Anker 6-in-1 USB C Hub with Ethernet, USB C to 4K HDMI Multiport Adapter, 1Gbps Ethernet, 65W Power Delivery, 1xUSB-C & 2xUSB-A Ports for MacBook Air, iPad Pro, XPS, Home Office and More

I use this adaptor to hard wire an ethernet internet connection straight into a Samsung Galaxy S10+ with PD (charges phone while connected). I also use an S8+ which works, too. This is a great option for those of us who understand the dangers of being exposed to low-powered microwaves all day and night (AKA Wi-Fi). While hard wired to ethernet, you can enjoy the internet with airplane mode on, which is a big plus! I've used several different branded adaptors (the ones without PD kill your device's battery QUICKLY) for this purpose, and this Anker outshines them all. Most other brands (I've tried Belkin, Ugreen, and some other somewhat obscure brands) work fine for a short time and then begin to get spotty, losing and regaining connection intermittently until crashing and not working at all over a short period of time, usually not longer than 3 to 4 months if you're real lucky. However, I've had this Anker for nearly a year (10 months and change), and it's still going strong. Now, it's not perfect. It does lose connection from time to time and then regain connection just like the others, but nowhere near as frequent, and if you are mindful of the orientation of the cords and take care not to twist or put torque on them once they're connected to a device, it usually keeps connection very nicely. Be sure to put the device in the proper orientation through which you'll be looking at it, and THEN connect the adaptor (don't connect the adaptor and then have to roll the phone over to look at the screen, as this is the fastest way to kill the adaptor and loosen your phone's charging port). When first attaching, I plug the ethernet cable into the adaptor and use a hair-tie rubber band to wrap around the end of the ethernet cable, making sure it's tight with no slack, then I secure it around the BASE of the type-C cable coming out of the opposite end of the adaptor (see attached picture). Then LEAVE IT. If you incessantly disconnect and reconnect this adaptor, I guarantee it will not last as long. As for the features of this adaptor, I can only speak on the ethernet connection, the PD port, and the type-C 5gbps port. The PD port is nice because if you try connecting to the internet and doing pretty much anything without it, your device's battery is going to drain quite rapidly. How fast depends on how good your device's battery is to begin with. S10+ probably won't last half the time without PD as it does with PD. Just realize that your device is not going to gain power while charging through the PD port, but rather the battery will merely die at a slower pace, giving you more time before having to recharge your device. The other factor is how long your charging cable is (the shorter it is, the longer the battery will last). Tip: While using PD port, your device will not warn you of your battery about to die since it is technically charging, so if you're doing something important, you had better keep an eye on your battery percentage, lest it dies unexpectedly. I've not used the hdmi port at all, so nothing to speak on there. The 5gbps type-c port is nice if you want to connect an external hard drive while either A: connected to the internet, B: still being able to charge your phone, or both! I use the Samsung Portable SSD T7, and the Anker is great for saving large videos/files straight from the internet onto the external hard drive. The Anker is also good for freeing up space on your phone by moving existing files to the hard drive while continuing to charge your phone (otherwise, the hard drive connects directly to your phone, so your charging port is being used, and if your battery is low, no charging). Also, if you disconnected the ethernet cable from the Anker while moving files to an external drive, I suspect that the PD port would actually add battery percentage instead of merely slowing down the loss of battery percentage. To summarize: - Don't get Wi-fried: use a hard-wired ethernet connection instead! - Great adaptor that lasts longer than all others I've tried. - PD is a must have feature, but your device will still eventually die. - Great for saving videos/large files straight from internet to external hard drive while being able to charge device simultaneously. This Anker is the one you're looking for! Cheers.

Extremely good quality. I've used many Anker product over the years and this one didn't disappoint! Needed it to run a laptop on my network in isolation mode and to have accessible connections for ethernet as well as a wireless mouse and extra cooling fan as my laptop has only 1 standard size USB 3.0 port. This is the mini version so It won't necessarily supply enough juice to charge your laptop at the same time (there's another 8 in 1 made by Anker for that) but it can supply enough power to maybe get you through a very trying session, very short term. Super-easy to connect and just works. Fits comfortably in my carry bag too. Very light weight, good heat dissipation although I didn't really have any or at least not much. Compatible with all the connectors you see in the picture. In my case at least, it wasn't a luxury it was a necessity and it proved it's value immediately.

Relatively cheap, lightweight, and better than most. It gets warm, but not hot. The Video adapter was immediately recognized by my Macbook and works flawlessly at all resolutions made available (much higher than Windows PCs) I used it both as the recipient of my 65W Mac charger, and the Mac received its power from this device; I also had the 65W Mac charger plugged directly into the Mac, and this plugged into the second USB-C plug on the mac. It works (HDMI monitor) both ways. It says that the ports are not for "charging", however be aware that they do charge when devices are connected, for example my iPhone to the extra USB-C port, or the USB-A port. My Logi back-lighted keyboard lights up too. I don't know why they say it is not for charging. Perhaps it is simply saying there are no ports expressly intended to do charging without connecting to your computer.

Works as intended. Solid build quality and works with my Windows laptop through the USB C connection. I wish the product description would clarify that the USB ports do not support video.

Works well. No performance drop noted.

TL;DR installing the latest Realtek drivers fixed the Ethernet disconnects/drops/reconnects for me. When work issued me a new laptop (HP ProBook 650 G8) without a dock I knew I'd need to find a good USB-C hub with adequate power delivery (45 W or more for this ProBook). I went back and forth between a few different models but I have lots of Anker products that have served me well so I went with this one and paired it with the Anker Nano II 65 W USB-C Charger and cable combo. I use it for 4K HDMI @ 30 Hz, 1 Gbps Ethernet and a USB A connection to my peripherals via a USB 3.0 4 port hub and switch. I've used it daily for over a month now with no issues except the Ethernet drops/reconnects which I'll get to next. The Ethernet port is a bit tight and makes disconnecting some cables difficult; might be an issue for users that travel with the device. Setting my laptop down on my desk and connecting a single USB-C connection is easier and more reliable (so far) than the old laptop and dock I had been using. I experienced random, periodic network disconnects and reconnects with this device that I did not experience with the laptop's Ethernet. I'd experience maybe 4 - 8 reconnects a day. It wasn't terribly but I'd have to reconnect some of my clients afterwords so I started to look for a solution. I searched through the reviews here and found that others were experiencing similar issues. I found that my Windows 10 PC had a Realtek USB GbE driver from 2020 so I went out to the Realtek site so see if they had an update for the RTL8153 Ethernet controller (AnkerDirect says it uses an this chipset in the Q/A section). I found their Win10 Auto Installation Program was recently updated so I downloaded and ran it. I'm now running version 10.49.20.1102 of the driver, released on 11/2/2021, and haven't had a single drop or reconnect since (over 24 hours). Hope that helps some others that experience the same.

The Anker PowerExpand 6-in-1 USB C PD Hub has proven to be an indispensable companion for my daily technological needs. As someone who relies heavily on my MacBook Pro and other devices, this hub has transformed the way I connect and work. First and foremost, the 65W Power Delivery capability of this hub is a game-changer. It ensures that my devices are charged quickly and efficiently, eliminating the frustration of slow charging times. Whether I'm working on a demanding project or simply need to power up my devices, this hub delivers the power I need, when I need it. The inclusion of a 4K HDMI port is another standout feature of this hub. It allows me to extend or mirror my laptop's display to a larger screen with stunning clarity and detail. From streaming high-definition videos to giving presentations, the HDMI port ensures a seamless visual experience. The 1Gbps Ethernet port is a welcome addition for those who rely on a stable and fast wired internet connection. It guarantees that I can stay connected even in areas with weak Wi-Fi signals. Whether I'm working from home or in a crowded coffee shop, the Ethernet port provides reliable connectivity for uninterrupted productivity. The design of the hub is sleek and compact, making it incredibly portable. It easily fits into my bag or pocket, allowing me to carry it wherever I go. The build quality is excellent, with a durable construction that gives me confidence in its longevity. Moreover, the hub's compatibility with USB-C devices is a major advantage. It seamlessly integrates with a wide range of devices, including laptops, tablets, and smartphones. Whether I'm using a Macbook, Dell, HP, or any other USB-C device, this hub ensures seamless connectivity and functionality. Setting up the hub is a breeze. There are no complicated installation processes or driver downloads required. Simply plug it into the USB-C port of your device, and it's ready to use. This plug-and-play functionality adds to the overall convenience and user-friendly experience. In conclusion, the Anker PowerExpand 6-in-1 USB C PD Hub is a must-have accessory for anyone seeking to enhance their connectivity and productivity. Its impressive power delivery, 4K HDMI output, and reliable Ethernet connectivity make it a versatile and essential tool for professionals, students, and casual users alike. Investing in this hub has greatly expanded my capabilities, allowing me to connect multiple devices and enjoy seamless productivity. I highly recommend the Anker PowerExpand 6-in-1 USB C PD Hub to anyone looking for a reliable, feature-packed hub that unleashes the power of connectivity. With Anker's reputation for quality and innovation, you can trust that this hub will exceed your expectations. Say goodbye to limited ports and embrace the convenience and versatility of the Anker PowerExpand 6-in-1 USB C PD Hub. It's a game-changer that will revolutionize the way you connect and work.

works great. I can plug my backup into it and my printer, so I don't need to connect the printer to the internet.

ان المنتج ممتاز لمن له حاجه به حيث يؤدي الخدمة بطريقة ممتازة وننصح باقتناءه

Produto internacional, chegou antes da data prevista. Robusto, responde muito bem em todas as conexões. É um pouco caro, mas não deixa o usuário na mão. Tenho outros produtos da marca ANKER, são todos excelentes!

Travel friendly

Es un adaptador eficiente, que no se calienta. Y funciona sin contratiempos en mi Mac y en el ambiente windows. Calidad de imagen según especificado

تم وصول منتج غير مطابق لمواصفات الاعلان في الشكل او المضمون