Wera Kraftform 2054 Micro Screwdriver - Hexagon Tip Sw 1.5 / 60

Super quick delivery, esp over Christmas. Quality item that replaces a damaged screwdriver in set. The colour coding, larger typeface and decal showing type of head is good improvement on older version. Wasn't cheap.

The screwdrivers themselves are fantastic. Made to last and fit precisely so don’t damage screws. The only issue I had was with Amazon’s delivery of a single piece. It was in a plastic ziplock bag in an Amazon card pouch and you could see where it had been buried under other items. The screw tip only being 0.12mm thick could have easily been damaged.

Perfect for the job

War tools are excellent and this is no exception

Used it to screw an m2 nut on a bolt holding a flange to the front of a model plane. The nuts are small and the shaft of the screwdriver needs to be slim to avoid catching the flange. The Wera was just slim enough to get access to tighten the nut. Quality is what you expect. The end of the handle rotates to make use more comfortable but felt a little loose. Hopefully, Wera quality will shine through and it wont be a problem. They are expensive at around £13 for one and you can buy a set of five nut spinners by Mannesmann for less than one Wera on Amazon. In my particular use case the Mannesman shaft was 0.3 mm wider than the Wera - not an issue for many uses but on model planes where access can be difficult small distances can make a difference. In my case the Wera saved the day but the recess for the nut is quite deep so I had to put six nuts in first to bring one nut to the top of the recess ready to be screwed on to the bolt. This is a bit of a faff and the recess in the Mannesman is much shallower so less fiddling about getting the nut just pointing out of the end of the driver ready to be screwed on to the bolt.

Love this range of drivers. Got the full set for our rc cars: 1.3, 1.5, 2, 2.5 & 4mm. Also got T handle versions of 2 & 2.5mm - handy for undoing any screws that I’ve loctite’d.

Works great and are no problems with this tool. Tool are nkt the cheapes but it was worth.

Excellent quality, well made

Quality is there.

Perfect t, high quality

Destornillador fantástico, robusto y fiable. Utilizo esta marca de desatornilladores desde hace tiempo y nunca he tenido problemas, son un poco caros pero merece la pena cada euro invertido ya que te duraran prácticamente toda la vida.

I needed a 1.5mm hex key with a ball end, because I have a screw I need to remove, but there is not quite enough clearance to get at it from straight on. The ball end hex driver made quick work of that pesky little screw.

It's a good quality 2.0mm screwdriver but the shaft is 2.5mm and it's basically a 2.5mm blade that has been tapered down to 2.0mm starting about 3mm up the blade (as opposed to a straight 2.0mm shaft to a 2.0mm blade). The taper restricts the use of the screwdriver to be outside any recessed gib screw hole. Giving three stars because it's a good quality tool, but taking away two because it's of limited use and should be described more clearly to indicate the taper. I would not recommend this product.