eXtremeRate Dawn Type-C Version Remap Kit for PS4 Slim Pro Controller JDM-040/050/055 with 6 Customizable Mapping Profiles, Textured Black Redesigned Back Shell and 4 Back Buttons - Without Controller

Works perfect ,it's easy to swap the bindings and the USB c port works great with my ps4

Todo ok

The kit itself does work, it works fantastically for what it's designed to do. But when I have the remappable buttons connected using the funky intercept ribbon, I have issues with one or both of my triggers registering anything from just barely above 0 to almost a full press, even though I'm not touching them. Maybe my cable's defective, but it made the controller unusable for me. The quality of the shell it comes as a part of, and the USB-C connector, are fantastic, and I have left the shell installed with the button kit disconnected due to the convenience of the USB-C plug and the decent, though imperfect, fit of the shell. I have replaced the front shell with a color matched ExtremeRate shell, and while separately they both fit well on an otherwise stock controller, they don't work as well when combined, I'm not sure which half has the better or worse fitment, but the seams don't fit together very well and the edge next to the triggers looks like it wants to snap back apart as soon as the screw is undone. If it weren't for that my controller would, and ignoring that still does look, absolutely fantastic, with the all matte white, and this texture in the DS4's shape is super comfy in the hand. Just disappointing that my programmable buttons are a useless showpiece since the connector setup interferes with the triggers.

Incredible value considering how much a pro controller is! It took me about 30-60 minutes to install. The buttons are a distinct click when pressed. I will say however, the part of the button your finger touches, is a little wobbly because of the types of buttons they used. But looking back on this kit being fairly cheap (compared to Scuff), I had no issues.

Flawless works just as intended. Thanks again Extremerate

Compré 2 de estos equipos. Pero en uno el Flex que conecta con la placa del mando con la placa de asignación de botones a los que se dobla hace que mi mando se vuelva loco.

Difficult to install unless you solder it, as one ribbon is constantly hopping out. Once installed it works great though.

Fun project but i had issues with the ribbon cable not seating properly and causing connection issues, seems like it would be better to glue the cables together and maybe the board rather than have 2 flex cables making contact to well 1 contact point which means 1 cable will slip on the other causing said issue. Also the button placement isnt that good but i cant see any way to make it better without getting rid of the batter altogether and making it a dedicated wired controller which i think id rather have anyway since i dont own a ps4 and just like their controllers.

難易度で言うとそこまででもないです。初めてこういったことをする方にもおすすめだと感じました。

旧型からプロファイルが複数登録できるようになったのと背面ボタンのキャップの予備が同梱されているのは良かった Youtubeの「eXtremeRate PS4 Controller NEW DAWN Remap Kit Type-C Version Installation Guide」という動画を見れば導入は大体わかりますが所々問題があるので画像を上げておきます スティックの修理で何度も分解すると抜き差しする形式のフラットケーブルの接点のパターンが剥げる可能性が高いので短いケーブルと挟み込む形式の延長コネクタを改造して取り付けました ●リマッピングのやりかた ・プロファイル切り替え(全部で６、消灯は割り当てなし) 設定ボタンをダブルクリックでプロファイル変更 青→緑→水→橙→紫→白→(消) ・リマッピング リマッピングしたいプロファイルを選択 設定ボタンを５秒間押す→LEDが点滅してリマッピングモードに 背面ボタンのどれかと登録したいボタンを一緒に押し続けるとLEDが赤色で３回点滅し登録されます (登録してあるボタンに同じボタンを登録すると背面ボタンが未登録状態になります) 設定ボタンを５秒間押す→リマッピングモード終了 ・現在選んでいるプロファイルの初期化(他のプロファイルは初期化されません) 初期化したいプロファイルを選択 L1、R1、↑、←、△、○、を５秒間同時押しするとLEDが赤色で３回点滅して 選択中のプロファイルの背面ボタン全てが未登録状態になります

Rien à redire sur la découpe de la coque, mais concernant l'installation plusieurs points d'amélioration sont possibles : pré-étamer les câbles pour le mappage des clics de sticks, mettre un bouton de configuration mieux ajusté (le mien est trop court et je ne peux pas l'utiliser sans curre dent), les nappes ont une longueur très juste, et ont tendance à TRÈS mal se placer lors de la fermeture de la coque, des câbles LED sont préinstallés (je ne les utilise pas) et posent aussi énormément problème pour la fermeture, il faut couper les pattes en trop soi-même lors de l'installation. Enfin deux soucis ergonomiques selon moi, les touches K2 et K4 rentrent dans les doigts au niveau de la pointe inférieure, c'est assez inconfortable, et superposer les boutons pour les utiliser avec des doigts différents serait certainement plus pertinent.

Ottimo si adatta bene al dualshock 4

One of the best products on the market. However, my big fingers suck at putting small screws in holes highly recommend a better screwdriver