Steel Demon Carbide Teeth Reciprocating Saw Blades for Thick Metal - for Extreme Metal Cutting - Carbide Tooth Design - 6" Length, 3 TPI, 3-Pack - DS0608CF3

I needed to cut a front control arm off a 2007 Buick Rendezvous because, for some insane reason, the manufacturer used a huge torx bolt with a round head. While I had the correct size bit, after nearly 20 years of north-east weather, that bolt wasn't going anywhere with just a torx bit. So, after spending far more time than I care to admit trying to get it off, I decided I'd just cut the darn thing. Unfortunately, none of my blades were up to the task since, surrounding that bolt inside the bushing, there was a sleeve made of probably the hardest steel I've ever come across. I spent probably 2 hours and many blades just going at it non-stop before I gave up. After some online searching, I saw some recommendations from others in similar frustrating positions for these particular blades. So, I bought them and, when they arrived, tossed them on my Sawzall and went to town. It did take about 30 minutes and plenty of water for cooling, but it did the trick. Long story short: Other blades suck, these blades are awesome, and I'd like a few words with whoever was in charge of bolt selection for this vehicle.

These blades saved me! I've used them now for two different control arm projects on two different vehicles. These things slice right through steel bolts and bushings. I have only used one blade so far to cut two grade eight bolts, and make multiple cuts through steel bushings. These things are awesome and these projects would have taken a lot.longer without them! Just buy a set of these to have on hand, because you never know when you'll need them!

If you have to cut steel use this blade first, I burned through and broke many others before I tried this one best blade I've used and works in half the time

Blades hold up a long time. Cuts a little slow on 1/4" steel but can cut a very long time compared to other blades.

Mild steel will cut like butter. Welds - not so much. Then again, welds are stronger than material being welded. These blades have saved me a lot of time and headaches countless of times. They are expensive but we can do anything about that. When you need it vs a zip disk - it will be all and end all. For things that I can cut with my portabandsaw - nothing beats this. For things my Zip disk, bandsaw can’t reach, these are VERY handy. I use this on a corded sawzal - lets be honest here, Milwaukee (I have one - cute for quick jobs) ain’t got nothing on corded tools. I hope they make them sharper and longer lasting as time goes on.

They worked really good, like crazy good but the price is pretty steep. There are lots of options put there more economical, hence the 4 stars.

Easily made 4 cuts through seized control arm bushing sleeves & bolts with a single blade. And, that same blade has plenty of life left. This product exceeded my expectations & made light work out of a potentially challenging repair job.

I had 168 feet of 1 1/2 inch (quarter inch wall) steel pipe pulled from my well. I bought these blades to cut it down into 6 foot pieces I could throw in the back of the truck. I got through all 168 feet on one blade. And the last cut was still like a skill saw going through 1/2 inch plywood. I could not recommend these blades more. Amazing.

These cut through a control arm easily and with barely any effort from me.

Absolutely top quality for the investment

Best blade on the market for metal. Makes Milwaukee ones look like trash.

Top blades

J'adore ces lames! Fait pour la grosse job, elles coupent rapidement les bolts, je les utilises pour la mécanique