M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)

I used this adapter for my macbook air 13 (early 2015 A1466) I used following ssd module lexar Nm610 nvme The only trouble I had was with opening of back panel and ssd module so make sure you get a pentalob screw driver. the one sent with the kit does not work. Before doing anything : 1. Take backup if your important data 2. Make a mac os bootable. When above is done : 1. just open back panel 2. Remove power adapter and battery cable. 3. remove old ssd. 4. Install converter and new ssd module 5. attach batter cable 6. put back the back panel 7. insert bootable mac os pendrive 8. boot it and go to disk utility 9 select your newly install ssd and erase it. 10. go back and select reinstall mac os Hope this helps.

Its a Good product - helps to solve the issue for upgrading my Macbook Air

Giving review after one month of use. My Macbook air 2017 working smoothly I have installed 500GB Samsung Evo 980. Facing 2-3 times restart issues. Recommended to upgrade your MAC. Easy to install.

Bad quality product. sometimes not working on SSD

I was looking to upgrade my MacBook Air stock 128 gb with a higher capacity ssd. Google search took me to this item listed in amazon. buying through aliexpress is definitely cheaper but takes more time and returns not easy so decided to buy this adapter on amazon. delivery was quick by the seller and the adapter arrived in 2 days. Tools required: 1) pentalobe 1.2 and T5 screwdriver. both are available on amazon. 2) M.2 nvme ssd 3) pen drive . 4. apple to m.2 nvme adapter. Steps: 1. create a bootable usb using macOS Catalina. 2. open back cover of MacBook using the pentalobe screwdriver. 3. disconnect the battery . 4. unscrew the stock ssd using T5 screwdriver. 5. pull out the ssd from its slot. 6. insert the m.2 adapter into the ssd slot.make sure it goes all the way in . 7. insert the new m.2 ssd into the adapter. 8. put back the ssd screw so that both the adapter and the ssd are firmly secured in position.9. reconnect the battery. 10. put back the back cover plate and screw tight the pentalobe screws. 11. switch on the Mac and boot from the usb drive with macOS Catalina. 12. format the new ssd using disk utility and install new os as clean install or from time machine backup. Important Points to keep in mind: not all drives are compatible with the adapter. Initially I used crucial MX 500 ssd but the system didn't recognise it. Then I tried with WD black 750 SN750. initially the system recognised it but I was unable to format it . Finally, I installed Samsung 970 evo 500gb and the system recognised it instantly and everything went smooth. I would recommend to use ONLY Samsung 970 evo as it worked for me. I have also installed windows 10 using bootcamp and so far no issues.

Bought it at 395/- and used with WD SN570 ssd on Mac Air 2017. I got 1200-1300 Mbps speed on both Mac and Windows (Bootcamp) As max limit for Mac hardware is around 1500-1600Mbps, I'm pretty satisfied with these speeds so far. I hope I dont face any issue of restart as stated by others. It's been 12 hours or so and it hasnt restarted even once thankfully. Definitely worth a try. BTW they sent a Good Quality screwdriver too.

⭐️⭐️⭐️ For not fitting properly else functions normal no hibernation or sleep wakeup issue till now I've been using for more than a week quality wise it's good but fitting is little different, attach a picture else go for it... without any thoughts like it if you find this helpful

The product is a perfect fit adapter for the NVME 2.0 M1 SSD and works like a charm. Although it's a bit pricey but no other adapter on Amazon seems to work if you're thinking about replacing your SSD.