GRBL Triaxial Control Panel
Output signal:
1: Fan: used for engine shaft cooling
2:Shaft: connect the motor shaft, hold the same with the supply voltage. 5A electricity, if the spindle motor power is high, can connect external relays such as switch.
G code M3 open, M5 closed, with firmware version 0.9 can adjust PWM, achieve the speed of the axis rule and tunable laser.
3: X-axis motor signal output, A4988 max 1.5A electric current.
4: Y-axis motor signal output, A4988 max 1.5A electric current.
5: Z-axis motor signal output,A4988 max 1.5A electric current.

Input signal:
1: X- minimum limit axis X-
2: Y- minimum limit axis Y-
3:Z- minimum limit axis Z-
4: Reset button: press the button, the system will restart and can be used for an urgent shutdown of the machine.

GRBL Offline Controller
1. Press Z + and Z -: the Z axis will move up and down.
2. Press X + and X -: the axis X will move left and right.
3. Press Y + and Y-: the Y axis will move from the front and back.
4. SPIN press: Spindle on (laser on), pin off (laser off).
5. Press Z + for 5 seconds: change the language to English.
6. SMOD press: return.

SD card: SD card reader must write G-code files to the root directory.
Control: Press the Enter key to enter the Manual page.
File:Press the Enter key to enter the file page.
Settings: Press the Enter key to enter the page settings.

Package list:
1 x GRBL Triaxial Control Board
1 x USB cable.
3 x Heat Sink

GRBL 3-Axis Control Panel for DIY CNC 3018 1610 2418

Description

Have a Question? See What Others Asked

Common Questions