Sanus VSF415-B1 Small Full Motion LCD MT with 13" Extension Black

This is clearly the best built TV support. It is well engineered and solid. This is the second Sanus mount I've bought. My first was purchased over 6 years ago. While I successfully installed that first mount these installation direction now are very clear and a breeze to understand. The stud finder and level provided in the package are not very useful, rather use a real level and stud finder. However the template was very useful as well as the point probe. The mount is supplied with all the various hardware you need to adapt to the TV you are mounting. Mine was 100 x 100 and had holes on the main plate, removing 2 braces for large hole patterns. The full articulation of this mount is marvelous, and when its pushed back to the wall it still has a low profile. It is expensive compared to some of the knock offs, but here you get what you pay for.

I've installed many (as in probably 50-100) wall-mounts for televisions over the years, and my bracket of choice has always been Sanus. This bracket is no different. They have always been relatively easy to install (the most complicated part is actually the math of trying to figure out where to mount the bracket relative to its position on the TV - i.e. where you want the TV to end up when mounted), and come with very detailed instructions. This one even comes with a full sized template and a very handy level and manual stud-finder (uses a magnet to find the nails/screws holding the drywall to the stud, then uses a sharp tool to push into the wall to find where the stud ends), making this a real no brainer even for someone who hasn't installed one of these before. Provides plenty of adjustment, tilt, rotation, etc. I bought this to mount a 39" Panasonic LED at my mom's house in what will be her office, and she is very happy with the outcome.

Installed this in an RV cabinet, and it works like a dream. I mounted a 13 inch Supersonic LED TV to it, which has "view-angle" sensitivity, but this mount allows adjustment in ALL directions (including pitch) which allows viewing from any location, standing or sitting. It is stiff enough for driving without special stowing... it does not flail around while on the road. Only issue... this company (SANUS) makes MANY different TV mount models, and will certainly have a model for your needs. In my case, the first one I bought (and returned) was a universal type. It fit on the TV, but the big back plate covered 80% of the TV controls and input/output ports on the back of the TV. I had to go to their web site to determine the model number of the mount that worked on my installation, then specifically order it.

This is my 2nd Sanus mount to install. First was for a larger TV in office conference room and had to have full motion to mount in a corner. Really liked the quality of that mount so bought this one for 32" Samsung in kitchen and bedroom. I really like the single stud installation. the quality of Sanus is evident from the moment you open the package. Excellent instructions !! Came with a handy magnetic stud finder and small level which were both handy. The mount is very well made and sturdy - even at full extension. Some full motion single stud mounts may work as well but I know this one finishes out very nicely with a cover and has plugs to cover the lag bolt holes. If you need full motion, I think you will be very pleased with this one.

Solid build. Works perfect for my 32" LED TV. Instructions are easy to follow. It took me about an 45 minutes to an hour to install it. It took me longer to organize cords and devices (like Mini Tivo and Apple TV) onto back of TV. The hardest part with installing mount is locating studs within the wall. TV tilts and rotates in multiple directions. Mount allows TV to sit close to wall or extend out in multiple directions. Obviously the larger the TV, the less side-to-side rotation is possible. Suggestion: Use a good stud finder from local hardware store and locate the center of the studs. Use the mounting template (within the box) to determine exactly where to drill the holes. Level the holes with one another with a large level (not included). The level within the package is pretty much useless in my opinion. The TV does rotate in the event the mount isn't 100% level.

This is a really nice mount for the $53 each I paid. Although the picture doesn't show it, behind the center of the mounting plate is a sort of half dome assembly that enables you to tilt the TV to certain degree. I would suggest you check the movement BEFORE mounting the screen because there is a screw to adjust tension. Once the TV is mounted you won't have access to the screw. I bought 2 of them for a very good price, one for the bedroom and one for my office. I also mounted them up high near the ceiling, mainly so the one in the bedroom can be viewed while lying down. The one in the office is also mounted high to keep it out of the way. The system went together well and without any trouble. The only difficulty I had was finding the stud, but that had nothing to with the mount. I used the mounts to mount Insignia 32" Roku Ready TVs. I would recommend these to other people, but you may want to go to the manufacturers web site to get the right model for the TV you want to mount and they also have something to determine height including the TV. I used this to help me figure out heights for the bolt positions.

Easiest installation ever.This company really thinks through everything you need to install - down to an included stud finder. I have never seen better labeling of parts (each in a separate plastic section labeled by Step # !) Quality of mount is excellent - sets of spare parts to fit any installation / TV need (No searching for a different length screw set because your TV is slightly different -they are included!). I'm truly impressed. Will buy Sanus products without hesitation in the future. (Also purchased shelf VVA-401 -same outstanding product quality. )

I just set this up with minimum hassle. The instructions were clear and easy to follow and the manufacturer supplies a variety of hardware to accommodate a range of different TV models. The mount appears to be well-made with heavy-gauge metal and a solid feel. I'm pairing this unit with a light (11 lbs) 32" Samsung, so there is no issue with weight for my application. I'm glad I spent a little extra for a quality mount.