E-cowlboy Drop Down Tailgate Table for 2007-2024 Jeep Wrangler JK JKU JL JLU Unlimited Sports Freedom Sahara Rubicon Rear Door Foldable Table Cargo Shelf Storage Cargo Luggage Holder Carrier

Installations was easy. Took my time and it took about an hour. Instructions are garbage. Watch all the installation videos on YouTube. It comes with a metal spacer for the bottom that matches the width of the plastic trim on top. Installed on a 2016 wrangler JK. Start with the tailgate closed and mark it for height. Put the top right screw in then level and mark the top left screw. Once the top two crews are in then mark the bottom two holes. Use a nail punch before drilling any holes. Once all for holes are done, then put the plastic piece back on the top to cover the wires and put the metal filler on the bottom and tighten it up. One hole had to be drilled through the top plastic cover. Easy peasy. Solid construction. Very happy with the finished product.

I installed this on my 2009 Jeep Wrangler JK Rubicon two-door. The table seems to be built pretty solidly. I like that the closure clasp has a little lock on it so that you can't accidentally open it or it won't open on its own. The cutting board, or wooden extension table, is pretty thin and you shouldn't be chopping turnips on it if you want it to last. The table has rubber bumpers on it so that when you close it, nothing rattles around and it all fits really tightly. That was a big concern for me but this table seems to pack up rattle-free. As mentioned in the title, the instructions for installing this product are laughable and utterly useless. I ended up looking for assistance via YouTube videos and found one that recommended using spacers between the table and the tailgate to get proper placement and function of the extension table while still allowing the black plastic cover on the tailgate to remain in place. This table is a Chinese copy of a South African brand, so if you know what that brand is, you can easily look up the installation videos on YouTube. The spacers in the video I saw were aluminum but I used PVC pipe cut to approximately 1 in lengths. I included a couple pictures for illustration. Since the instructions are terrible, there's no mention of how to use the sizeable bag of hardware that came with the table. I used my own riv nuts so I only ended up using four bolts, four washers, and four lock washers from the bag, leaving most of the hardware unused. The table also came with a large metal bracket and there's no mention of how to use it in the instructions either. Overall it's a great table, but not user friendly at all when it comes to installation. This company needs to get with the program and hire some American tech writers to help them with writing their instructions. Other than the complete lack of guidance during installation, I think this is a great product as Jeep tailgate tables go. None of them are going to be amazing examples of modern engineering and design, but this one looks like it's built pretty solid and like it's going to hold up over time. I'll be using it as soon as this weekend. So far I'm pleased with the product and the only reason I gave it four stars is because of the complete lack of guidance during installation.

First off, I put this in a 2022 Jeep Wrangler Willys with the ORM trail rail system installed. I used the trail rail on the tailgate to mount this table without drilling into anything just using some simple hardware (square nut, bolt, washer and rubber washers) from Home Depot. I also added rubber bumpers to the bottom corner (not attached to the tailgate, only the table) just to offer a bit of support when the table has weight on it. So it's off to a great start! Past that, this is a great tailgate table, solid build (I even dropped it while installing without any damage). Not absolutely stellar in every category but for the price point, well worth it. The latch has a spring loaded mechanism to keep it from piping open when driving around. The supports are solid metal opposed to the cable seen on other tables. The slide out table offers a good amount of added space and is ok material for it's purpose. If you're not satisfied with the pressed wood it comes with, use it as a template and make your own from any lumber you choose (future project for me). Pull out table does have a very slight sag as expected but not bad, even parked on an uneven surface this is flat enough to hold a can without sliding off. Overall, very satisfied with how this table turned out installed on my Jeep. Happy Jeeping!

Build quality seems great but definitely agree with the other posts that the installation instructions are awful. Do yourself a favor and look up Front Runner Drop Down Tailgate Table. They have a set of detailed and clear instructions and this one is an exact knockoff of that. The bottom left hole doesn't line up perfectly so make sure to thread it through before tightening up the support bar. Otherwise its clean and solid and doesn't rattle at all while driving.

For the money this thing is a joke it looks like a good idea but the instructions are horrible it does not fit a newer Jeep like it says it does

Update! Been rockin this table for years now and still love it! Others told me it would fail and not last but it's been epic! So I have a victory 4x4 rear bumper with swing out on my 5th gen 4runner. Victory 4x4 sells a direct fit folding table. But it's a lot more money and tiny. This one is larger, has the slide out to make it even bigger and fits just fine. I did have to drill and replaced the mounting bolts for grade 8 bolts from my local hardware store. I absolutely love it!! The extension is definitely cheap but super easy to replace once it snaps off 😂 I'll just swap in a quality piece of finished birch. This thing is a home run

*JL INSTALLATION TIP VIDEO INCLUDED* Can confirm, the instructions included are for the Jeep JK, not the Jeep JL. (2018-2024) You will have leftover bolts, dont panic. Those are for the JK installation. Dont know what jeep you have? Your tailgate likely has a sticker saying which model you own. FOR THE JL, YOU WILL NEED: *An Extra thick drill bit for drilling into the Jeep plastic panel. Drill bit needs to be THICKER than the black spacer tubes included in kit. Spacer tubes will need to recess inside your plastic tailgate panel. *Alan wrench set *10mm socket or variable wrench *Chewing gum or putty will be helpful, see video. *The patience of a saint OVERALL QUALITY THOUGHTS: * It doesn't rattle, thank God. Uninstalling it after that nightmare installation would have been aweful. * Great for light use. I would definitely cut up fruit on this table, but probably not something hard like carrots, etc. As I am using this table for plein air oil painting, it suits my needs just fine. * The wooden cutting board is very secure, but made of simple unfinished plywood. I see splinters in my future as the edges are already slightly rough. * Other reviewers mentioned having clearance issues with their trunk mats/ carpet. Happy to report I have no clearance issues on the JL. * The heavy duty metal frame is perfect for mounting a magnetic rechargeable LED strip light. Just stick it on and boom, you have an evening worksurface.

A nice, well constructed table! 3 stars because the instructions are worthless! I installed ours on a 2016 Wrangler which they say it fits… it does but with modifications! I had to put 1x1 square tube spacers so that it would clear the floor when the gate was closed, and so the extendable table would clear the hump on the inside of the tailgate when open. There’s no other way on earlier wranglers. I also used 1/4-20 nutzerts instead of sheet metal screws, but it definitely was a task to line everything up. If you’re not handy with tools or fabrication, I’d have it professionally installed. Otherwise, it’s a very nice, well made table!

Yes the table fits the Jeep JL and if you look at the hole locations they actually line up with 4 of the Trail Rail mounting points on the door. You need to make holes in the trim or remove it entirely. I chose to make the holes, I then cut down the spacers so that they protruded just out of the trim. Mounted it using the supplied bolts and it fits ok. However while it does have the rubber bump stops to prevent the wood rattling, they do not touch the metal shelf so while the wood doesn't rattle the shelf most definitely does. I had to fit a layer of 5mm DynoLiner foam on the underneath of the shelf to stop it rattling on the wood. The wood was damaged like it had been dropped and also had some odd staining on it. The screws to help it slide are too long, and the points stick up through the other side of the wood, so watch your fingers! I can't see the clamp that holds it together lasting long either, it's very flimsy and I've already had to bend it back in to shape once. It's an ok table, but not worth the price tag maybe if it was £90 - £100 I would have been happier with my purchase.

It will fit a 1989 jeep YJ wrangler. Super easy install. Nice having the sliding cutting board for extra counter space when cooking

Brilliant for our camper

It’s strong and well done the steel part. The wooden table is hard to extend and came with big scratches.

The table is well made but the instructions are sorely lacking. Extremely poor instructions. Other than that it is a nice item to have.