HERZO Cordless Rotary Tool,Mini Rotary Tool Kit 32 pcs Accessories 3.7V with Speed 5000-15000rpm, Electric Rotary Grinder for Polishing, Cleaning, Engraving for DIY…

Bit of a turnup this bit of kit, really. For the money at just less than 18 quid, it's a steal. I wanted a small cordless rotary tool to take with me overseas as I work in the oil industry and in my off time like to do something interesting rather than drink and watch TV. So, I make models. And of course sometimes you need a means to make holes or generally cut stuff. As such I searched around and found this which, I took a punt on, figuring that if it was junk I hadn't wasted too much of my hard earned. Well, when it arrived I was pleasantly surprised to find a well made, easy to use and useful small rotary tool which absolutely nailed my modelling needs. The only other thing I did was buy a micro chuck that fits a Dremmel because that allows me to use any sized small drill bit as this, like other rotary tools uses collets which limits the options. Anyway, with the new chuck I had a perfect tool for less than 25 quid. In use it's vibration free, so hats of to the maker. It seems robust enough for my needs but obviously this is not the kind of workshop tool you would have for heavy DIY or industrial use. It's firmly in the hobby craft side of the market. It's charged by any USB source so you won't have any issues there. It lasts easily enough for my modelling needs and quickly charges up over a couple of hours. There is a small kit of bits which is a starter but you will of course need to add to this to make it properly useful. Overall, perfect for my needs.

This really is a very small rotary tool, it is like a very large pen and it is really useful. I have a corded dremmel, which is a bit of a faff to plug in and a bit too big for really fine work. This little tool is cordless so very portable, small and light enough to hold like a large pen and powerful enough for lots of little jobs. I bought it for modelling and customising vintage star wars figures etc. So far out of the box it was charged and in use within minutes. It is very intuitive the collet locking knob is very obvious, works well and the supplied tools are easy to insert and lock in place. Just don't press the locking button instead of the off button, don't ask me how I know that! The power button and settings are simple and easy to use. The supplied tools are fine and I have used several already on a model, the sanding drum is particularly good for such a small piece of kit ( yes I am still surprised how physically small it is). I am really impressed and would strongly recommend.

Excellent piece of kit for a variety of small jobs. I use mine for my model making (mainly railway kits). Especially good as a drill on wood, plastic and soft metal but not hard metals for which it has insufficient power. It only comes with 2 collets so you will need to get more to hold a full range of micro drill bits.

The rotary tool feels comfortable when holding using it. It fits nicely in the hand. The case looks strong though I have not tried any drop tests yet. The lock button has a very positive action when holding it in to change bits and it releases cleanly. On switch on, the tool starts at high speed then goes to the low speed setting. Pressing the button again moves to medium speed and again to high speed. Fourth time is back to off. The low speed was disappointing as there was no torque and the tool would stall under very little pressure. Not sure if this setting is usable. However there was plenty of torque at the high speed and the medium speed is usable. The battery was almost fully charged when it arrived and took little time to reach full charge. The tool does not operate when charging and shows a single red LED. This changes to green when the battery is fully charged. There are 2 collets supplied, one which fits the supplied bits and one smaller which fits standard 2.35 mm shanks. The supplied bits are the usual grind stones burrs and sanding wheels which I have not used yet. I have tested this to drill a 1 mm hole in plastic about 10 mm thick which it did with no problems at all. The drill bit was bought separately. Its portability makes this a very handy tool and I am quite pleased with it.

This a good tool, not spectacular but ok. The drill heads are very delicate so great care is needed when handling them, having said this, I was able to complete the task that I needed this tool for with ease.

An excellent little tool at an affordable price. Comes with a number of attachments all of which are easy to fit and very useful. It has a great battery and is rechargeable. The recharge time is quick and the usb cable to charge it is included. Also included are a set of stencils. The tool has three speed settings which are selected by pressing the button each time. The button will also turn the tool on and off. It's really useful for doing detailed work or getting into those hard to reach place. A very good tool that's durable, well made and easy to use. Really pleased with it.

Having read other reviews I invested in this tool, as other reviewers said the tool takes the Dremel keyless chuck which is great. As I build scale models in wood and plastic I needed a long lasting battery. It has three speeds and great torque as well as quick charging. As for value for money I have yet to find anything to match this, having bought many for engraving and drilling. Having used this for delicate grinding of a casting the tool did not let me down, charge time is sufficient would like quicker but not at the expense of usage time. Fitted the Dremel chuck so quick change sizes not a problem, as a result purchase of another is imminent.

Way smaller than expected, poor battery life, poor power delivery, just about useable. Absolute let down and quite frankly a waste of money. Lesson here, buy cheap buy twice.

Fonctionne níquel sur un peu tout matériaux y compris du verre pour faire des gravures

SUPER.

Me convient pour le modélisme et l'impression 3D mais manque nettement de puissance.

Genial para pequeñas manualidades. Muy contento con la compra. Yo la uso para resina 3D y madera.

Bien reçu et très rapidement