🔗 Connect with Confidence!
The Legrand OnQ Cat5e Network Interface Module is a high-performance connectivity solution designed for modern homes. With support for up to 8 Cat5e data lines, this module ensures seamless integration of your Ethernet-connected devices, including computers, TVs, and gaming systems. Its user-friendly design features front-mounted punchdown terminals for easy access, while its UL listing guarantees compliance with industry standards. Perfect for any structured wiring enclosure, this module is the ideal choice for tech-savvy homeowners looking to enhance their network capabilities.
Operation Mode | ON-OFF |
Operating Voltage | 110 Volts (DC) |
Contact Type | Rj45 |
Connector Type | Rj 45 |
Brand | On-Q |
Terminal | Physical |
Item dimensions L x W x H | 1.5 x 2.9 x 6.41 inches |
Circuit Type | 8-way switch |
Contact Material | Copper |
International Protection Rating | IP00 |
Number of Positions | 8 |
Control Method | Touch |
Connectivity Protocol | Wi-Fi |
Color | Cat 5e |
Wattage | 5 watts |
Unit Count | 1.0 Count |
Number of Items | 1 |
Global Trade Identification Number | 00804428432685 |
Manufacturer | Legrand On-Q |
UPC | 804428432685 |
Part Number | AC1058 |
Item Weight | 5 ounces |
Product Dimensions | 1.5 x 2.9 x 6.41 inches |
Country of Origin | China |
Item model number | AC1058 |
Size | 8 Port |
Style | Cat5e |
Item Package Quantity | 1 |
Number Of Pieces | 6 |
Included Components | (1) Mounting bracket, (4) Plungers and Grommets, Network interface module |
Batteries Included? | No |
Batteries Required? | No |
M**O
Works great, fits well, tidy up your wiring closet!
These work great in home wiring boxes. Dense enough that 1 or 2 of them gives you more than enough punchdowns for most homes. You can easily modify any custom wall mounting solution by simply drilling 3 holes and using some hot glue to secure, if necessary. Don't forget to swap the green and orange wires if you're trying to do the "B" style plugs!
S**Y
Almost fits
Good quality product. Works very well. Only comment is that it didn't fit my OnQ board exactly. The dimensions were all correct, but the tabs that you insert first were just a tad too thick. They would go in their holes, but they would bind up when you tried to hinge the board down. I had to use some sandpaper and round off those two tabs a little. Not much. Took maybe 10 seconds.
A**D
Worked great
As many have noted the color code uses the European standard so you have to swap the green and orange wires. Otherwise, worked great. I like that the CAT mounts from the front which is way easier than from the back. Doesn't look as clean, but once the box is closed no one knows.
P**
Works well
Just be aware when you terminate on the terminals they are done in an A layout. Be sure to termite the other end in an A
A**S
nice way to connect house ethernet
when i moved into my home, all the ethernet cables were "terminated" in the garage. after taking a closer look, i noticed they were not terminated, but in fact, just sitting in the legrand q box, with connectors on them. so, i have ethernet cables all coming to one spot, but one way to connect them to a switch. i tried adding connectors to the end, but gave up as i realized i am just not that handy. enter this this "switch." it clipped in directly to my legrad q box with no tools and the color code for ethernet wire is listed on which "port". i did have to buy a punch tool, but honestly, learning how to punch (5 min youtube video) was easier and cheaper than hiring someone. Once i was ready, it took me 20 min to strip, punch down, and test each "port". once that was done, i connected each one to a standard switch and boom....all my ethernet ports were active.it is made of plastic, so just careful when handling, but it was study enough to handle the punch down tool.
S**.
Lucked out with the fit and function
I took a total gamble on this module, hoping that if I swapped it with the existing telecom module in the wiring panel that my wired ethernet ports throughout my home would function correctly. Anyways, after removing the old module, using a punch-down tool to terminate the existing wires to this new module, I was really hoping I did everything correctly.Turns out, I did, for the most part. After hooking up a an ethernet switch, I got my most desired ethernet port working in a the wall outlet downstairs. Success! And it was running at 500 Mbs (the speed I'm paying for). Another wall outlet port was also working, but only at 80 Mbs, so I'll have to re-check the wiring on that one, as it may be wired wrong at the wall (A vs. B).In any case, you just have to hope that the existing wiring infrastructure is good wherever you install this module, as there are some many variables that can affect speed / performance. One final note, this module fits perfectly in my existing OnQ panel box and the plastic tabs lined up to the holes, no problem. It was an exact swap of the old (non-functional) telecom module.
B**K
It's 568A, not 568B. Beware.
Most residential wiring is done tia-568B but this device is wired for A. Just be aware.
M**M
Works very well with a leviton wireless box if you are confident in drilling holes yourself
Works wonderfully and the cat6 wires crimp on well. This wasn't made for the leviton wireless box which meant I had to drill an extra hole to accommodate the press button that locks the block in place. I forgot what size drill bit I used, but start small and work your way up slowly bit by bit and it'll snap right in
Trustpilot
1 day ago
2 weeks ago