "door" having a thickness as small as 1/16" (which I thought was a mistake on the Amazon product page; I had to get verification that it wasn't a typo). The other two pet doors I was considering wouldn't work with a piece of plywood as thin as 1/2". It turns out that many doors on the market will not, so that was a limiting factor for me. I only have one minor complaint, and it concerns the installation instructions. Although they were succinct (to say the least), they were also clear. But, they were missing one important piece of information: the back (outside) half of the pet door frame must be oriented a certain way (because the top two corners are right-angled while the bottom two corners are arched). Think of it as assembling a sandwich with two pieces of white bread, and when you get done, you turn the sandwich over and discover that the bottom slice of bread is upside-down compared to the top piece. This frame WILL screw together like that - with the back upside down - and you won't notice the problem until after you've assembled it. I know that to be true because I did it. After putting the frame together, I went out to check the other side of the door, and was dismayed to find the frame was bulging in several places. I had to take the assembly back apart, re-orient the back half of the frame correctly and screw everything together again. Note to manufacturer: You should either change the placement of some of the screw posts so they won't align unless both pieces of the frame are properly oriented, or (the easier solution) place an indicator on the inside of the rear frame half and annotate your assembly instructions accordingly. At bottom: I really like this frame and I'm happy to recommend it. (We'll see how many summers it'll withstand on the west side of my Florida home.)

This is a great dog door it's easy to install and it looks great. It is priced very reasonable. I had one problem and that was that my dogs didn't like the resistance to push the door open because of the magnets. They would go up and push it with their nose and if they didn't push hard enough it wouldn't open. I was having a hard time trying to train them to go through it. I came up with a simple solution I took the door back out and removed the two magnets that hold it closed. Now both of my dogs go in and out with no problem whatsoever. If the wind is blowing real hard it will open the door slightly but not enough to let cold air in. Problem solved dogs love it I love it I highly recommend it.

Haven't used yet but seems to be a good purchase

My dog loves it. Strong magnet closing. We've had several storms and the door hasn't blown open. Easy to install. Curious to see how well it works in the winter.

I love easy it was to install. I was worried about how big of an opening to cut but then they provide a cutting Mark to show you how big it needs to be . And comes with different size screws and I really really love how they designed the lock feature and I get no wind in whatsoever . The best doggy door I’ve ever had. Good work!

Works as advertised . . . but- If your door is less than 2" width, the tunnel connecting front and back is not adjustable and will be too long. Prepare to take the tin-snips, and hope for the best by cutting it down. Second, the screws connecting front and back are long, and when putting them in, since the front and back must be pushed together, you can't see the alignment of the holes. Took me half an hour to get just half of the screws in. Remaining ones won't connect to back panel, and it's impossible to see inside to get alignment right. Third, the plastic cosmetic caps to go over the screws are a joke. Most won't stay in. I got two of them to stay in, the remaining ones fall out when put into place. Yes, I'm pressing them fully in, so it's not an installation procedure problem. I got it installed, and it works, but if I had to do it over, I would choose a different brand.

No bloquea al 100 Pero funcional

Muy buen producto, mi mascota esta feliz

Buen producto