KNIPEX Tools 78 03 125 Electronics Super Knips, 5-Inch

Finally a true, flush cutting, snip for soft wire. I build scale models and needed a flush cutter for soft wire and tubing. I've tried many cheap ones that didn't work. These KNIPEX are modestly priced around $30 and are worth every penny. The photos show .8mm brass tubing, which is the largest I will cut with these. One picture shows a cut using the KNIPEX, the other using a cheaper brand. The cut was flush and had minimal pinching of the tube--the hole was still open using the KNIPEX. Using my other set (orange handle in picture), the cut wasn't flush and the hole was almost pinched shut. For the small copper wires I use (the largest is 22 gage) these are excellent.

This was my first time purchasing Knipex brand tools. I've used Knipex tools that were owned by others and was happy with their performance so I thought I would give these cutters a try. I was not disappointed. These cutters worked very well for close trimming of leads. The grip was nice in the hand and they cut well. I would recommend to a friend and purchase again if needed. The way these are built I doubt that I will have to purchase another set of cutters anytime soon.

I bought a pair of Klien flush cutters a month ago; they were ... okay. They lasted a month and broke. I decided to splurge and buy the Knipex. Just buy the Knipex and call it good. Excellent cutters in every way.

Flush cutters that can ACTUALLY flush cut zip tie tails. Leaves zero sharp bits sticking out.

Love these knippers. Highly recommend. Especially for zip ties

Tsunoda KBN-150 - 6” https://www.amazon.com/dp/B0756YR7XX/ref=cm_sw_r_as_gl_api_gl_i_ZVS2YSNTYP3Q79QEVG3M?linkCode=ml2&tag=subjeccyclis-20 - Cable tie puller provides excellent grip for tightening - Jaw opens very wide - Exceptional sharpness - No spring for assisted opening - Point end is slightly flat, not a sharp point Tsunoda PN-175 - 7” https://www.amazon.com/dp/B009FT3QA8/ref=cm_sw_r_as_gl_api_gl_i_7DANNFNVJSR5N3JZTWVN?linkCode=ml2&tag=subjeccyclis-20 - Jaws open wide - Exceptional sharpness - Spring tension is modest - Sharp pointed end - Nice balance of size with large cutter head Tsunoda PN-200 8” https://www.amazon.com/dp/B009FT3Q44/ref=cm_sw_r_as_gl_api_gl_i_BBXD03GPEDGY6KW8DGZ1?linkCode=ml2&tag=subjeccyclis-20 - Jaws open wide - Exceptional sharpness - Sharp pointed end - Spring tension is mostest - Bolt-stop helps protect cutter edge from damage under high leverage - Larger size provides extra leverage for effortless cuts KNIPEX 78 03 140 - 5 ½” https://www.amazon.com/dp/B07MZF6SPZ/ref=cm_sw_r_as_gl_api_gl_i_VTGWQ2FSVK5SC255KH67?linkCode=ml2&tag=subjeccyclis-20 - Jaw opening is very narrow - Hinge action is velvety smooth - Spring tension is excellent - Exceptional sharpness - Sharp pointed end - Best corrosion resistance Selection/Comparison For your particular application, one of these tools may be preferred over the other. All cutters offer exceptional sharpness and solid construction. The 6” tie cutter model lacks a spring to assist opening. However the jaw opening is unparalleled and the grip section is terrific for tightening zip ties. It’s flat ground tip was likely chosen to protect the surface beneath a zip tie while cutting. This limits some precision use but makes sense given its intended application. Its head is also angled to allow easy access for flush cuts against walls or in tight spaces. While the KNIPEX offers exceptional quality, the narrow opening jaws severely limit its versatility. However, for the right application the KNIPEX would be great for delicate work in a compact form factor. The grip, spring and precision tip are terrific. The hinge action is unrivaled. For a tradesman tool, the lack of a tip protector or spring lock is a mistake. However, none of these tools offer a lock for transport. Both the 7” and 8” Tsunoda cutters offer the same quality and features with the 8” adding a bolt-stop which can be used to promote blade protection or to execute partial depth cuts. The 8” also offers a slightly larger/longer cutter which could be beneficial for cutting large plastic crate-ties.

My favorite flush cuts

This is a typically flawless tool from Knipex. I have several tools from Knipex, which I buy only when it is a tool that I must absolutely positively depend upon to get a job done. Otherwise I seek out alternatives. The tool is made in Germany, living up to the German reputation for top-quality tools. Good looking, well-finished, and everything about it is perfect. I did a test cut, comparing the Knipex to a close competitor, the Xuron 170-II. These cutters are the same length, style, design, and differ only in the materials (the Knipex is Stainless Steel), and in the manufacturer - the Xuron is made in USA. The Knipex is more than twice as expensive as the Xuron. Does it cut twice as well? Not really. It DOES cut NOTICEABLY better, which is usually only obvious when comparing junk tools to good tools. But that's Knipex for you. They go the extra millimeter. If you want the ABSOLUTE BEST, then this is the tool for you.

Initially it operated perfectly, then while tring to cut through a thin flat battery tag, the lower blade snapped off completely. All my other Knipex tools work with perfect satisfaction. Allen 21/05/2022

work very well for soft wire and zip ties used it on small diameter stainless wire and damage the cutting edge slightly very good for cutting alloy sump plug washers off would buy again

نفس الموصفات

Construção e acabamento impecáveis. Dá a impressão de que vai durar para sempre (se utilizado da maneira correta).

High quality and durable flush cutters, excellent for small wire, 3d printing filament and zip ties.