CleanCut Step Bathtub Accessibility Kit - Convert Existing Tub to Step-in Shower (White, Size Large)

great I expensive alternative to tub removal. if you want a easy walk thru into a tub, this is much easier than tub removal and installing a shower pan

This walk-in shower kit is amazing. The materials are quality and the instructions were very comprehensive. The installation was easy. The cost savings were very significant. We highly recommend this product.

Wanted to have easy access to my bath tub. This definitely filled the bill. My son installed it with little problems. Love it. We did not want to spent $10,000 plus remodel.

If I had it to do all over again I would have sent this back and ordered the rite size directly from the company its THAT big a deal!!! I'm REALLY UPSET WITH AMAZON for not carrying the full range of product from this company so MY experience will not be most peoples and that's a good thing. I bought this for a bed ridden family member who cant lift her feet more than two inches off the ground wen she is standing. I honestly never even knew these tub inserts existed wen I found them on amazon. Before I found them I was trying to strait up afford a full on walk in tub I still plan on getting a walk in tub but hopefully this helps out for now. In all fairness to clean-cut co the websites step by step installation videos are grate! easy to understand and fallow. However I chucked the whole standard process in order to sink the insert as low as possible. I had to cut the width of the entire insert and dropped it in level with the tub walls (I do not know how this is going to impact performance longevity or the actual safety of the product and I do not recommend doing that for most people) especially if a warranty is involved. But the recipient cant lift her legs and the insert even sunk as low as I could go the step is still really to high up. As to clean cut themselves this is some pretty impressive stuff everything is solid even though (amazon docent carry any of it) They do have a range of products to suit specific needs hint hint shove shove AMAZON!!! This is peoples health and safety not computer parts and video games IT MATTERS!!!!. Also I do feel clean-cut should include a small disposable torch and gloves at the very least a few pairs of rubber gloves are not to much to ask this is a good product but if your like me and you need the ultra low cut just go to the clean cut website I wish I had this did not haft to be the process it turned into

Easy to install. Great directions. Watch the video. Well built. Works perfect. Thanks

Great product and pretty easy installation. Bought this for my 97 year old mother’s tub. We watched the video and read the diy instructions a few times and were prepared. It was unpacked and installed in 2.5 hours…much faster than we expected. It was a steel tub, so pretty messy but clean up went well. Mom is thrilled!

I got this for my wife.I have a fully enclosed fiberglass Koehler tub Unit. I was hesitant of cutting up my tub unit myself, but the cost for a contractor to do it was too costly for mesas this was a lot less expensive than installing a new shower unit. I had to buy one tool (hand grinder) to do this this job, $99.00 which I needed. They give you all the stuff to eliminate mistakes. Watch the video several times. The only thing I messed up on was the plastic nozzle they give you, I did not install directly into caulking gun like you would the caulking tube, consequently it was most difficult applying the sealer. I recommend this if you are fairly handy with tools and can follow directions. My job turned out well, My wife loves it and the $1500.00 I saved was a great reward. Took me about 4-5 hrs. including clean up to do the job; 3 months to decide if I want to tackle this., finally I said I can do this ... Cleancut $350, Grinder $99.00,My time $000.

Very easy install. Took husband 4 hours total from start to clean up. Good item. Love Love Love this item. Saved us alot of money as a redo of our shower would have cost $20K. Work slow and steady and view YouTube videos to prepare for the installation.

This is the most amazing product! I am a 60+ woman with back problems and I was still able to install this insert with consulting assistance from my husband. It took almost 8 hours to install with frequent rest stops, but the time was well spent. Don’t rush installing this, it is worth every minute. As I said, I have an ongoing back condition, so getting out of the tub after a shower was risking a fall anytime. Not any more! At this time a tub replacement was not even a consideration, hard to find and too expensive so the insert was an excellent plan. Pay attention to the tools you will need and you shouldn’t have any problems, planning is the key.

Great product made very sturdy.

installation was straight forward

The purpose of cutting out the tub is to help ensure no slip and fall accidents for my Mother when she gets in and out of what previously was a tub and is now a shower... a low step with multiple hand grab bars and a shower seat all add to the mix as does a NON SLIP shower matt... and with all this she should have a safe shower to use in her home... Installation involves skilled use of a jig saw (I used it on an angle)... and it involves the creation of a foundation from the floor level between the cut tub walls to the bottom of the insert.. I was VERY careful with both the insert preparation and the foundation and both came out perfectly but I would suggest that the level of difficulty is sufficient that most home owners are going to seek experienced installers unless they are both handy and proficient with tools and variations.. for instance the foundation had to be built around a structural cross member in the tub... I did this.. cutting a notch in a piece of wood to transit the structure...

We bought and installed this so that our dogs, 1 of whom is getting older and 1 is disabled with severe double hip dysplasia, could get into and out of the bath with much less pain and struggle. Works perfectly for that. We aren't DIYers and install was a bit of a cluster#$)@ but nothing got ruined so it's a win. The instructions have steps that left us wonder WTH we were supposed to do and "winged it". Rather chaotic but made it work. If you're handy, you'll be fine. One thing to note is the 2 tubes of glue/caulking - it's a great, fantastic glue. It's absolutely horrendous for caulking. We made such a mess, there was no way to do it neatly. Ended up having to clean it all off with paint thinner and reapply, and it still looks rough and not ideal. If we'd known, we would have gotten real caulking and used that. It's so thick it doesn't spread at all, just kind of mushes into place. Since this tub repair is only to tide of over for a few years until we completely redo the bathroom to be walk in, I'm not overly stressed about it. But most people will care, so be mindful that the glue/caulking sucks as caulking.