GuliKit TMR Joysticks Replacement for PS4 DualShock 4 Controller

Don't forget to calibrate

Great quality and a nice upgrade from the stick drift I had going on. Installed these as a complete beginner so I would say easy enough to install. Great value as i didn't need to buy a new controller.

these work really well, follow the ifixit guide with the calibration software link. worked perfectly for me. these sticks feel really nice and smooth, the included thumbsticks are good quality and the extra rubber thumbstick caps feel nice too. Desoldering the old stick is a little tricky without the proper tools as the board wicks away a lot of heat so you're going to want to get the stick area evenly heated. A hot air station would be ideal so you can take the whole stick out at once or you can use low melt solder but if you only have a soldering iron and normal leaded solder like me (don't use lead free as high melting point) then heating each of the joints around the stick a few times should get it sufficiently hot to be workable. I unclipped the pots from the housings and wiggled them until the legs snapped then cut the mounting points for the old stick and l3/R3 buttons, it's a lot easier to get the legs out of the board individually with a solder pump than trying to get the whole stick out with a soldering iron

These are amazing so far. I have tried other ones that come in a pack of 10 for 10 pounds but they would not calibrate properly. Here you get only 2 but they work as they should, was able to calibrate the analogs on ps4 controller to 3% precision. These are very good, I just hope they will last. Will update review if anything changes

Unfortunately didn’t work

No sirve , que queda con dritf

Good fit and worked well

Por desgracia a mi el mando me quedo el drift de los joystick peor que estaban los originales, una pena porque se veía de buena calidad.

Ottimo, ha fatto nascere a nuova vita il vecchio controller.

Joystick commandé en ps4 et ps5 et des soucis avec les 2 à éviter