12-Pack RJ45 Connectors Tool Free Cat 8, Cat8 Field Termination Plug Shielded RJ45 Modular Plugs for 2000MHz 2GHz 40G Double Shielded Solid LAN Cable 22AWG-24AWG

These work great, no need to use a punch down tool, or a tool to squeeze together. Easy to push together with some strong hands. Be careful with copper strip to cover wire shielding. I think I've installed about 30 of these and have not yet had one fail to work.

Excellent fit and high quality manufacturing. Very easy to install for every level of experience.

Horrible, not worth buying. I spend hours. Trying to get this to work with no luck.

Worked great, It took some getting use to but once I got the hang of terminating its was smooth sailing.

Very nice connectors. Easy to use. However a set of plyers is needed to properly seat the CAT7A conductors before the shell can be seated down.

Cumplir con los envíos a tiempo

ITEM AS SHOWN AND PROMISED, THANK YOU GREAT SELLER

I was initially irritated at having to buy a pack of 6 of these when I only needed 1... but I'm glad it was a bulk purchase, because 5 of the 6 didn't work at all, and I needed a Cat-8 capable end cap / connector and wanted the work done *today*. I bought these, based on a recommendation from an internet "influencer", along with a separate crimp/strip/cut tool that came with a network cable tester, after I had to chop off the existing connector on a "pre-fab" Cat-8 cable in order to fit the cable through a tight hole (running hardwired internet from one floor to another). I felt confident I could just replace the connector myself since I'm fairly technically adept (but not mechanically, hence the barely-big-enough-hole-in-a-difficult-to-reach-spot in the wall cavity where I didn't want to create a gaping hole in the wall, ceiling, or floor to make enough space to fit the drill in and make the cable hole bigger). Anyway, I digress... Stripping the outer sleeve, routing the individual wires, using the copper tape, closing the latch, etc was no problem, so high marks for ease of use and the reason this isn't a 1-star review. HOWEVER... on the very first plug I tried, the network tester said ALL but 2 of 8 connector pins were "dead". After redoing the whole end of the cable but using the same connector, the exact same 2 pins failed the network test. That seemed really odd to me, so I tried a different connector from the pack, and this time 3 pins "failed" but they were different from the 2 pins in the first two attempts with the first connector. I tried a 3rd connector from the batch, and that one had an issue with 2 of the other pins but neither the 3 that previously were "bad" nor the same as the original 2 "failed" pins. At this point it seemed likely my wiring job was fine and I was just dealing with faulty connectors, so I basically went through every single connector, and every single one except (thankfully) the 6th and final one consistently failed the network tester, but each of the first 5 connectors had issues / problems with different wire pin combinations from the exact same cable. I'm happy the 6th one actually worked and passed the network test immediately, but $25 of the $30 for the pack of 6 was basically spent on garbage. Not sure if I got a bad batch, or these are just poor quality connectors, or it really was a "me" problem and I did something wrong with the wires and the 6th connector was just more forgiving of user error, but for 5 of 6 connectors seemingly to be "dead on arrival" calls the product's quality into question. All that said, once I got a working connector hooked up and working, it works GREAT! Finally have full speed internet upstairs instead of relying on a spotty Wifi signal. If I had to do this all over again, I'd probably try a different brand / seller.

Used to wire my house to access point from my main router. Reliable, high quality and easy to install.

Es altamente sencillo ponchar. Hay que buscar bien las instrucciones en internet, ya que el proveedor no las pone claramente. Pero cuando las encuentren será muy sencillo acomodar los cables de acuerdo al tipo de conexión que deceen.

No Instructions or Diagram. I'll return if not able to figure out. Extremely confusing.

NO SIRVEN. Igual que la demás gente pase horas intentando hacerlo funcionar. Intente todas las configuraciones porque pense que yo me habia equivocado en el orden de los cables, hasta que cambie los conectores por unos regulares y entonces ya paso la prueba de conectividad. Las navajas no penetran bien el cable y no hay conexion. Es MUY confusa su nomenclatura, ya que viene dos veces el verde y 2 veces el naranja. NO COMPREN.

I bought connectors, the cost is high. I bought a cat 8 cable, I crimped it, connected it to the testers, only 2 lines work, ground and channel 2. I crimped it 8 times and still didn't get a working cable. It looks good, but it won't work. I can't recommend it.