Baffled Oil Catch Can Kit Universal 2 Port Aluminum Oil Separator Reservoir Tank

I was searching for a catch can for my BRZ/GT86 and didn't want to spend $100+ on a catch can just for the name or a fancy mounting bracket. Since I work in the automotive field, I figured fabricating a mounting bracket is no big deal. So i purchased this catch can and it is exactly 100% identical to the big M-brand version catch can. The pros - This catch can has a good bronze micron filter in it, internal baffling and O-rings on the fittings to help with sealing. Excellent pricing, priced at less than 10% of the M-brand version and other branded catch cans. Much better features than all the other catch cans in this price range. The cons - Requires you to figure out some sort of a mounting solution, but even zip lock cable ties will do. Received the catch can fairly quickly. Came full assembled with the bronze filter and baffling inside the can. Fittings have O-rings on them and the drain plug at the bottom came with teflon tape on them. The lower portion of the catch can had some scratches on it. Send the seller some pics and they send out a replacement lower can the next day. So excellent communication and after-sales service on their part. Following all the reviews on other catch cans here, I was fearful about leaks. So I pressure tested them in a tub of water. Blocked off the outlet and ran 5psi of air through the inlet. There was minimal leaks from the inlet and outlet fittings. Tightened them up and that fixed the issue. It wasn't fully tightened the first time around. Never had any leaks there after. Threw in some steel wool into the can, since I wanted a whole lot more baffling in there. It honestly doesn't need it. Fabricated a mounting bracket, painted it and installed. It's been on the car for a few days now and no leaks whatsoever. I should open it up to see if there's any oil in there, but I've been too lazy to do that. Probably check it next week. Either ways, the catch can works well. No leaks from anywhere. Excellent pricing for a catch can, and has good baffling and filtration. Seller's communication was quick and they even replaced the lower can since the first piece had scratches. So 5 stars for these guys.

First I have to say this seller is amazing. Shipping was extremely fast from china, and they completely backed their product when it arrived, and had a slight manufacturing issue. They where quick to respond, and after describing my issue, and sending a few pictures detailing the issue they had no problem replacing the can. Now on to the catch can. I installed the catch can on a 2012 Hyundai Genesis coupe 2.0t, and for the price it can not be beat. The quality is right up there with its big name brand cousin. First thing you will notice upon unboxing is its look, finish, and weight which seem to have a lot of time and thought put into it for such a simple can. The inlet and outlet are clearly labled and seperated inside the can. The outlet is baffled by a quality brass filter built into the top of the can. The 3/8" npt barbed fiitings have a rubber gasket as well as the top portion of the canister that seperates from the bottom portion for easy draining. With those seals the canister is completely air tight, so no worries of potential boost leaks or oily residue getting all over the engine compartment. The bracket suppiled is easily adapted to any vehicle with a little bit of ingenuity. Over all with customer support backing their product and with the quality at such a reasonable competitive price this can is a no brainer to purchase, and I will be recommending and purchasing for future projects to come. Ps. The Hyundai Genesis coupe uses 7/16" hose for the catch can ports on the passenger side, and one 3/8" hose on the driver side going from the valve cover to the can then 7/16" from the can to the intake manifold port. The barbed fittings supplied with this can work perfect for this application with a good hose clamp.

Easy to install, hose barbs/o-rings have a tight fit into the catch can, o-ring on removable can provides a secure fit as well. Had to use an angle bracket to space the catch can away from the engine, easy to find at Lowe's. Used 3' of 3/8" hose, found at local auto parts store. Great value, will help keep to a minimum any heavy blowby getting recirculated back into the intake system.

Accurate description good service

Seemed to install with ease. I got a valve for easy drainage vs unscrewing the bowl. Time will tell how well it works and if the little mounting bracket will hold up. All the threads were ok and orings were ok.

Nice little catch can, and for the price you can't go wrong. My jlt catch can broke a fitting so I just ordered one of these to have it next day, I have to admit they're pretty much same thing only this one costs less then $30CAD & JLT is over $200CAD

Product was as described. I have purchases it before. 4 stars because it arrived with damage / deflect. The attachment ring is missing paint on one side and one of the screws holes that is in the top of the device is not well done so the bolt cannot go in easily.

Item as described