4 X LED Fire Rated Downlight Can GU10 Recessed Ceiling Twist & Lock Interchangeable Downlight IP65 Chrome

I’ve had these installed for over a month now and I am thoroughly impressed! I can confirm they are honestly IP65 rated—I’ve had absolutely no issues with moisture or performance since they went up. 🛡️ I paired these with GY GU10 bulbs (also purchased here on Amazon) and the fit is seamless. They match perfectly and provide a really clean, professional finish to the ceiling. 🏠 If you’re looking for a downlight that is actually waterproof and built to last, look no further. Highly recommended for anyone doing a bathroom or kitchen renovation!

These were a breeze to install. I was replacing older lights and thankfully the hole size was the same so there was no extra cutting required. The only tool I needed was a pair of wire cutters. After cutting the wires off the old lights -I know I could have used a screwdriver but there was plenty of cable- I stripped a fresh bit of copper back and the wires just insert into the tool-free fitting. I gave them a good tug to ensure they were well secured and found no problem. I was literally able to swap each fitting in less than 5 minutes. Very pleased with the look of them too. The lamp cover twists into place but there's no satisfying click as it locks into place so I'm hoping that they don't loosen over time due to vibration.

1) The exterior bezel is supplied (3 colour options available) but not the bulb. 2) The recommended hole size is 75 mm but this is too big. The main diameter of the body is 68 mm. So once installed, the unit has to be manually centralised to avoid a gap appearing. A smaller hole would make a neater fit; if necessary shallow slots could be filed to allow the spring clips to pass through the plasterboard. 3) Instructions are included, and are in English only, but there are no diagrams which would have helped. As is often the case, they appear neither to have be written by someone who's actually used the product nor checked by someone using it for the first time. E.g. The terminal cover can be lifted using fingers to depress the latches, not levered up with a screwdriver, per instructions, which could damage it. No strip lengths for the wiring are specified and it's not easy to see what they should be. 4) The terminals are push-fit, not screw-down. Beware that there is only one chance to fit the wire; once it's fully home it cannot be removed again. Using long-nose pliers can help with pushing the wire fully into place. The terminals are made for lighting cable and will not accommodate anything larger. 5) There are 6 terminals in the connector, 2 each for L, N and E. This makes wiring easy for loops (connecting lights in parallel) but there is no spare terminal, as there is in a conventional pendant light. Therefore the light switch cannot be wired-in directly and requires a separate connection.

The downlights are perfect and exactly what I required. Connections first class and fitting straight forward. When I was fitting them to my traditional lath and plaster ceiling I managed to break two of the springs which was careless of me. I emailed the company direct and received replacement downlights by return… and even a couple of spare springs. Simply the best customer service I’ve ever received. I would thoroughly recommend these lights and this company to anyone.

Bought these to install in an en-suite bathroom. The units are well made and were easy to install, (although personally hate the quick connectors that come as standard with all lights). Would buy again.

Good figments with easy connections. Every thing you would require

I bought 8 for my bathroom shower room...but unfortunately I returned for full refund because I couldn't fit the GU10 LED bulbs, UNLESS THEY WERE ANGLED AND YOU COULD SEE A GAP WHICH DIDNT LOOK RIGHT. Also when I pulled the springs back the spring lug came out of its socket. easy to put back in but if it was in ceiling and came out would have caused me a problem. Looks and feels good quality but with only a 1 year warranty, I will buy else where with a 3 year warranty

Firstly the good points. It's a nice looking light once it's installed, and the internal metal clip that holds the lamp in position seems to work relatively well and might even work with the style of LED GU10 where the LEDs protrude in front of the normal sizing for the lamp (our LED GU10s don't protrude so I can't check this suspicion) but there are a few problems with the fitting although they can be worked around... The instructions say to drill a 75mm hole in the ceiling for the light but we found that a 75mm hole is too big - it takes a lot of fiddling to then get the fitting to sit flat and not hang at a slight angle. We found that a 72mm hole was infinitely better as the fitting then only just goes through the hole and then sits firmly flat. Annoyingly I had read the instructions and most of the holes we made were the 75mm size - if we hadn't had access to the loft space above the lights it would have been nearly impossible to make them sit correctly in the ceiling. The terminal block isn't the best design but it does retain the 1mm twin and earth solid core cable we used for the circuit. It would be so much better if the clamps were more like Wago connectors with pull up tabs that then positively clamp in place, rather than the sprung push-down tabs where it's relying on the spring to then retain the cable. The cable strain relief is completely useless. I gave up trying to use them and just put a cable tie through the holes that the strain relief is supposed to use. I can't even see how the manufacturer thinks the strain relief should hold the cable in place! Finally the terminal cover hinge snaps very easily. It would be better to either use the same clip on both sides and no hinge, or to make it so it doesn't snap. Once again I've used a cable tie over the terminal cover to stop it coming off. All in all the frustrations are almost worth the great value the fitting represents, as they look really smart now they're in place!

Estuve buscando mucho tiempo focos con una alta protección para poner dentro de la ducha. Además, por el falso techo del baño pasan muchas conducciones y no quería que la bombilla estuviera suelta. Éste foco solucionó todo a la perfección, y es muy fácil de instalar.

Article qui semble être d'excellente qualité, et le vendeur (Sanlumia) est très reactive, je mettrai a jour mon commentaire après installation .

Le spot encastrable en lui-même à l'air de bonne qualité mais il est trop court pour accueillir un spot Philips Hue White and Color Ambiance

Conforme à la description. Produit qualitatif.

Vraiment facile à installer 1h pour installer les 4