Ring Snuggies - The Original Ring Adjusters - Assorted Sizes

Ring Snuggies ~ Ring Sizer / Assorted Sizes Adjuster Set of Six Per Pack and B0014DGXU8, Original Ring Adjusters which comes in different sizes per pack. I bought these from Amazon, as well as 'yellow gold' metal ring adjusters last November. It was very cold inside the supermarket last fall; I lost another ring three times because my fingers shrank, but did nothing about trying these until last night when, with the advent of premature Spring (so far,) my thick ring began twisting on me. The assortment offers these plastic findings in round shapes, with a round i.d. and o.d. as well as the one(s) I have tried, which are more elliptical than round. The shape on the inside of each is also elliptical. At first, my eyes being what they are, I only saw the larger of two, and tried it, but after a night of being too conscious of it when I awoke to turn over, I checked the card contents, and found the smaller one. My ring finger knuckle has always been large, but I had no difficulty installing the finding on the ring after I was already wearing it. And voila! it feels so much better that I plan on not being aware of it at all. I have several rings, bought from the Q before the economy hit the fan (which means I bought my jewelry "right,") and no doubt will require more of these for them. It was always difficult for me to order the correct size for the intended finger. My late father was in the business, and I have a sizer in a box somewhere, but check out this department; Amazon has a tiny tape measure just for measuring fingers. (I have a man's hand, and cannot wear women's gloves, but small to medium men's gloves do the trick.) I do wonder if the plastic wears out after some time. I will not be purposefully sleeping with those other rings, but even with regular every-day use. . . Will I need to order more today to account for planned obsolescence later? (For the uninitiated, the word "findings" means something to those in the trade. Small pieces like these, pierced earring attachments, chain extenders, clasps, et.al. are known by that term.) Thanks, Amazon, for the RINGie dingies.

If I had read many of the prior reviews, I might not have purchased this product. I read a few reviews, purchased the product and my experience has been great!! In fact, I reordered several extra packages in case they become unavailable. My ring size and finger situation might be a bit different than some though. For me, I need a larger size ring to fit over my KNUCKLES but once the ring slides over the knuckle, it’s generally too BIG. This is especially true for any ring that is not a band style ring. The result is that rings that are not band rings SLIDE all over the place (including to the palm at times) and generally drive me crazy. Sizing the ring down would not work because I wouldn’t be able to get the ring over my knuckles (or get it off without tearing up my skin). I used to get two small gold or silver balls welded to the bottom of my rings by my jeweler to minimize the sliding. However, this cannot be done on rings that are plated, such as silver rings plated in rhodium (which minimizes tarnish and gives a more “platinum” appearance.) A couple of my gold rings also have a finish that prohibits this solution as well. Finally, my collection of rings has expanded into the hundreds and it’s cost prohibitive to have all the rings which qualify for the “ball” treatment modified. Plus, I get better results with the Ring Snuggies with less sliding. These probably work for me because they are put on AFTER the ring is in place. There are basically two options; a very minimal round shaped plastic band placed over the ring bottom or a larger plastic piece which slides under and then over the bottom of the ring band. Both work well. I find the larger plastic piece easier to put on and use it more often. However, because of its design the smaller attachment has a smaller “footprint.” The downside to the product is that I have a clear plastic attachment on the inside of my rings (on the palm side) which is more apparent with larger attachment than the smaller. Also, it complicates hand washing. Neither of these are a dealbreaker for me though. I almost never show people the palms of my hands and even handholding is relatively unchanged with the smaller attachment. Since I wear sunscreen on my hands while out during the day, I’m used to minimizing the things I touch and use hand sanitizer strategically (so I don’t wash the sunscreen off the outer sun exposed portion of my hands). If you’re someone who frequently needs to scrub your hands with soap and water, I don’t think this product would be the best for you. I also do not find the Ring Snuggies uncomfortable as many other reviewers seem to. This is probably because the part of my finger where the ring sits is 1/4 to 1/2 the size I must purchase to get the ring over my knuckles. I’ve gotten used to wearing them and don’t really notice them much while wearing. Best of all, no more SLIDING!!!

I have an expensive ring now and a problem that I'm sure many women face -- water retention, especially at certain times of the month. The ring fits very well at times I'm retaining a lot of water, and is rather too large at other times. Because my fingers are changing size a bit, it doesn't make sense to size the ring down. But neither do I like it slipping left and right on my finger. So I bought these. These work as advertised. I chose the smallest one. It was a bit difficult to get on the ring, the first time (it helps to have the ring on your finger first), but it has gotten easier as I have taken it off and put it on again. These are basically just short pieces of narrow-diameter Tygon or similar tubing, with slits cut in them. Most of the time, when this is on, I don't feel it. It's a bit of a problem when I want to do something like wash my hands or put on hand lotion; I don't like the way the slit in the tubing feels and it's a bit hard to dry my hands afterwards. But it's clear and it doesn't bother me while I'm typing, which is what I do most of the day at work. These were all different sizes and thicknesses and would suit a variety of rings. I probably won't use the others, now that I've found one that fits. But they are there if I'm interested. And now my ring isn't slipping around on my hand. I just wish they were a little easier to put on and more comfortable during hand washing.

My wife and I went with wide, tungsten carbide bands for our wedding bands. I tried on a tungsten carbide ring at the jeweler to get an idea of my ring size (~7-7.5) and ended up ripping skin off of my knuckle when I tried to remove the ring. So instead I ordered a 7.5 size band. When I got it it ended up slipping off my knuckles on most colder days and hoola-hooping around my much narrower finger. Being formerly of the mechanic trade, I have knuckles that are rather much larger than the rest of my fingers and so although the 7.5 fits snugly around my knuckle, there were days when it would simply slip off and the rest of the time was very loose and uncomfortable to wear. I don't know if you've ever tried to find a "metal" alternative for a tungsten carbide ring sizer, but if you have or are looking, I wish you the best of luck because you're not likely to find one either on Amazon or anywhere else. Which made the "ring snuggies" and similar "cheap, pvc tubing" ring adjusters pretty much my only option. I got these today in the mail and I have to say that I am absolutely loving them! I had to use the largest size in the package and it doesn't fit squarely around my ring but I think that might, in its own way, be better. I flipped the snuggie once it was on my ring so that the round, uncut side of the pvc tubing faces my finger and there is absolutely no discomfort to wearing it and it fixes the annoying "looseness" of my ring previously. I can now wear my ring with the confidence that it won't fly off my finger if I flick my hand too hard. I would highly recommend these if you have a band that is made out of an alternative/rare metal and or a very wide band as the selection of metal resizers seems to be limited for people with similar rings.

Before getting these I had lost my ring within a day and a half of getting it. Needless to say, losing my engagement ring was not an option and I didn't want to not have it while it was resized (plus, sometimes it fits, sometimes it doesn't). After finding the right "snuggie" size I have not had an issue since. There are a variety of different sizes in this pack and even some that will work with two rings (i.e. engagement ring and wedding band) together. The only problem is that when I go to rub my face or push my hair back the edges of the plastic can kinda scratch my skin, or the place where the plastic is separated from itself can catch my hair (not very frequently though as you can place that part against your hand rather than facing out). But, all in all, it works very well. I would highly recommend it- especially if your hands swell and shrink with changes in temperature. I never have had to take it off because it's just the right size even with the swelling. It's just enough to keep it on your hand and not strangle your fingers. It's perfect!

I had to get the ring snuggie because I received a wedding set for Christmas from my husband and I needed a size bigger ring because my hands will shrink and then swell and if I sized my ring it would no longer fit when my hands swell. Ive tried some other ring sizers and they were not as good as the ring snuggie . They were uncomfortable and left a gap between my rings.With the ring snuggie I can fit both my wedding ring and band nicely together with one snuggie. They have all different sizes to accommodate your ring. I love the snuggie because it is clear and you can hardly tell I'm wearing it!!It stays perfectly in place without any slipping or sliding around.Its very comfortable to wear.I used one snuggie for both my wedding ring and band and it holds them perfectly together. I have no more sliding around of the band and diamond.It makes my ring fit perfectly!! Its very easy to use and keeps my rings secure.I can not tell its there. The price cant be beat with the ring snuggie. I highly recommend this product if you dont want to size your ring. As I mentioned its also a plus that if your bands are not welded together, the snuggie will hold them in place perfectly, as if they were welded which is a plus. Also, the snuggie wont damage your bands like other metal ring sizers will. The snuggie is exactly what I was looking for! Im very happy with this product.

I really wanted to like these, but they didn't work for me. I am in the process of losing weight and don't want to resize my rings yet. I have two rings that I wear daily, very small/narrow rings (~5mm), and I used the smallest tube in the packet. Without trimming them, they were too restrictive, so I cut them down a little at a time until it provided the thickness at the base of my finger without going too wide and making the ring too small. I liked the general idea of these, but in reality washing my hands and putting on lotion gunked it up and made it less than appealing. They also occasionally popped off and moved around on the ring/finger so they were off balance. I occasionally pinched myself from the slot that's used to slide over the ring. They are 'well made' but simple little tubes of plastic. I ended up getting DipSize, which applies a slimmer/more wearable layer of silicone to the ring, which was a much better option for me.

I bought the Ring Snuggies after I lost the baby weight from having my son. I have no clue why I lost weight in my fingers but I did. Before going out and getting my rings re-sized I thought I would give it some time. In the mean time, I needed a solution to keep my rings from sliding off and possibly losing them. I tried a couple of options first: - I tied string around them under my finger and it worked, but it looked awful. I didn't think it would be noticable, but apparently I talk with my hands and this makes it very visible! - I also tried a product similar to this: Sizing Ring Guard . Once again, it worked, but it looked terrible as you could see the sizer on the sides. Also, it began collecting "grime" between the sizer and the ring. I don't wear my rings while showering or washing my hands so I'm not sure how it happened, but it did. Disgusting! My final attempt was the Ring Snuggie. It has worked like a charm! I'd like to warn that if your ring(s) have a thick band, you might want to get the "Jumbo Ring Snuggies" My engagement ring and wedding band put together are 6mm and the largest snuggie in the pack barely fits. Although, I think it may have stretched a little over the past month so it works just fine now. Other reviews have mentioned that their rings cannot be put on or taken off with the Snuggie already on and I have found the same thing. It's slightly inconvenient if you are taking your rings on/off all day long like me, but you get used to it and better at it. The deciding factor for me is that the Ring Snuggie is clear. I'm sure if someone was starring or if you pointed it out, they would see it but when you're just waving your hands around while talking (like many women do! haha), it's not noticeable. Overall, it's a good product and in my opinion the best option out there for ring sizers. Eventually I will get my rings re-sized if needed, but this is a good temporary fix. I'd recommend it to others.

No es tan útil como esperaba porque no se adapta a todos los anillos, y se sale a menudo sobre todo los redondos

The best I have found but very expensive for 6 plastic pieces - not a good range of sizes … some are too long which you can cut.

Very useful

Tienes varias opciones y probé todas hasta que encontré la más adecuada para mí y funcióna de maravilla

ganz toll sind die verschiedenen Größen. nur leider ist das Material sehr steif so das es sich nicht an die Rundung anpasst. Es macht den Ring dadurch SEEEEHR viel kleiner