aikeec USB American Truck Simulator Shifter, Gearshift Knob Fit for ATS & ETS2 Games, PC Sim Racing Shifter Compatible with Logitech G27 G29 G920 Thrustmaster TH8A Fanatec

Bought this to go with my t300 wheel and pedals because using the paddle shifters as range selectors just felt wrong. Other options for truck shifters like this can be in the hundreds of dollars so felt like this was a low risk to give it a try and it turned out to be great. Shifter was instantly recognized with no drivers. Both switches and the button work perfectly in Euro truck simulator which is what I use this for. Shifter itself feels pretty good. About the quality you would expect from a stock shifter in a fleet truck. Nothing fancy but it doesn't feel super cheap either. No sharp edges or weird manufacturing defects. Switches feel good to click. The only part of the whole thing that bothers me is the bottom which features kind of an ugly unfinished look almost as if there is a plastic trim ring that is supposed to go around the bottom that is not included. This isn't a big deal because it's just aesthetics and I will probably end up 3D printing beauty ring to go there eventually. Mounting was relatively easy on a fanatec club shifter. The threads of the knob do not match up with the shifter so for a while I was forced to use the included grub screw adapter. The included adapter worked okay. It comes with a variety of rubber caps to go over your shifter to stop you from marring the threads and they did that job just fine. Unfortunately, the grub screws kept loosening themselves with use, so after pretty much every session the shift knob would be floppy. The adapter also adds additional height to an already pretty tall shifter which felt slightly awkward. I scoured the internet looking for a thread adapter and while I was unable to locate any on any of the usual sites including McMaster, I was able to track down the exact thread adapter I needed that was even the perfect length I needed from a Chinese seller on eBay. A couple weeks later it showed up at my door and I threaded it on and it went mostly perfectly except for when it was fully tightened the indexing of the shifter was off so it was about 90° too far to the right. Luckily I was able to 3D print spacer to fix this issue pretty quickly. So now my shifter sits perfectly centered on the shaft and is at the correct height. Overall a pretty great experience for the money, especially if you're willing to do a little tinkering. Construction seems pretty good. The cable is literally just a Microusb cable plugged into the control board inside the shifter. So if the cable ever goes bad you can just change it which is really nice actually. It also seems really serviceable as all of the parts seem like off the shelf components and are easily accessible by simply popping off the cap, so if any of the switches ever start going bad you can probably just swap them out for a couple bucks versus buying a whole new shifter.

I recently purchased the USB American Truck Simulator Shifter and I’m extremely impressed. The first thing I noticed was the build quality — it feels solid, durable, and well-made. It doesn’t feel cheap or flimsy at all, and it has a nice weight to it that makes shifting feel realistic and satisfying. I put this on my TH8S shifter and installation was easy it came multiple adapters to ensure a nice solid fit Installation and setup were incredibly easy. It was basically plug-and-play with my PC, and I had it working in American Truck Simulator within minutes. No complicated drivers, no confusing instructions — just simple and straightforward. Overall, this shifter adds a lot of immersion to the game and performs exactly as expected. If you're serious about your trucking sims, this is definitely worth it.

After researching dozens of shift knobs and configurations, I finally settled on the Aikeec, and I’m glad I did. It’s a total game-changer for immersion in American Truck Simulator and Euro Truck Simulator 2. One important tip for buyers: To keep the setup feeling solid and professional, I highly recommend applying a bit of Loctite to all the threads during assembly. It prevents any loosening during heavy gear changes and keeps the whole unit feeling tight and high-quality. If you're looking to take your sim rig to the next level, this is the one to get.

If you love truck simulator games this is a true game changer it brings a whole new level of immersion and it makes truck simulator games like ATS & ETS way more fun. I used this for a very long time on my Logitech shifter and it works great. This shift knob is so much heavier than the stock knob it did make the mechanism feel weak but if anything that’s a knock at Logitech’s cheap products and shows how high quality this shift knob is. If you’re on the fence about this I’d say it’s 100% worth it, sim gear is expensive and this is a “cheap” (in the sim world) way to significantly improve your experience.

Looks good it works good with the moza hgp shifter but the top screw that clamp to the shaft won't connect to the shaft sense its above the shaft but the bottom screws do and it works I'd say its worth it for the price its at works for ats but you do have to go into setting and add the device yourself it won't auto recognize the device for you

I've been using this for the last week or two and honestly, it is a top notch product. I don't get where others are saying "3D Printed" - I own two 3D printers and this is NOT produced on a 3D printer. As a matter of fact, you can feel the seam running down the face of it from the mold. But beyond debunking that claim made by others, this is just a nice piece of equipment. I was actually thinking of buying a real Eaton Fuller shifter and modifying it, but the time and parts and headache, say nothing of the cost, this just looked close enough and honestly, it is. For the price of going for realism and converting versus just getting this and have a plug-and-play, there is no comparison - this wins out easily. The value for money is spot on - so worth it. It mounted easily on my Moza H-shifter, I plugged it in, went into the options on ATS and was up and running in a literal minute! If you are a sim driver and need a shifting knob for trucking, this is it. And the extra thumb button for the engine brake (or whatever you want really - but seriously - put the engine brake on it!) is just so satisfying. I honestly was using a sequential shifter and got tired for cracking through each gear, and wasn't ever even using the engine brake. Ooooohhhhh, I was missing out! I love this thing!

A fantastic upgrade to my American Truck Simulator setup—it adds an unmatched level of immersion. I highly recommend it.

Got version 1. So far so good. Had to restart computer for it to show up after first plugging it in for whatever reason. Otherwise install was easy on g27 shifter and works as intended. Great immersion increase for ets2 and ats. Build quality seems fine. Feels good. Significantly longer then stock stock so being mindful of the increase of force applied to the shifter base but that's not a fault of the product. Will update review if the switches don't hold up.

Una maravilla. De calidad, fácil de instalar y funciona perfecto. Lleva el simulador a otro nivel.

Best purchase for american truck,and eurotruck Great quality works like a charm

商品の造りはおもちゃっぽくなくしっかりできてます。しっかりトラック気分味わえます。右手でも左手でも操作に違和感ありません。やはりアメリカントラックのミッション味わうには延長ロットで床から長くしてみたいですね。残念点はVNMシフター経由でdefモードの認識してくれず残念。USB接続するとGAMEEXTENDと出るのですがウインカーのデバイスと同じになり見分けが出来なくなります。windows立ち上げ時にusb認識に失敗します。立ち上ってから接続すればいいんですけど。少し残念点もありましたが、説明書と8-10-12とアダプターもついてます、売り手の真剣な熱意を感じられます。古いデバイスをひっぱりだして組み込んでトラック気分になりたい時だけ接続するといいと思います。ありがとうございました。

Si la vdd me gustó mucho y es súper fácil instalar

Works perfectly on my fanatec shifter with ets2, and like you get a spare button too, quality build and solid on my shifter, and long enough cable too