Eallc Microphone Broadcasting Stand type1

Product arrived nice and early this morning - 2 days early, which is always nice and a seeminly recurring theme with Amazon. After reading the other reviews about this product I remained sceptical as to the build quality of such a cheap product. Man, was I wrong. This suspension scissor arm (thingy, the title isn't all that clear - somewhat amusingly) so far seems to be of excellent quality. It's holding up my Samson C01U with relative ease and all the little knobs are easily adjustable and come nice and tight. Surprisingly, the boom does not even sag under the weight of my mic. So far, I'd thoroughly recommend this product, especially considering it's amazingly cheap price. One year on (roughly) and this suspension boom is still holding up my mic with no issues at all. Definitely a worthwhile investment for anyone on a budget! I shall endeavour to update this review in about a month to see if the product is still as strong after some use.

Just set this stand up and first impressions are good... Pros: Build quality is reasonable for the price and it appears to hold a decent amount of weight. I'm using it with a rode NT1 vocal pack, which comes with quite a heavy mic cradle and it seems to have no trouble with it. Setting it up only took a couple of minutes as it came already assembled. I've not used the included mic clip that as my mic cradle replaces it so can't comment on that. Cons: My only complaint it is not as tall as I'd like it, I'd like each arm to be another 4 inches longer as I want to use my mic inverted and I can't get it in the position I ideally want. There isn't any instructions included, but you don't need any. There is a picture diagram on the side of the box, which is pretty self explanatory, although the labels are in Japanese/Chinese or something similar. Also When the arms are positions in the lowest possible position (i.e. the arms are 'closed' - all touching each other) the thumb screw to tighten it in position hits the springs, so you can't do it. But can't imagine a situation where you would want it in that position. Overall: For the money it appears to be good value and I'd buy one again. Tip: To keep everything neat, rather than wrapping a mic cable around the arm, which will invariably get pinched or tangled etc. I've zip tied mine to the back arm, leaving enough slack to allow for the full arm movement. It works well.

My son bought this to use with a Shure microphone Shure PG48, PG48-XLR I use when I do a bit of (bad) karaoke. He has it screwed to a desk to put voice overs on videos he makes with his friends (including FIFA 15 games). It woldn't look out of place in a radio studio The microphone fitted perfectly in to the adaptor, if you felt the urge you could cable tie it along the length of the arm but we haven't done that. The springs keep the arm in place and are simple to move. There is also a screw near the base which can be loosed to allow sideways movement. Very impressed with this, I originally thought my son had said it cost him £30 which would have been about right in my mind. For it to have actually cost a tenner is absolutely amazing for the quality. Top purchase and highly recommended.

Ever since I moved to Scotland a bit over three years ago – leaving my old boom mic stand behind as it simply was too heavy, bulky and oddly shaped to suit any of my parcels, giving it away to my nephews who also dabble a bit in sound recording and music – my large diaphragm studio microphone has simply been left in a box with nothing to do. Recently, I had some recording needs that couldn’t be covered by my instrument mic, however, and so I finally decided to get a mic stand to attach to my desk, something I had long considered. This one was very cheap, yet from the pictures and reviews, it seemed sturdy enough that I chose to go for it, and I am glad I did. Even though the adapter that makes it fit my standard microphone attachment shock mount is made from plastic, making it the weakest spot of the whole design, my general impression is that this is a solid stand, with suitably tight joints to make it move where I want it to and stay there as long as needed. The relatively heavy weight of my Sontronics microphone and its shock mount seems to be all in a day’s work for this stand, and when not in use, I can simply push it out of the way at the back of my desk. I find it so much more practical than my old mic stand, though of course this one only makes sense if you do your recording work at a desk. So, for hobbyist home-recording instrumentalists, such as myself, who play sitting at a computer, or for those who do narration, voiceovers, broadcasts or podcasts, this is a very economically priced stand that might just suit your needs perfectly. As for the plastic adapter, I think it will hold up well. If it gives up some day, it shouldn’t be too hard to get a new one in metal, though it might cost the same as a new stand and I might just get another one instead. The Same one, of course, as I am quite happy with it and its excellent quality for the price.

I would have rated this product higher but for a couple of issues. It is a cheap product and does the job required and is fair value for the money. The desk clamp is lightweight pressed steel and I expect it ti bend soon.. The pivot of the arm that locates into the clamp is hollow pressed steel and a as you tighten the swivel knob it tends to distort the pivot. I had to find a piece of rod and force it into the pivol to stop it distorting. The pivot need to re-engineered as the design stage. That said it does the job required

When I first looked at this out of the box it looked a bit flimsy and thought that it was a good job I was going to be using it with a light microphone (Zoom 2) However, it's quite a sturdy thing and because of the 'locking' nut at the 'elbow' joint this stand can easily be used with heavier mic's. So I'm currently using it with my Blue Yeti and it's perfectly stable even with that big chunk of metal on the end of it. The best thing about this mic is that it greatly reduces the background noise from things making contact with the desk - the original stand for the Yeti was notorious for that. The thing is that I still need a stand for my Zoom 2!... so I'm buying another.

Hi everyone, The arm is very good. It arrived ahead of schedule (before my first class item, even though I ordered this in standard delivery), and is oerfect for the space that I need it for. I will detail the advantages and disadvantages of buying it below. Pros: - Looks very professional, stylish, and geeky :-) - Perfect size for the space I need it for (it is quite short if you didn't know, however, you can definitely still use it). - Very strong. It supports my M-Audio Producer USB cardioid microphone very well, and my microphone is very heavy. Cons: - Thread is not particularly durable. I had to request a new thread be sent to me as my one stopped working upon screwing the microphone on/of a couple of times. - No instructions (I didn't need them, but some of you might do). - No cable ties come with the product (they are cheap, but it's annoying to have to get them in a different box). Overall, I am very happy with this, however, if you could just sort out the thread, then that would be awesome.

This thing might only be cheap and may not offer the same levels of adjustment a more expensive suspension arm may offer, but this thing is fantastic value for money. I got the all black design and it goes great with the rest of my equipment, it has a small range of left/right rotation, but as I wanted my mic to hang over my monitors, this thing does the job PERFECTLY. If you're looking for an arm to just hang over monitors or generally not need to be adjusted ALL THAT MUCH, it is WELL worth buying this product. Build quality seems solid, would definitely buy again if it broke.

Per il prezzo è ok . I materiali non sono male , molle ben messe con registro posizione precisa . È più corto rispetto a Quelli che si trovano sempre su Amazon. Io lo uso per lo studio di registrazione , Consigliato

Perfecto para hacerte tu setup streamer cumple con los requisitos por dicho precio

L'ancoraggio al tavolo è perfetto. L'adattatore per microfono comprende anche l'impanatura con doppio adattatore per microfono verticale, anche se dalle immagini non si capisce.

Lo utilizo para poner micrófono. Va un poco duro.

Ero scettico a comprarla per quel prezzo pensavo fosse immondizia, invece è fatta veramente bene. la consiglio a che ne cerca una! non ho trovato difetti tranne uno che sulla mia scrivania non si può fissare perchè la tavola è troppo spessa e dove si fissa l'asta è più stretta quindi controllate bene la misura del vostro tavolo. la misura del pezzo dove si fissa l'asta è di 5,5cm. PRO - economica - fatta davvero bene CONTRO - nulla