ENERWAVE Z-Wave Plus Switch, Z-Wave Switch, Smart Light Switch with Smart Meter Z-Wave Energy Monitor, Neutral Wire Required, Works with Alexa, Interchangeable Face Cover, ZW15SM-PLUS, White

I bought a pair of these Z-Wave switch with power meter and installed them in February. I use the switch about twice a day - turn it on in the evening (mostly use the button) and turn it off after a few hours (mostly from my smartphone). Last week, after 6 months of use, one of them stopped responding to the button. Now I have to turn on my light through my smartphone or computer, even when I stand next to the switch, really awkward.EDIT: Today is October 19, 2019, 9 month after I placed my order, or 8 month after I installed them, both switch stopped working. They can still be controlled through Z-Wave, but not the mechanical rocker. I will replace them with major brands like GE or Honeywell, they don't have power meters but I hope they would last longer.EDIT 2: After contacted their customer service, I was able to revived the rockers by resetting the breaker (from the house breaker panel).

Let's face it, this switch is only slightly less expensive than some others that are FAR superior (Inovelli comes to mind as a near-perfect Z-Wave for only slightly more).This will include or exclude if you are lucky. I bought three of them and two won't even pair up, the other works intermittently. They get very hot and they are VERY loud. You get a very audible CLICK when you turn this on.This "Enerwave' made by Wenzhou MTLC is absolute Chinese garbage and I wouldn't be surprised if one were to catch the house on fire at this point. I've ripped all of them out and put in far superior Inovelli Z-Wave that not only do what this does for a few dollars more but also have scenes and programmable options as well (and they are quiet and don't get hot).Save yourself the pain, just avoid this garbage.

Pros:- price is competitive compared to other z-wave switches- they work reliably- being able to measure energy and power is niceCons:- Power readings default to sending at 0.1W. This causes an abundance of messages on the z-wave network, and my poor hub is overwhelmed.- The power readings are configurable, but I haven't been able to configure it with the hubs I have: an Aeotec Z-stick + open-zwave using either Home Assistant or the open-zwave control panel, OR the SmartThings Hub.- I haven't figured out a reliable way to add/remove the switch from the z-wave hub. It is very finicky compared to other ones (eg, Homeseer). I had to do this several times to try different hubs to address the previous points, and I wasted hours in the process.- The feel and look of the switch feels cheaper than alternative z-wave switches (eg, Homeseer).

These z wave switches work for a while (purchased about 48) and randomly they stop responding to pressing on and off. I have two that get rather warm. I would not buy them again. Z wave version is old so compatibility with newer controllers are missing features.Updated: contacted Enerlite and their customer support us horrible, offered to rma 4 switches. Or if 48+ that I've bought since 2017. Sure some may be or if warranty... But wait there's a 3 year warranty! Anyways don't ever buy these Chinese made POS. Quality is poor and service is worse.

I ordered these switches a couple years ago when they were on sale and I was replacing a bunch of switches and outlets in my house, but only got around to installing one of them now. After installing the switch, I found that the connected light would work properly when the switch was 'on', but when the switch was in the 'off' mode, the light would flash/flicker rather than shutting off fully. I was it able to get the light to shut off fully by turning on the fan (overhead fan/light combo) and thereby applying an additional load to the switch. I measured between the 'load' terminal on the switch and 'ground' and found that the switch was leaking 1V when the fan was switched on and about 4-5V when only the light was switched on (using the pull string switches). I'm long past the return window so I guess I'm SOL, but hopefully this saves someone else a headache.

Installed in a 12 device z-wave network using an alarm system controller. The "tap 3 times" to program/connect was a bit challenging and had to be executed several times to get it to work (in spite of being less than 6 feet from the controller). Once connected - they control and dim lights using the controller very well. The manual control is oddly problematic and takes longer to respond than form the controller. Since I use the controller - they work fine. Since my wife uses them manually - she is not impressed and is in fact dissatisfied.

Easy install (just like a std switch, but add a neutral). Shows power consumption in real time via my Z-wave hub (Ezlo plus). Does not easily slide between say 10% and 100% in my hub, this could be the hub. at 100% brightness the LEDs have installed flicker, you must drop to 95% or less. When used as a manual switch on the wall it is a bit laggy. I have only had it a week, its OK, but not quite what I was hoping for as a dimmer.

These switches are absolutely horrible!! The first week the ability to manually switch on or off the switches were not working. Contacting the seller I was told to send them back in but I paid to put them in now I’ll have to pay to take them both off and pay to ship them back since they both stopped working and then pay again to have the replacements installed! Just not sure it’s worth it! Might just use my hub to control them and call it a loss, maybe next time I’ll buy better switches since upon inspection when I got them I taught they looked flimsy especially when I changed the paddle color and underneath was just a thin wire like device. Activating the manual paddle function