USB-C Enclosure for M.2 2230 PCIe NVMe SSDs, 10Gbps Transfer Speed, UASP and Trim Support, Compatible with Windows, macOS, Linux (EC-NE30)

This Sabrent USB C NVMe enclosure is excellent. Installation was truly tool free and only took a couple of minutes. The drive fit securely and the enclosure closed firmly without any rattling. Transfer speeds are very fast when paired with a compatible NVMe drive and USB C port. It is great for cloning drives, backing up data, or using an NVMe as portable storage. The aluminum housing feels solid and helps with heat dissipation during longer transfers. Overall, this is a reliable and well designed enclosure that performs exactly as advertised. I would definitely recommend it.

Paird with a 2 TB Micron Crucial P310 PCe Gen4 NVMe M2 SSD from Best Buy. Zero problems. Can connect directly to my Pixel 10 Pro and copy over pictures, video using the "Files" app. 13GB takes about 2 minutes to transfer. Well built enclosure.

Great quality product. Solid build and works well. Very easy install SSD. Directions say to install thermal pad on inside cover, but it came from factory already installed. Also came with an additional thermal pad and screws. Very satisfied with purchase.

I use it to expand the storage of my Xbox Ally without having to take it apart. Had a 2TB nvme drive laying around before prices skyrocketed. Works great so far, no complaints. Thermal pads on both sides keep temps under control. Overall great value for the money.

Purchased for a 1tb Samsung 980 m.2 NVMe drive which was at 100% Drive Health Remaining with 0 bad sectors, errors, or warnings in Samsung Magician or the previous PC it was used in as a storage drive. After putting the drive in this enclosure & connecting to my PC, the drive was detected almost instantly but when simply exploring the folders on the drive it would occasionally hang for 5-20 seconds. There were a lot of files on the drive and I've never used an m.2 NVMe enclosure before so wasn't sure if it was normal then had to step away for a few mins only to come back to the drive no longer showing up in Windows File Explorer, Device Manager or Disk Management... In the whopping 10 minutes it was connected to my PC (tried front of case port as well as motherboard port, both type-c USB 3.2 Gen 2) Windows Event Viewer logged 688 Disconnect/Reconnect/Device Reset/Delayed Write Failed/Data Lost/Corruption/Paging Errors etc before the drive vanished. I restarted PC and tried different ports but could no longer get the drive to show up anywhere after using it in this enclosure for only 10 minutes. Drive won't show up when connected to my other PC or Laptops either. I removed my drive from the enclosure, opened up my PC and placed the drive back in the m.2 slot it was functioning in perfectly prior to trying the enclosure and now the PC can't even detect the drive when slotted directly into the motherboard where it was just working.. Doesn't even show up in Disk Management to try and format/reinitialize etc. I've done data recovery for friends and family who've had drives fail with important documents/family photos for years and the professional software I have a paid license for (Disk Genius) can't even see or detect the drive either so I'm pretty sure this enclosure just completely destroyed my drive so thats great. Lesson learned I guess, don't stick a drive worth $100-200 in a $20 enclosure and expect your drive or data to survive. Thanks a TON Sabrent, would be great if you wanted to reach out and offer some compensation beyond the $21 refund that won't cover a replacement drive.

Note, despite the Sabrent 4 bay USB-C dock claiming Universal Compatibility, these will NOT fit and allow for the cover to be placed on it. These are FINE, the dock is not.

Drive goes in easy and seems secure. For the price the transfer speeds are good. Stays connected and functions as it should. It does get a little hot after a while and the extra thermal pad it comes with is a little difficult to get the adhesive off. But honestly for the price it does what it should. Cable is a little short but it’s clearly shown in the picture and description

When I was setting up my Steamdeck I knew at some point that I would be needing to put a larger SSD inside of it. With the deck it's rather hard to copy things over sometimes. This SSD enclosure gets it done. You can slip your ssd inside and just plug it directly into the top and use etcher to clone your drive. It seriously makes the process simple, the only real issue is cooling. It has no fan or anything so after a while the SSD will start to throttle to cope with it. The thermal pad inside is not enough to help keep it in check. Overall I recommend it. It's extremely fast. Just know what you're getting into.

I've always liked Sabrent stuff, neat, simple and works, what more do you want.

no le doy 5 estrellas por el sistema que tiene de sujecion del m2 podria ser mejor. El dispositivo cumple y es sumamente elegante

ho trovato il case molto utile, dalle foto non sembrava ma tutto il corpo è in alluminio, all'interno la tenuta dell'ssd è affidato ad un piccolo fermo in plastica che ruota e tiene bloccato in posizione, avrei preferito una vite visto che in ogni caso c'è bisogno del cacciavite per aprire lo sportellino che copre il vano ssd, in ogni caso ottimo prodotto ha superato le mie aspettative, c'è anche un piccolo pezzettino di pad termico per aiutare a dissipare il calore generato dall'ssd stesso trasferendolo a tutto il corpo in alluminio.

Très pratique, faible encombrement. Permet des sauvegardes rapides, dès qu'une m2 est installée.

Spitze