Kolpin 53350 ATV Rear Drop Rack Basket Convertible 3-in-1, Black, 43" l x 31" w x 10" h

Installed easy enough but we did but additional hardware to attach it for better stability. Very handy addition to Yamaha 4 wheeler.

Saw one at friend’s farm last week. Like being able to carry 5gallon buckets or chainsaw safely. Decided to buy name brand instead copy for a few dollars more. They are all made in China. Well worth it. Installed on Suzuki 750 King Quad AXI. Fit, finish and welds all good. Do appreciate the welds, corners and sharp edges were ground smooth prior to powder coating. Well made and designed hardware options. Used the longer Ubolts. Added 8, 5/16” washers under the Ubolts nuts. Installed over plastic rack cover to the metal tubing underneath. No drilling required. 7/16” flex gearwrench made this easy. Included 8mm Allen wrench tighten the eight frame bolts. Tight, no rattle or movement with gorilla test. Easy to install. Light but strong in the right places. Greatly increases the carrying and storage capacity. 5gallon buckets are the tool box of choice for many of repair jobs on the farm. Be careful with any weight added to an ATV.

Overall I really like this rack, but there are some points that could be improved. This rack provides a TON of space for working or storing items when running around the property. I like that it is lightweight and super easy to put together... took all of maybe 5 minutes to do. One thing I did add that is 100% not necessary was the 1x4 in between the ATV rack and the new rack. I added these to remove any noise from potential movement, as well as add a little more strength. A couple things I didn't necessarily love, but weren't a huge thing if you are able to get to a hardware store were: I needed to go buy longer U bolts due to the ones provided were fairly small. The mesh steel on the rack is pretty thin, so you really need to be careful that you don't break it by wrenching too hard on the bolts. Also I would have MUCH preferred mounting the bolts on the rigid brackets / flat pieces of metal going through the rack... but the way the wire mesh sits did not allow for that mounting option. I could probably slightly modify the rack to allow for stronger mounting. I'd make sure to go to the company's website to verify the rack "should" fit your ATV before purchasing on Amazon, but do know you will most likely by ready for a small DIY project to get it mounted. It was fun though! Pros: - Lightweight - Easy to assemble - Feels fairly sturdy once you get it mounted - DIY project was fun and simple Cons: - Needs longer U bolts to mount properly - Mesh steel is a little flimsy feeling

bought as a gift for grandpas fourwheeler. works great!! easy to assemble

I’m really loving the product so far. I have a 2013 Yamaha grizzly and some of the hardware does not work particularly with my fourwheeler not sure if it does with anyone else’s. But one I made my own brackets and had everything installed it is super sturdy and look absolutely great, I love it. You can fit a good amount of stuff in the back of the rack and tie it down easier. I would recommend this to my buddys to get for sure. Have only had for a couple of weeks so far, so not sure how good it will be holding up 1-2 years from now but I think it will hold up fine

Decent quality, but terribly unclear instructions and awful machining clean up on screw heads. After successfully installing the box on my quad, as I write this review, I have a painful metal splinter in my left pointer finger. As I was starting one of the screws by hand tightening it, the splinter slid in painfully and deeply. Overall, I am happy with the product, but NOT with the experience of putting it together, to say the least.

Good value.

I was looking at this product and the Titan rear basket. I chose this one because it was a little less bulky and i liked the idea of being able to raise basket if needed. It was easy to install and came with 2 sets of U bolts in different sizes to accommodate different ATV bars. Not great instructions on where to put U Bolts, but just have to see where it sits and where the best place to bolt it down is. I used some 200 lb zip ties to make sure it was snug all around. I dont like that the bolts stick up but i plan on getting a rack pad. First thing i noticed is the rattle. Not from the rack, but from the mesh. Its not heavy duty mesh and it sort of "pops" in and out in the middle of the basket and the rear of the basket. That little bit of "play" in the mesh causes a vibration that is very loud. Its like the mesh is a little too big or not properly welded down to the crossbars that run across the bottom and sides of the basket. With some weight in there, I dont think it would be as bad, but i plan to tinker with it some more. Overall, good size, will do its job, but could use more heavy duty mesh and properly weld the mesh down to prevent this vibration/rattle.

parfait

better than expected. secured it with 6 stainless hoe clamps, built a box for top portion that holds two 20 inch chainsaws, bottom rack hold all my straps, sledge and fuel, very impressed

Peça aparenta bons acabamentos e resistência. Muito fácil de montar e muito útil no transporte de cargas.

Je n'ai pas utiliser le support comme supposé mais je l'ai utilisé pour faire un rack sur mon côte à côte, parfait pour mon utilisation solide et bien fait pour ma part été facile a modifier

Excellent produit.