apiker 4 Pack Screen Protector Compatible with Samsung Galaxy Note 10 Plus, Soft TPU Film Support Fingerprint Sensor

This review is based on extreme outdoor/indoor use. I've tried many--if not all--screen protectors. The glass tempered ones: they only have a thin adhesion around the borders, dirt/sand makes its way through the camera opening. The protectors that you spray/squeegee on: for outdoor use, they tend to start bulge-curl. This protector offers complete adhesion with no spray-on stuff. I was skeptical at first. The kit has an ingenious method of aligning the protector on your screen with an even more ingenious method of applying the protector. Once aligned, you peel-pull-push the protector one half at a time. It's designed as to not touch the adhesive side of the protector, eliminating fingerprints and dust. Once it's on, looks great and most important, it functions. If you're a human with manicured hands, a cushy job in a medical clean environment, those spray-on protectors may do the job. If you're in the field often (beach, forest, parks, etc) where it tends to be dusty, silty, and sandy, you want THIS protector. I don't give a F about Gorilla Glass, Hippo Glass, Rhino Glass, or any other miracle glass cellphone manufacturers create. Although Mother Nature is beautiful, she does not discriminate. Those microscopic particles of silica, crystallized quartz, and other minerals found in sand/dirt, will eventually build up and scratch the heck out of your screen. This will cause your screen to appear hazy as now silts and dusts accumulate in the scratched grooves, exacerbating the screen crisis. With this screen protector, that issue is now gone. Its adhesion is strong enough to hold up with outdoor/fieldwork activities. There is one quirk though. Since the protector is soft, like a hydrogel, I have experienced that a microscopic sand grain or two embed itself in the protector. It will give an illusion as if some sand grain made its way *under* the protector. Rest assured, it's not. Yes, I placed the phone under a high-powered microscope to confirm that it's embedded on the protector, not under. This does not bother me when it happens for two reasons, 1) the protector itself is intact, affixed, and continues to function and 2) the kit has FOUR protectors. My routine is to change the protector every 8 weeks or so, regardless if the protector looks great. The 4-pack at the great price, makes this protector the best choice for protecting your screen from microscratches.

Bought these about 2 weeks ago and they are great so far. They fit my phone perfectly and they are very easy to apply. They stick quite well and I am able to use my fingerprint scanner again. Even after 2 weeks there are no visible scratches and no bubbling. Well worth buying. You get 4 in a pack. I will definitely buy them again.

Works well to protect my phone. Very easy to install. Only downside is that it bubbles up and warps under extreme heat.

Easy install. Proper tools, including alignment fixture included with kit. Touch & fingerprint sensor respond well through covering. Flexible plastic, not glass so it is not a perfect impact guard. But it confirms exactly to the phone's curved screen edges.

My review for the Apiker TPU film screen protector I only buy Otterbox cases and Zagg Invisibleshield film screen protectors for my Samsung phones. I purchased a renewed Note 10 plus 5g phone and wanted to try another screen protector other than Zagg for the issues it had with my Otterbox. Zagg would bubble up with the Otterbox case. My renewed Note 10 had smudges and you could see the fingerprints all over the screen. This is so annoying and a little embarrassing. After constant searches and reading reviews on many screen protectors, I decided to give this one a try. The price was also enticing especially with 4 protectors provided. The installation was easy and a little instruction book gives you easy instructions. It is way much easier than installing Zagg and a better price. And yes, it had two a few bubbles after installation but each day, the bubbles began to disappear. You can't even tell that I have a screen protector, it is that great looking- gives that brand new screen look. Overall, if you are looking for great looking screen protector-not the glass type, great price, easy professional installation and fits perfect with your Otterbox case...this one is for you.

These are exceptional in just about every way and especially if you don't get them around too much constant, warm humidity. I'll get to that last bit in a moment. And there were a couple other oddities I had to deal with but all in all, they will probably suit most users. The good: 1. Install is easy; def watch the videos first 2. Once installed, the screen is visibly great. Touch screen perfect. And the thumb scanner works as good as a screen with no protector at all. 3. Comes with 4 protectors; this is a bargain for the price The bad: 1. Mine protectors at least will dislodge off the screen post install when removing the phone from my pocket but only when in work day hot, humid conditions. I've noticed this with two consecutive protector installs. The first was irreparable ... the second install has come loose a bit but I was able to simply press it back on and I'm still using this one. 2. The little plastic alignment tool that you are supposed to insert in the USB port and then use to place the screens on the phone would not easily plug into the USB port in the proper orientation. I ended up not using it at all after the first install. Oddly, this plastic tool plugged in fine in an upside down orientation but was very quirky when inserting the correct way. YMMV. Otherwise? I bought these to go with the purchase of a new Note 10+ refurb off of Ebay which did not have the factory screen protector installed; this unit most likely had a new screen installed or had simply had the old screen protector removed. Anyway. I watched the install video several times, which I recommend as it makes things fairly easy and then installed the first screen protector (of the four they include with the kit). It went fairly smooth but I found that the little "alignment tool" that is supposed to plug into the bottom USB port, did not plug in easily in the proper orientation ... that is with the alignment pins pointing up so that one could then lay the film down on the three tabs. Ironically, the alignment tool plugged into the USB port just fine if inserting upside down but that did me no good as an installation aid. With some careful fiddling, however, I managed to get the USB alignment tool inserted and with the three tabs pointing up so I could hook the screen/film onto them. The screen installed easily with a few tiny air bubbles that disappeared after a day. That being said, I work in a hot, humid south Texas outdoor environment and have always kept my phone in my front pants pocket of my Dickies work shorts. This has never been an issue. However, on day three post installation of my first screen, upon pulling the phone out of my pocket during the middle of a particularly hot, sweaty and humid day, the new screen protector pulled half way off the phone when pulling it out of my pocket (the phone will naturally rub against the pocket fabric/edges when removing it and this is what caught hold of and caused the new screen protector to dislodge). I installed a second screen protector that same afternoon, this time the USB insert/alignment tool was again difficult to insert and when I did get it inserted, it would immediately push/slide back out so I just followed the same installation directions while simply first lining the screen up on the phone, using the little cut out at the top, where the camera is, as a way to first align the screen protector and before going through the top/bottom application process. This second install has worked fine and is even cleaner than the first. I have noticed though, again, that the screen protector will easily peel off during the work day if during a particularly warm/humid time of the day and specifically when pulling the phone from my pocket. But at the asking price and considering the other positive aspects of the product? I could only recommend them as they are basically dirt cheap and you get four. I'm simply going to try my best to work around the humidity/heat issue and make them last as long as I can. I'll most likely explore other options when I go through the remaining two protectors but all and all, a good, functional product with a couple of quirks.

I installed a lot of screen protectors in the past on my devices. The apiker 4 Pack Screen Protector absolutely the best I have seen so far. Delivery is good, on time and the most important, smooth and easy installation. I am very satisfied with this product, will highly recommend it, and definitely will buy it again.

I don't usually write reviews unless a product is really, REALLY good. This - (HA!) - has me even uploading pictures! It is THAT good. Ok, so! I've used TPU screen protectors (Bodyguardz brand usually) for the last 2 phones I've had, both Notes. I bought my current Note 10+ (the one in the photos) when it was brand new - almost 4 years ago. I prefer TPU to tempered glass. I am familiar with tempered glass protectors because I installed and used them on my Samsung S series phones. However, I've found the vinyl doesn't scratch like glass. This is the 'self healing' process they speak of in action. Other reviews mentioned its thinness. It seems normal for a vinyl screen protector but if you're used to tempered glass, this will seem thin. This is actually great for curved-edged screens, though. No lifting. And this also means it will work with most cases. AND it won't interfere with the fingerprint scanner. I've also never had a TPU fail at protecting my phone's screen which is huge because I am a certified klutz. So why am I so excited over this one that I would grab my husband's phone and start taking pictures? Well, let me tell you. Even though I'm used to applying TPUs, small bubbles would always seem to appear which I would be squeegee-ing out for days. But this!! Holy moly, Batman!! I watched the video, set everything up, applied the protector and BAM!! When I peeled off the last layer, it looked so good I couldn't believe my eyes! My phone looked brand new. It's surface is glassy smooth (not rubbery) so my stylus glides across it and not one single bubble. NOT ONE! My phone came out looking as good as the one in the video. No joke. No lie. No bubbles. Just a rare review from a VERY happy, satisfied customer. (Thanks, Apiker!) P.S. The key for success is to have things out and ready to go before you start the process. Do not skip steps. The dust removal sticker may seem like overkill, but it is not. Be ready to put the protector on top of your phone the SECOND you have it cleaned before any speck of dust can settle on it. Remember: DUST = BUBBLES.