Gilmour Cleaning Sprayer Foamaster II Multi-ratio Spray Gun 1609706073

I purchased this to wash my 2018 Sierra truck and it works great! Let me start by telling you my previous method. I was using a Sun Joe 2030 psi pressure washer with a foam canon. The cons for myself were having to move around the pressure washer, garden hose, power cord, and pressure hose (20 ft.) around a large truck. A 50 ft. hose would have solved those issues, but I didn’t want so spend an additional $70+ for that. However the biggest inconvenience was having to rinse the suds off, it seemed like way too much effort than was necessary to do. So this is why I wanted a foam gun instead. There are 5 settings for the amount of soap used A through E. E being the max will drench your vehicle with tons of suds, the downside is you’ll be out of soap very quickly! I found C to be the best for a large truck. I was able spray a coat of suds on one side and continue to spray as I used a wash mit. I washed my entire truck and had a little under a 1/4 of soap left. Detaching the bottle and using the pistol grip to rinse is awesome! It’s not a fan spread type, but more like a blast of water. You can quickly rinse the entire vehicle while removing any bug spots you missed. The quality of this product is good, the plastic used seems pretty durable. As long as your not tossing it around your driveway like a garden hose, this should last for a long time. If you’re looking for an alternative to a pressure washer, this is the way to go!

I got tired of having to drag out the pressure washer and foam cannon to was . the cars. it took more time to drag out and hook up the pressure washer than it does to do the actual washing, then you have to clean it out and pack it back up. So I decided to give this one a try. It works great IF you follow a couple of steps. first, you need to see what setting works for your soap. Second you need to dilute with water some thicker soaps. I used the cheap meguairs stuff in my garage and it was thick like honey, at first try it did not do well even on the E setting. so I added about 2 ounces of water to the soap and swirled it around to make it mix this was basically a 3 parts soap to 1 part water mix at this point. suddenly it started shooting a LOT of suds. I was able to back down to the C setting and was getting awesome results. do I get the sticky snow soap? nope. but I am washing cars, not setting up a photo shoot. This cut my washing time down to 1/2 of what I had before. effortless to set up, no real cleanup, no real teardown. now I can spend time waxing and detailing. Remember you may have to dilute your soap if it's too thick, and you have to change the settings to get what you want. you have the setting too high if you cant get the soap off the car easily when rinsing.

This foamaster is a nice quality foam gun. It could use some improvement in one area, but it is still one of the better foam guns that hooks up to the water hose. Using it just makes washing my cars easier, faster, and with better end results. I mostly use chemical guys Citrus wash and gloss soap with it. A few ounces of the soap and it foams up really nicely with the gun just on the second setting. The foam reduces the chance of getting swirl marks when washing your car, but my favorite thing about the foam is that you the soap is already on the car. So you dont need much soap in the bucket to get your car washed properly. Just enough soap in a bucket of water to soak your wash pad and get a few suds on the pad is enough. The gun is made of plastic. A durable plastic, but its still plastic. That isnt why I gave it 4 stars instead of 5 though, because everything seems to be made out of plastic these days. I think the gun is durable enough for me to get my moneys worth out of it, but I like it so much I ordered a second one for when this one finally breaks. Anyway the reason I gave the foamaster II 4 stars instead of 5 is because of the detachable spray gun itself. The gun for some reason only shoots out a stream of water which isnt a deal breaker, but I really dont like hitting my car with a heavy stream of water and with spray gun no matter how you adjust the nozzle or press the trigger you just can not get it to shoot a spray of water.

I have a clear bra paint protection film on my car and didn't want to use a pressure washer or foam lance on it for fear or it pushing up the film. This Foamaster II is nice and gentle, yet it still puts a lot of foam on the car, and it just attaches to any normal garden hose, no pressure sprayer needed. It's so much easier and more efficient to use this instead of a bucket to wash your car although I still have a microfiber wash mitt in a bucket in order to wipe the foam after it has set on the car for a few minutes. If the car is not that dirty however, this step may not even be needed. For the price, this is very well designed and the foam level adjustor works well, unlike some others where it's either on or off with the adjustor not working well. This is a great product, I wish I discovered it earlier!

This is the 2nd foamaster i've purchased through amazon. (i love it so much i bought two..) it seems to be the case that people these days buy the foammaster for their cars. I bought both to make washing my cars easier. Well i had a chance to put the unit through some testing today. I accidentally dropped it on the ground from the 2nd floor of my balcony today, and it landed with a thud, but absolutely unscathed. The quick detach works great to make it just a host attachment without the gun itself. OK back to the actual foam..Settings A B C D and Off are provided, but A+B to me seemed no different. Same for C+D. in fact you might as well just make the settings low, high, and off instead...The requirements are that the suds to generate properly need a steady high pressure of water in order to work properly, so make sure that you have that pre-requisite! Otherwise the foamaster II does the duty quite well! it allows my car to pre-soak in white cleansing bubbles while i prep my bucket and sponge, thus allowing for less paint marring, and better chances that dirt will come off the car quicker and more efficiently than just with a hose and sudsy wash mitt. Highly recommend!

The gilmour foamer does the job: gets you foam but without any kind of pressure. Water comes in, out with the foam. Everything comes unassembled inside the container but it's very easy to set up. Has a dial to adjust from just water up to a loooot of shampoo (A to E), I personally use D. The trigger is very firm and fits nicely in your hands. The quality of the plastic is quite something but could be perfect with a volume marker on the side, for both Liters and Fl. Oz. I'd recommend 1 squirt of shampoo for 5 of water, even less. 4 squirts of shampoo should do for washing perfectly the car and rims. Rinse the car with water then foam your microfiber glove with the gilmour to soak it. Wash the panel of the car and rinse with the gilmour, hovering with the glove in straight ways, no circles since they are harder to remove. Also I recommend buying the Gilmour quick connector set and shut-off valve to use with a pistol grip. Go for it

This is my first foam spray, it’s pretty decent, the options is a nice touch, I personally like option E, more foam the better. You could easily detach the foam cannon and use its hose gun to rinse off but it’s not strong, so I normally switch hose guns, buying the swivel adapters is a must that way you aren’t turning and unturning to remove the hose gun when with a pull and click they can come off easy and install a different one with ease. I’ve prolly used this about 5 times, so far I have no complaints of leaks or anything breaking on me

Two must have products for anyone who washes cars. Makes the process so much easier. Gilmour 95QGFMR Foamaster II Cleaning Sprayer Forget the ol' sponge and bucket. This thing soaps up and rinses my car within minutes. I've always hated reaching over and bending up n' down just to soap up my car. This things saves me both time and stress when washing my baby. PROS: - Speeds up the car washing process immensely. - No more bucket and sponging. My back and knees thank you! - Off switch so you could still water the plants. - Inexpensive CONS: - None Pilot Automotive CC-2010 11" Soft and Dry Water Blade Before, I had to work fast to get my car dry. The longer I take, the more water spots I would get. This thing makes drying a breeze (pun intended). PROS: - Quicker and more efficient than wiping your car dry with a towel or shammy - Doesn't leave lint like towels or shammies - Fun to use!!! - No need to dry or wash it (like towels) CONS: - Doesn't work as well on complex curves - A squeegee-like handle would be nice

Works a treat and for the price better than expected.

It's not as good as a foam Cannon for a real power washer of course but nothing will be, and I think this is about as good as you can get with a regular hose. For the price I find that the quality is very good, it does a pretty good job of foaming up the soap. The quick disconnect for the hose is a nice convenience too. I've had no issues with leaks on any of the interconnects. The trigger action on the sprayer goes through several different spraying styles as you pull it, starting with a sharp narrow blast, then a wide cone spray and then finally a heavy-flow low velocity that is good for filling buckets and drenching things. It takes some technique to use this effectively because you have to hold the trigger in exactly the right place but it's a very nice subtle touch that I appreciate. I had to put some grease on the trigger action to loosen it up but after that haven't had any trouble with it since.

Great product had the original model before this newer version can’t fault it

It's exactly what I expected. A foam wash sprayer that suds my vehicles. Easy to use, easy to attach. Connects to a standard lawn hose and sprays a good amount of soap suds. I use Meguiar's Gold Class Car Wash for my soap and it works perfectly. Very convenient that the spray handle detaches easily for the rinse of the soap. Remember, this is not a high pressure foam wash so if that is what you want, this is not the item for you. But if you want a soap sprayer which disperses a good amount of soap suds so you don't have to use a bucket, this item does the job.

As a foam gun it works very well. But remove the foaming attachment and the gun is not nearly as effective. It leaks when the trigger is lightly pressed and it takes surgical precision to get a proper shower mode (or any mode except FULL trigger). Happy and disappointed.