Benazcap Screen Protector Compatible with Samsung Galaxy Tab S7 FE

I used both and its the same result..left bubbles and corner you can lift. ><>< 7/5/22 Updated Review ><>< Soo after my review, the company reached out to me very concerned with my experience with their product. My initial thought was, they are gonna tell me what I was doing wrong. Total opposite. They showed genuine concern, acknowledged my dislike of the result using the product and IMMEDIATELY offered to make it right! Not only did they offer i was given the opportunity to see in my opinion how THEY could make it right. Most of these companies tell you what they are going to do and you deal with it or not. Ummm No...again total opposite. They actually listened and rectified the issue swiftly. Now THAT is true customer service by a company who stands behind their product and value their customers. I have received the replacement item and I had the tech at the cellular store install it (as they did the last ones) and no bubbles, no lifting, fits fine and looks like I expected it to initially. I would truly recommend ordering from this company because they get it. They understand the value of customer service and stand behind their products. I felt the need to tell the good behind the initial post because they made it right and I'm happy. Thank you sooo much

The screen protector arrived very fast and everything needed for instalation was included. The screen protector is sturdy in it's thickness but didn't interfere at all with both of my Spiegen cases. I did have to use a credit card to make sure the edges of the applied screen protector were properly under the lip of the Spiegen case, otherwise after putting the case on with the applied screen protector it will have bubbles. If this happens it is because the case is not properly covering the edges, so just slide a plastic card (I used a credit card) under the lip of the case to make sure the screen protector is covered. After this I had no bubbles. A hint to the meticulous: apply the screen protector in the bathroom area after running the hot shower as the steam will take the dust particles out of the air. These dust partcles are what frustrate the application process for if dust gets either on the tablet or the screen adhesive side when applying it, then you will have air bubbles. Another hint is I actually used the case I have for my Samsung tab S8+ as the guide for applying the screen protector (instead of the guide stickers for the hinges). This worked better for me as the case leaves no room for misalignment and guides the screen protector perfectly in the application. The guide stickers (in my past experience with large tablets) are not perfect and I noticed always a milimeter off on one side that actually is noticeable after the application and then one has to lift and reapply to get it perfectly aligned. I'm very satified with this screen protectors so far, and above all can assure that it works with the Spiegen cases.

When I received this product I had a hard time getting the screen protector on without any bubbles, and I found the bubbles very difficult to get out. Was initially disappointed and wrote a review to reflect that. However, the Benazcap Team quickly turned that disappointment into a positive feeling about their product and my experience with them. They contacted me immediately and offered to send me a new set of screen protectors, which I received a couple of days later. The second time around went much smoother with the application of the protectors. NO BUBBLES! The product comes nicely packaged, with all the tools you need to avoid bubbles, and adheres very well to the screen with crystal clear viewing. After a rocky start due to not being able to get the protector on properly, great communication from Benazcap, a quick solution and a high quality product made this an excellent purchase. Highly recommend!

The feel of the protector is very close to the screen on the Tab S8 series (plus here). Touch sensitivity is good; my finger reads fine even with the pre-protector print, but works like normal with re-doing the fingerprint after application. The oleophobic coating seems as good (or maybe even better...) than the tablet's screen. However; there is a caveat here. The product packaging has poor quality control, which leads to warping of the protectors if you're unlucky. For me, the stickers on the side of the box were not taut, so during shipping the application components bunched up at one end and warped both protectors. The top one was too warped, and wouldn't fully adhere to the top at all. The second one was better, but I had to end up putting heavy books on top of it for a while to get it to stick for good and the very edge of the top isn't adhering so eventually dust will build up. It's incredibly difficult (at least for me) to put on a protector without micro bubbles, and there are a few after application, but it's just the nature of such a large screen. Long story short; if you get lucky with a properly packaged one, this is a good deal for two protectors. Even if only one works, it's still a good deal.

Great product, fits perfectly, easy directions

I basically never leave reviews but read them often before buying--I feel so strongly about this that I had to review I bought this cover as an extra precaution for my new tablet, figured it was an affordable preventative measure for scratching in addition to my external keyboard case. Recently, the tablet fell off the table and hit the hardwood floor HARD, corner first. I was devastated when I opened the keyboard case to see a crack had appeared in the corner of the screen. I figured the outer case was the only way it could have survived the fall. The tablet still functioned but the crack seemed so deep. So imagine my surprise when I peeled back this cover to find that the crack was JUST in the screen protector! I don't know how, but it fully absorbed the shock and my tablet's screen is still pristine. Replacing the screen would have been a minimum $250!! Tldr: I cannot recommend this screen protector strongly enough!!

Great screen protector! Installation was very easy, the stickers on the side made it easy to line up perfectly and if you ever so gently lay it down, you can still make small precise final alignment adjustments to it before it sticks to the tablet. Just make sure you get it really close when you lay it down the first time. And when your satisfied its centered good, just press down on the center and work your way out towards the edges. Then use the supplied squeegee to remove any remaining bubbles to the edge. Mine didnt have one single bubble as you can see (hopefully) in the picture I provided. It fits the screen perfectly too in my opinion. You want it to be JUST smaller than the screen. Its only maybe 1/16" smaller all the way around the edge. (maybe less, definitely not more) Not even noticeable. The touch screen works great and the clarity is phenomenal! You can't even tell its on there if you get it on right. (No bubbles, hairs, etc.)

I recently purchased this screen protector, and it has been a great addition to my device. It fits perfectly on the screen and was easy to apply without any bubbles, which made the installation process quick and stress-free.

Great Product

E adatto per il tab s11 ultra 14.6 pollici, leggero , temperato, s installa comodamente, c'e' anchevun bidro

Good protection.

This has been one of the easiest screen protectors I have ever installed - the 'hinge' stickers are a great feature and mean you get an accurate fit rather than having to constantly lift and reapply. The protector has had NO effect on the functionality of the screen or the S-Pen. It still looks just as clear and beautiful, the colours are not washed out and are still bright and vivid, and there has been no negative impact on the sensitivity of touch or the S-Pen. I would recommend this manufacturer and seller, and will buy again in future - though as the pack included a second screen with a second set of application tools, I'm hopeful that won't be for a while!

The screen protector is clear, sensitive to touch and exactly like not even having one on. It doesn't fingerprint, so far, and I'm just overall 100% happy. When I did apply it I made sure my screen was super clean, ZERO lint and after carefully putting on the protector there was a few bubbles. What I did then was, I placed the screen cleaner down and used the smoothing tool over top so as not to ruin the SP and slowly worked each one out. Sometimes it did come back but I kept slowly smoothing them out changing directions of the tool and about 5 min later they were completely gone and still are. I use the Samsung case but I also tried, 2 days later, my Ringke fitted case. I was very careful when putting it on and a couple of bubbles came up in the corners so I gently lifted each corner a bit, smoothed the bubble and it was gone. Both cases are a win. Worth the money and just take your time applying this. I will definitely reorder this for my S7+ tablet in case if needed. I still have 1 left, it comes with 2 so unless I drop my tab and it breaks the protector I shouldn't need more. **I actually wiped the plastic that was to be removed to ensure no point ended up on my screen... One correction, it does fingerprint a little bit however not anything like the regular screen sans screen protector.