Portable Dual Laptop Stand - Standing Table with Adjustable Height, Ergonomic Design & Anti-Slip Prongs for DJ Mixer, Sound Equipment, Workstation, Gaming & Home Use - PLPTS38, Black

I hade to ditch the studio desk due to space ect. So got this set up going and have my mic live 2 and Roland Tr-8S that couldn't sit side by side due to limited space. Well this stand came in clutch!! It's probably the best in terms of affordability, sturdiness, ability to really dial in hight overall and between top and bottom racks. My first attempt at putting it together I realized it wasn't going to fit under the screen in the picture. Though it's so versatile I was able to adjust it and it's just right. Putting it together was not hard just not snappy but I totally didn't even notice the instructions... So it's honestly overall pretty easy it's just a lot of different parts but again, pretty easy. Thank you for such an on point product !!!!

I'm not sure why someone said this is a flimsy device, because it works perfect for me. I'm also not sure why someone complained that this would be difficult to take to shows, because, you can carry this with one hand and it's lightweight. I'm happy with my purchase, and I'm not sure why anyone else wouldn't be, it's a great product that does exactly what it's designed to do. You might take it apart once or twice trying to get it right, but it's worth it if you need this to do gigs with. I put my DJ gear on top of a folding desk table, and it all works just fine, I have 0 problems.

As with others, I was a little concerned about the stability. It's not rock solid but the little bit of movement doesn't affect my performances, or my practice sessions so I call that a win. One of the cross bars came slightly bent making assembly a little challenging but overall still a good product and a great price point. If you're starting out, setting up your rig and want to save a few bucks, this is the way to go. If you're a professional, then maybe look to someone a little more permanent, or a solid road case with laptop shelf instead.

None of the other stands really offered what I was looking for, but like other people have said after reading the reviews I was hesitant because of the mentioned flimsiness and overall stability. When I first unpackaged it I was a little bit overwhelmed, because it wasn't obvious at first how it went together. After thinking about it for a minute and looking over, it really couldn't be easier. I feel like anything easier would be flimsy, and as long as everything is tightened well, which means checking all of the multiple pieces that unscrew, it should be plenty sturdy for you. As far as it being stable, just make sure everything's tightened down. Now I have done two mods to mine, which took no tools other than a pair of pliers. The first one I did was sometimes I like it really low, so in one of the photos you'll notice at one of the outside brackets has a little piece broken off the bottom of it, that's so I can lower it down all the way. I just took a pair of pliers and folded it back and forth until it weak into the metal and snapped off about a half an inch of metal. That's the caveman way of doing it, anything else would do better but I still got it done. The other mod I did which has worked for me pretty good in the last couple of months is to prevent the stand from tipping backwards which it might do if you have a lot of weight on the top and a light controller like I do, on the bottom. So I just moved up where you screw the stand in at. I'm only using one of the two holes, but I've got industrial double-sided tape other under the other end, which is just there to prevent it from sliding, ideally you would want to drill out a hole in either use a flat bolt and washer, or use the flat screw that came with it in and tap a new hole so you can screw in that front screw.. it's still super sturdy, as you can see right now it's loaded up and balancing on a bed, which it could not do prior to me repositioning the legs. They could be part of the reason why I think it's so sturdy . I usually have my controller and my laptop pretty flush, but I decided to raise it up just the middle platform recently to try to help my posture while playing at home. It's a great value for the money, and really nothing else I or other have seen has this form factor. And while adjusting the height on this isn't as fast as a push button clamp (what's used on aluminum crutches) I think this is far sturdier than that, and really not that bad to take apart and re-assemble, I wasn't looking forward to it until I did it a couple of times, not an issue at all. Height is sufficient enough to where you can even put a keyboard or some performance pads on the bottom if you're using on a desk. If I could go back I would purchase again without question.

Came in a huge box already put together and damaged. It was missing the rubber grips as well. In description it said needs assembly which makes sense but how I got it it was destined to be damaged as a frail item bouncing around in a huge box

I am a professional podcaster, and I've purchased many Pyle products over the years because they have reasonable quality audio equipment at a very good price. Though this device is marketed as a dual laptop stand, I use it in my studio to mount my audio mixer and a MIDI controller. It works fine for that purpose. I purchased it under $34, and at this price point, I do not feel like I've gotten a bad deal. But, this device, though it stands squarely on my desk and does not wobble in the uneven stance sense of that word, shakes when ever I touch a key on the MIDI controller or adjust the knobs on my audio mixer. It also lacks any support between the bars. So if you place anything on this which is not wider than those support beams, it just falls right through. That, I think, is kind of silly. Would a single plank across the platform have been too much to ask? Well, I didn't ask. I saw what it was and I bought it anyway. I should not complain too much about that portion of the design. But, you should keep it in mind for your purchase. You can also forget about this thing being portable. I do not think it is designed for that purpose, but Amazon asked me to rate that portion of it so I will comment upon this. The device is way too large to be carrying around full assembled. It is easy enough to assemble/disassemble, it takes a few minutes. But it is basically a bunch of metal bars and screws, and I wouldn't want to take this on the road with me. I regularly travel with an alternative set of studio equipment. Frequently, I purchase a cheap product, and after seeing what it lacks that the higher priced product provides, I buy the higher priced product and downgrade the lower priced product to my travel gear. That will not be happening with this device. While one could theoretically take it apart, put the pieces in a bag, and take it with them, it would be supremely impractical, and too much hassle to do in each hotel I went to when there are better products suited to that purpose. This will remain where it is until I replace it, and then I will throw it in the recycle can.

As a DJ, gear that’s portable, sturdy, and functional is a must—and the Pyle Portable Dual Laptop Stand delivers on all fronts. I use it for gigs, practice sessions, and even in the studio, and it’s quickly become one of my most reliable pieces of kit. The dual-tier design is perfect for holding my laptop on top while keeping my controller, mixer, or secondary laptop right below. The adjustable height and angles make it easy to customize for any setup, whether I’m standing during a set or sitting while producing. The ergonomic design really helps reduce strain and keeps everything right where I need it. Build quality is excellent—the stand feels rock solid with no wobble, even when I’m typing on my laptop or cueing tracks mid-set. It folds down compactly, making it easy to pack up with the rest of my gear, and setup at venues is quick and hassle-free. What I love most is that it gives me a professional look on stage—organized, elevated, and clean. No more awkwardly stacking gear on crates or tables. For DJs, producers, or even live streamers, this stand is a game-changer. Highly recommend it for anyone serious about keeping their setup both practical and professional.

Very impressed with this dj controller/laptop or iPad stand, very good quality, directions could be a bit clearer, but not a deal breaker. It is very sturdy.

I got it used which as a good price however this isn't sturdy so I put the box in between to eliminate the space it doesn't move as much after that I wish assembling was bit easier but if you play around you will eventually get it for 30 bucks it's worth it

Good quality and sturdy, one of the best buys in Amazon. Highly recommend it. This hold my DDJ FLEX 4 and if we'll placed, leaves room to hang the headset.

Gostei muito do produto fácil de montar e suportou muito bem o peso da controladora e do notebook.

Très bon matériel

Thank you amazon for huge discount price. I got it for only 87dhm and it really handle very well my 2.5kg Panasonic Toughbook with Hercules Inpulse 300. It wiggles a bit but it doesn't bother me as long as it keeps organize my equipment.