NEIKO 02440A 3/8-Inch-Drive Impact Socket Set, SAE Sizes 5/16" to 3/4" and Metric Sizes 8 mm to 19 mm, Includes Extension Bars and U-Joint, 44 Pieces

Ive use these alot and they are holding up great. Ive used them in my professional career as a field service tech and at home for small repairs.

As someone who takes on mechanical projects more as a hobby than a profession, I recently found myself in need of an impact socket set for use with my Milwaukee M12 driver. High-end, brand-name sets seemed overkill for my level of use, leading me to the NEIKO 3/8-Inch-Drive Impact Socket Set. This set appeared to offer the balance of quality and affordability I was looking for. Upon arrival, the first thing I noticed was the uneven coating of oil on the sockets, intended to prevent rust. While initially a bit concerning, it turned out to be a minor issue that didn’t affect the set's functionality. The sockets themselves are robust and have so far handled the tasks I've thrown at them with ease. From casual automotive work to various home repairs, this set has proven to be quite capable. The practicality of this NEIKO set is its standout feature. It's straightforward and unpretentious, yet it includes some commendable qualities. The durability, thus far, has been satisfactory. One month into using them, and they've shown no signs of wear or failure, which speaks to their build quality for the price point. While not adorned with the prestige of more recognizable brands, this socket set fulfills my requirements perfectly. It's a practical choice for anyone like me—a simple mechanic who enjoys dabbling in projects without needing professional-grade tools. I plan to monitor the longevity of these sockets and will provide updates on their performance. As of now, they are a valuable addition to my toolkit, effectively supporting both my work and home repair needs.

Nice set of 3/8 impact sockets. Work well for my DIY automotive repair needs and the plastic carrying case is pretty durable and well made unlike most others.

I was looking for some 3/8" impact sockets, as many times the 1/2" impact wrench is overkill for what I need. I had some previous Neiko products, and was satisfied with the quality so decided to go for them again. They certainly work fine, but I can see some wear vs unused sockets on the part that goes on the wrench. I assume this could be a tolerance issue with either the tool or socket, but I have several brands of 3/8" impact wrenches, and the sockets have had the issue with all of them. It could be that my wrenches have hog rings and these have the pin detent setup, but they certainly wobble more than I would expect either way. Time will see if they last, but overall, happy with the case and ease of seeing the size.

Sizes are stamped/rolled and laser etched. Nice touch. Would have been nice if the etching lined up with the detent pin holes but that's picking nits. Phosphate coated not iron oxide which is nice. Box says "Made in Taiwan". These are CrV as opposed to CroMo. CrV is more brittle and so I'm told the walls need to be thicker to compensate for impact shock, but they will last longer than CroMo, as CroMo will begin to deform with use. Supposedly CrV will shatter, CroMo will crack instead. I've never seen a socket shatter under correct application so, always wear eye protection when wrenching, and take that for what you will. Thicker walls might create clearance issues around certain fasteners. On that odd bolt or two it's likely that clearances are an issue from every angle so I'll be using a extended box wrench anyways. I was willing to give up thinner socket walls for all the other features this set offers. The plastic case the sockets come in gets 5 stars. It has an actual hinge as opposed to more expensive brands which use a flimsy piece of plastic left connecting the two halves from the blow mold process. The handle grip is part of the case, and not separately attached giving it a very solid feel. Additionally it has hinged clasps rather than clips which we all know wear out quite fast from use. All the sockets lay down in the bottom tray and appear to stay quite secure when closed when the retaining foam sheet is left in place. I wanted a socket set that did not use the top lid to hold sockets as repeated removal/replacement of those sockets will quickly wear out the plastic that retains them. The case for this socket set is a strong selling point. It's important to me that I be able to stow this kit reliably in a vehicle or mobile-repair situation and not have the rear hinge let go and dump it's contents all over my trunk. This kit comes with a VERY useful 3/8 to 1/2 impact adapter which I'm sure I'll use on the 3/4"-17mm+ sockets switching between my two guns. Extensions are also of useful sizes and appear quality with minimal wobble/slide on the tool-end square drive and little to no off-axis rotation at the socket-end square drive (meaning they were allowed to cool slowly and properly). This limits an extension doing the ol' whirly-gig and flinging your sockets across the concrete when you tap the trigger on the gun a bit too soon before you're 100% on a fastener. The u-joint socket adapter is a bit on the bulky side, but that should come as no surprise as it's CrV impact rated. IMO it should have been deleted and made room for a 6" or 8" wobble extension OR a small selection of 8-12mm 12-point sockets (for drivelines), and all the extensions should have been wobble. That may be just me though. I wish Neiko or their parent company would consider branching into chrome, because it's obvious whoever puts these sets together knows what they are doing. In any case, I'm very pleased with this purchase and would recommend. I buy a lot on amazon and rarely review.

At the time of purchase this set was $59 comes with both Metric and Standard sets of 6 point sockets. Along with Deep and short versions of each size. I was able to use my Milwaukee 3/8s stubby and brake loose all the bolts on my 1998 Buick Lesabre without any issue. I live in North Dakota and the rust on the suspension is terrible but I took my impact to it on the lower control arms, tie rods and the sockets did just fine. If you are just doing a weekend project or regular maintenance this set is perfect for the price. If you are wanting to start a small side gig and are tight on money this is a good "starter set" don't expect this to out perform Snap on but this will get you started and you can always upgrade as you get further along.

Great kit so far, the case is incredibly nice for the price. the sockets are pretty nice. i like the organization of them and that they're laser etched and easy to read. great deal. I also heard that these are made in the same factory as tekton used to be made

I bought this set as a Christmas gift for my husband, who owns a lot of tools… just not complete sets of anything. He’s the kind of mechanic who has three versions of the same socket and is somehow still missing the one he needs at any given moment. This set was meant to close the gaps and provide backups for the usual suspects. Mission mostly accomplished. Quality: Right out of the case, these feel solid. The sockets are made from heat-treated chrome vanadium steel, and they have that reassuring weight that says, “Yes, you can put an impact wrench on me.” No thin walls, no sharp edges, no sketchy feeling under torque. They’ve already been used on stubborn bolts without any signs of deformation or wear. Finish: The black phosphate finish isn’t just for looks, it’s practical. It helps resist corrosion and makes the laser-etched size markings easy to read, even in a dim shop or when everything is already coated in a fine layer of grease and regret. The markings haven’t faded after use, which is a small but important win. Functionality & use: The 6-point hex design does its job well. Fasteners stay intact instead of rounding off, even under impact. The set includes both deep and standard sockets in SAE and metric, plus extension bars and a universal joint, which makes this a genuinely versatile kit rather than a “mostly useful” one. Whether it’s automotive work, shop projects, or general mechanical chaos, this set covers a lot of ground without needing extra pieces pulled from elsewhere. Size range: From 5/16" to 3/4" SAE and 8 mm to 19 mm metric, this hits the most commonly used sizes. It’s not a specialty set for obscure fasteners, but it’s exactly what most mechanics reach for day-to-day. For someone who already has tools but lacks organization or completeness, this fills in the missing puzzle pieces nicely. Case & durability: The case deserves a shoutout. It’s sturdy, well-organized, and has already survived a few accidental drops in the shop without cracking or popping open. Everything stays in place, which means fewer loose sockets rolling under benches never to be seen again. Value: At around $70, this feels like a fair price for a 44-piece impact-rated set that actually holds up to use. You’re paying for durability, coverage, and convenience, not just a brand name. It’s especially good as a gift for someone who works with tools regularly but hasn’t invested in a complete, organized socket set yet. Overall, this is a strong, practical set that does exactly what it’s supposed to do. Not flashy, just reliable. Four stars and a solid recommendation for the mechanic in your life or anyone looking to finally stop hunting for that missing socket.

Great product but came with two 12mm deep sockets, see photo. Please send a 13mm deep socket so I have the full set.

راح أعتمد منتجات نيكو في أعمال الصيانة لأنها رائعة جدا وممتازة جدا

Great socket set for reasonable price

Conjunto versátil e bastante completo e com preço razoável. Soquetes curtos e longos nos dois sistemas (métrico e SAE), que abrangem todas as medidas que eu necessito. A qualidade e resistência me parecem boas, mas isso só o tempo poderá confirmar ou não. Em resumo, uma ótima relação custo-benefício, de modo que estou bastante satisfeito com a aquisição.

Muy resistente a un bajo costo