Supershieldz (2 Pack) Designed for Motorola Edge (2024) Screen Protector, High Definition Clear Shield (TPU)

I recently got an Edge 2024, and immediately went looking for a screen protector. I've typically used the tempered glass film screen protectors, so I tried a couple of different versions of the "hard" screen protectors. My experience was these would not stay in place once I put the phone in a case. The edge of the case would cause lift on the screen protector due to the nature of the rolled edge of the display. I've used Supershieldz screen protectors in the past with good results, so I decided to give this film version a chance. My logic was the film would be better than nothing? The alignment tool that fits into the USB port is so obvious I don't understand why it's not a standard approach. Installation and proper alignment is bone simple. Once there, you follow a series of steps to remove four different films. Once it was in place, I was concerned about the number of "micro bubbles" that were still apparent. The instructions clearly say "Remaining micro bubbles and line should be disappear within 2-3 days." (-5, grammar) I was reluctant to leave it on with all the bubbles, but decided to be patient. Lo and behold, the "micro bubbles" were gone in about 4 hours, perhaps as the screen was used and/or heated up. This seems to be a decent solution for an otherwise awkward screen design. No, I do NOT think it will have the impact resistance of a glass screen protector, but again, it seems better than nothing when using a case.

Amazing phone screen for the edge 2024. You will need a tpu protector rather than tempered glass for this curved screen. After a couple days of reading reviews, I bought this screen protector for my phone. First and foremost, it's a solid little bundle that has everything you need to clean your screen and install the protector successfully. Second, and very important. Be patient. You may need to overlay a few times after taking off the first and second layers to get it right. Keep trying until you get it where it needs to be. Third, and perhaps most important. Follow the directions to a t. They are easy to understand, albeit in small print, but follow the instructions and you will have no problem whatsoever. Don't fret if you see text on your screen protector as you're applying it, after you take off the last layer it goes away. Anyway, I highly recommend getting this one. And it comes with two if you *really* mess up and try again. But I was able to get it perfect on the first go. There are a couple micro bubbles but they should go away after a couple days, per the instructions. Great value, fits perfect, reads my fingerprint easily. Feels fine to the touch.

These are the best screen protectors I used so far.. it's super easy to install. With the installation kit putting this screen protector on is a breeze. One issue is mine went on a bit crooked.. my mistake. But I can live with it😂 just make sure everything is lined up and your good to go. Zero bubbles no lifting from the edges. I ordered more just in case 💯

This screen protector is honestly very frustrating to use. The installation itself is straightforward, but the design makes it nearly impossible to get a clean, dust-free finish no matter how careful you are. I tried multiple times in a clean environment, but dust still ends up getting trapped underneath because of how the protector sits and aligns. Once that happens, there’s no easy fix, so you’re basically stuck with bubbles or specks that affect visibility. On top of that, the material itself feels pretty cheap—more like a thin sticker than a proper screen protector. It scratches very easily, and even normal use like swiping or light contact from nails can leave visible marks. Overall, it just doesn’t do a good job of protecting the screen or maintaining clarity.

Super easy bubble free installation if you follow the instructions. Feels and looks are great. After years of using glass screen protectors I do notice that this can "scratch" which you don't notice when using the phone under most conditions. I would highly recommend this screen protector if you aren't using a case or a full wrap around case. Unfortunately my case pushes up all four corners. This doesn't hinder performance but it's a slight bummer and will shorten the lifespan of the protector.

Reliable screen protectors that consistently do what they’re supposed to do. This is my third phone using this brand and second pack for this device, and the experience has been consistent across all of them. Installation is straightforward, and the included alignment system makes it much easier than most TPU kits. The best feature is a small plastic alignment piece that fits into the charging/battery port to help position the protector perfectly — this makes lining it up almost foolproof. Included accessories add strong value for money: 2 screen protectors, 2 microfiber cloths, dust absorber stickers, guide stickers, 2 alcohol prep pads, and a microfiber spudger tool. Once applied, they adhere well with no edge lifting. Any minor bubbles or haze settle out within a couple of days and the finish becomes clear. Touch response remains unaffected, and they hold up well during normal daily use. Overall, this is a well-designed kit with a genuinely helpful alignment system and strong accessory bundle, making installation easy and consistent.

Works great! Instructions were clear on how to install it.

Works fine. Seems durable, but then I am not hard on my phones. Fits in conjunction with a case: I mention this because the phone is a Motorola Edge and the screen protector fits the profile which means that there is a much higher chance of it not fitting with a case, seeing as how cases usually wrap around the front of the phone, at least minimally, so that it can stay in place. The two pieces DO abut directly, but I haven't had any issues with poor conductance. The screen responds evenly from edge to edge. The only things that I would add to the installation instructions are A) have a pure, bright white background enabled so that you can see the slightest speck of dust or dirt, because you are about to lay a tacky surfaces screen protector over it any little bit of debris that you miss will sit there and taunt you forever! B) Clean the screen thoroughly for finger prints for the same reason. C) Have a lint free cloth to make sure that you can get all of the specks off of the screen first. Anything that you miss will adhere itself to the tacky surface of the screen protector forever.

These are plastic screen protectors but they actually work really well on the edge 2024. Very easy application using the guide tool. The handful pf bubbles were in fact gone by the next day. Perfect fit and cuts for edge 2024. The surface is nicely slippery and feels the same as glass. So far im really impressed as i swear by glass protection but heard so many bad stories about applying glass to curved screens. These ones work 👍

The first one that really fit Stay on even curved side

All is good

One of the worst screen protectors I've ever seen it is made of floppy rubbery material I don't know how this can provide any kind of protection to a screen if you drop it and it lands on an uneven surface it will certainly crack the screen I only use tempered glass for that reason. I cannot believe such trash screen protectors are still being manufactured they are totally useless and extremely hard to install without creating any air bubbles.

I was so relieved after trying a different brand that had not worked. These really worked and came with everything I needed. It takes a bit of time to go through the adhesion-process but worth the effort.