ChooChoo Side Table Living Room, Narrow End Table with Drawer and Shelf, 3-Tier Sofa End Table for Small Space, Espresso

These are great tables, especially to use along side a recliner and couch. They're easy to put together. Follow the directions! Everything you need is in there including the screwdriver!! Lay it on its side on the floor when your building it, tighten all the tabs a half turn and did I mention?... never use power tools when building small furniture like this. once they're done, you'll love them... there's a nice drawer to keep things in -- remotes, etc It's pretty, sturdy, I bet will last a long time. ♡

Was easy to put together and perfect for the space I bought it for. All the predrilled holes aligned just fine. Warning though. You need to hand screw everything so rest up your hand!

This is a nice-looking and sturdy side table. We found it easy to assemble. It works well in small spaces. Be sure to check the dimensions so you aren’t surprised by how narrow and long it is. The drawer is small, but big enough to hold some remotes or other small items. We ordered the white with brown top. Unfortunately, it definitely is not white but more of an ivory or cream color.

Great quality and very sturdy. Easy to put together in less than 15 minutes. Great addition to our living room!

Perfect size. Thought they would be a cheap "good enough" addition and they exceed expectations in looks and quality.

I couldn’t be happier with this side table! It fits perfectly in the small space between my sofa and the wall. The black finish gives it a sleek, modern look that blends well with the rest of my furniture. The drawer is great for storing remotes and little items, and the shelves are ideal for books or a decorative basket. It was also really easy to assemble—clear instructions and all the parts were labeled. Sturdy, stylish, and affordable. Highly recommend for anyone trying to make the most of a tight space!

There are a lot of pieces to put these together but all the parts and hardware were there. they do not give you spares so be careful, some hardware are small. They also give you a short handled screw driver which is needed for a few tight spaces. Once together though they look just like the advertised picture and the drawer operates smoothly. The color is true as well. The directions are OK but you should have a little common sense to put it together.

What a cute little table, right? And check out that happy little "Assembly Instructions" message at the front of the assembly manual. What's not to love? That message. Oooh boy, that message. That kept coming back into my mind as I went through the 90+ minute (what??) assembly process. I initially read that message and was literally put into a good mood because of it. I sat down in the floor, fired up some music to have playing in the background, and got to work. I think that happy little message made me take this less seriously than perhaps I should have. See, I typically spend time reviewing the assembly instruction manual for something like this well before starting the actual work. I'll inspect all the parts given me and really try to understand what's ahead of me before proceeding. But with this? With this happy little message at the start? What could go wrong? 1st off, you can see how there are 13 listed parts (8 is used twice, so 14, but who's counting?). That should have been my first clue to slow down and take this a bit more seriously. This is a small table, a table that doesn't command much in the way of respect but coupled with 14 separate parts comprising the bulk of the body, I should have realized that the diminutive dimensions would make things more, not less, difficult to work around. Then you get to the metal bits. There are over 75 pieces here as well. In all, you're just a bit shy of 100 unique parts that comprise this small unassuming side-table. Emphasis on the small, too. The boards go together in very specific ways. And they are easy to flip or switch around in the wrong direction, overlooking a placement that will cause you rework as you must back up later to fix. I didn’t respect this enough, having to back track 2 (maybe 3) times during installation. To flip a piece around as I wasn’t paying enough attention to the process during the process. Look at the “Step 4” image with the yellow highlight that I added. The instruction manual technically has what you need to correctly interpret the items needed and how to place them. And even though the instruction manual is a very welcome 8.5” x 11” in size, look at how small the images manifest on the page by the time you consider all the white space and ancillary information. The small dots on board “8” are critical for proper placement. But if you’re just breezing through this, they are hard to see plainly (the size *and* the angles aren’t ideal here) and you could overlook the proper placement of the piece (causing you to back-track later to fix it. This is because the top/bottom of the piece isn’t readily apparent in context and the image needs to be consulted to get it correct. Ok, so I’m a doofus. How is that ChooChoo’s fault? Well check out the included photo. Although the “C” screws in this step didn't technically break all the way through to the other side, they broke through enough to mar the surface and make the item extremely ugly after assembly. The screws are just a hair too long! Then, Step 5 was the killer for me. Understanding it was simple enough, but getting those little “G” screws screwed in? How hard can it be, right? 6 little screws that screw into pre-drilled holes! What could be easier? Well, many of the pre-drilled holes are too narrow relative to the screws going into them with this table. Again, by just a fraction. It causes one to have to exert considerable force to get the screw to bore into the wood. Obviously, that’s good from a stability perspective, but it was terrible in the moment when I realized that none of the screwdrivers I had handy were terribly suitable to the task (being either too large or too small) due to the close confines you find yourself in while trying to complete this step. Thankfully (seriously), the screws were sufficiently strong enough to withstand the high torque needed to crank them. I was really worried for a minute or two that it would be impossible to screw them in without stripping them, but that wasn’t the case. But getting the proper angle and sized head in place while exerting enough force downward to keep the screwdriver from slipping while turning the screw? That herculean task was *almost* too much for me. There were a few minutes where I literally thought that I wasn’t going to be able to do this without getting a more specialized screwdriver for the task. But after much time, frustration, and manipulation, I finally got those dang screws in place. At the end of this process, 90+ minutes of my life were gone, the sides were marred by screws just about ready to poke out of them, and I was sitting (in a full-body sweat mind you) there feeling as if this little table had conquered me!

I needed a couple of side tables for a very narrow space and these fit the bill perfectly. They are very nice looking. The wood finish tops were a dark brown and the white base was a true bright white. Assembly was very straight forward and the instructions were correct. Took me about 30 minutes to put together (all hardware was included). There is enough room on the shelves to put board games or books. The drawer itself is a little wobbly but slides smooth and would be enough room for small items such as remotes, chargers, cards etc. Great tables for a narrow or small spaces. The height was perfect for easy reach beside a standard height couch. Very good quality for the price.

Good cheap end table. Simple to put together with good instructions

Good quality for the price . Straight forward instructions and easy assembly .

This is a very sturdy, perfect sized little table that I was looking for. Disappointed that the price is $20.00 less now than what I paid 2 weeks ago.

Have to give this a 5 star, I am a novice at putting things together but this company's unique way of designing this product and how to install was awesome. I cannot give an exact time it took as I was going back and forth while doing other house. However if I need to buy another piece of furniture I'm buying from this company and also recommend anyone to buy from them. No stress, no hassle a lot easier than Ikea