VonHaus 44 Piece Wall Mounted Pegboard Hook, Storage Bins and Panel Set - DIY Garage Storage Wall Mount System with Rack and Bin Accessories - Tool, Parts and Craft Organizer

I saw a couple of reviews stating it was great, but only for light tools. Not my experience! I have loaded this with most of the stuff I had lying around on shelves or in a drawer somewhere and there's some pretty heavy tools on there. The bin with 4 tape measures does slightly dip down due to the weight but it's only that. I'm really happy with it and would definitely recommend this.

Considering the low cost of this tool rack, I would say it's more than capable and I'm quite happy with it.After drilling holes in the garage wall and popping in rawlplugs, I lined up each of the back panels and popped the screws in. As it is entirely plastic construction, it was warped a bit, but that was quickly sorted out by using a few more screws. As someone pointed out previously, you don't need to use all the screw holes, and indeed I don't think they intend you to. There are far far too many, and some are right next to each other, giving the impression that it's more for flexibility (say, if one of the screw holes falls on mortar or something).I used about 12 screws per board, 5x30mm, with 8mm rawlplugs and 8mm masonry drill bit (just for anyone considering what screws they need for this, as it's hard info to come by!). I'd recommend flat heads as they'll sit a bit more flush.The complaints about the tubs bending under the weight of a feather are perhaps being a bit dramatic. I've attached a picture, and the two longer ones on the right hand side at the bottom there (bright orange) are the only ones that bend slightly, and that's only because they don't have any board under their lower half to support them. The two longer orange tubs on the left hand side are placed right under a couple of wall screws and do not give in the slightest.Of course, as I mentioned, this is an entirely plastic construction, so I wouldn't recommend chucking in car parts, but if you're like me, planning on just putting in things like a multimeter or two, resistors, capacitors and smaller electronic bits and bobs, there's not a chance any of these tubs will give way.Word of warning though, if your back panel is a bit warped like mine was, make sure to A) use a few more screws, and B) your tubs are actually slotted in correctly on both sides. They have two tabs, and it's quite easy to think they're slotted in, but aren't, due to the slight warping. Best way to tell, is push each left and right side of the tub down at the back. If it slips, it's not weak, it's just not slotted in correctly.

Ok let's start. Ignore all the bad reviews as this item does exactly as it states and is a great quality item for just over £20. Anyone expecting a professional wall storage unit then u need to look at buying a steel unit. I understand if one of the reviewers found it all damaged when opening but some of the bad reviews are nonsense....some guy reckons it took 24 screws to put up!! I doubt it or he has no common sense, I put mine up with 8 screws and it's solid. Another complained about having to mount it to a flat surface! Erm hello!!!My unit arrived and yes one of the medium orange storage bins was cracked...so what! A dab of super glue and some electrical tape and it's as good as new. Took 10 mins to drill onto the garage wall which by the way isn't a completely flat surface and all the storage bins hooked on with no problem what so ever.I am a DIYer and I had draws full of screws, bolts, plugs and all kinds of various stuff all piled in no particular order. Everything now has its place and I also managed to clear all of the older, not so good tools out of the tool chest making way for the more professional stuff. No more scratting through draws trying to find that right size screw. This little unit is just the job! I would definitely for the money recommend it to anyone and may even buy a second one as I accumulate more junk.

We installed this in the shed. It was very easy to put in and a great size. The quality is good but the only bad thing is you need to be careful not to overload the buckets with screws or other items as it hangs too much and can tip over.

You get what you pay, as they say, and this is a prime example of the quote.The plastic quality is poor (one of the grey storage buckets was broken on arrival). The bottom of one of the boards broke during fitting, although it was a crack that hasn't affected the fixing or use of the set.However, my biggest gripe (and oversight) is the lack of fixings. There are no rawl plugs or screws provided, and while I appreciate different people will be fitting the board to a variety of wall types, the least they could do is make this more prominent on the item listing.The hooks for hanging tools on are difficult to clip on and come off as soon as you remove an item from them. The storage buckets are okay. The screw head and tool slot shelves are as close to being a waste of time as possible, because they simply come off the board when you remove anything from them.That said - it is fitted and very useful. It's just a shame they could have made it slightly heavier duty and provided the rawl plugs and screws. If you don't have these already, you're going to be surprised at how many you'll need (38 if you use all the slots on both boards).

The VonHaus 44 Piece Wall Mounted Pegboard Hook, Storage Bins, and Panel Set has transformed my garage into a perfectly organized workspace. The setup was incredibly straightforward, and in no time, I had all my tools neatly arranged and easily accessible.What stands out most is the versatility of the system. The variety of hooks and bins accommodates everything from small screws and washers to larger tools like hammers and wrenches. The sturdy panels ensure that everything stays securely in place, even when I'm grabbing items in a hurry.This pegboard system is not just functional but also aesthetically pleasing, making my garage look like a professional's. It's an essential for anyone serious about DIY projects or looking to declutter their space efficiently. I couldn't be happier with this purchase!

I was looking for something that was affordable and would fit in my small workshop. The VonHaus Workshop Storage was the perfect solution.The product comes with several plastic trays. This is great for organizing my tools and keeping them in one place. The trays are also removable, which makes it easy to clean and maintain.The product also comes with some screwdriver and drill bit holders. These are great for keeping my tools organized and easily accessible. The holders are made of plastic, so they are not the most durable, but they do the job.Overall, I am mostly happy with the VonHaus Workshop Storage. It is not the best quality, but it is good enough for a home DIYer. The plastic trays and holders are great for organizing my tools and keeping them in one place. The only downside is that some of the pieces are a bit fiddly and can be difficult to assemble.Overall, I would recommend the VonHaus Workshop Storage for anyone looking for an affordable and convenient way to organize their tools.

Great stuff, every pleased, Many thanks 😊

Zwar ein billiges teil aber funktioniert.

Facile da montare anche se consiglio, come ho fatto io, di fissarlo prima su di una unica tavola di legno da appendere poi al muro. Questo farà robustezza e vi aiuterà ad allinearlo, dato che il pannello posteriore al quale si attaccano gli accessori è diviso in 2 pezzi. Forse un po’ leggerino in alcuni punti ma fa il suo!

Es funcional y practico. Ocupa poco espacio. Buena relación calidad y precio

Excellent! Well made! The various bins and individual hooks are fine but the plastic holders are a waste as they are wrong sizes, too weak, and do not offer enough variety. Overall, nonetheless, a strong well-made product.

looks nice,easy to use