SamaN Interior One Step Wood Seal, Stain and Varnish – Oil Based Odorless Dye - Protection for Furniture and Fine Wood (Aged Oak SAM-307, 8 oz)

I love this stain! goes on easy and dries quick, leaves a nice soft warm glow. Wasn't sure if I could use it on my hard wood floors but I gave it a try. They are beautiful! and the finish is holding up great. I have had both plumbers and electricians walking on them with ho problem. I have moved furniture around without scuffing my floors. I sandaled and stained my baseboards and doors and they came out beautiful. I loved that I didn't have to buy a stain and sealer separately. One coat covered everything. The only problem was if you get a drip brush it in quickly because it dries fast!, All you have to do is be careful and neat about applying the stain

Easy to work with and color is spot on and sooo gorgeous. I did 2 coats on this small antique dresser that I dry brushed off and I’m amazed at the results. Very happy!

On very hard maple sapwood, I have had much better results applying this product with a lint-free rag (along the grain, working fast) than a with a brush, counter to the manufacturer’s instructions. I have had no blotching, which is amazing with this particular timber. I also find that I can do additional coats after only five-to-ten minutes this way, also counter to the manufacturer’s instructions. I am doing a dark color; four coats gets me there.

Worked fairly well. Covered the wood without streaks. Nice even color. Only issues is with the sealing component. Its seem like it didn't sealed well ie. surface should have a clear sheen to it. So I slapped on a coat of clear. I was hoping I wouldn't have to.

Used on refurbishing kitchen drawers in rental. Easy coating. Brightened up drawers.

I used this to stain some 2x12 inch maple boards being used as shelf risers inside of a cabinet. Honestly, I just bought this product because it was the cheapest all-in-one stain I could find. I was pleased with the result. The color was exactly as pictured in the Amazon listing, a dark warm walnut. I put on 4 coats and waited 2 hours in between each. It is a milky color when it’s wet but dries clear. You definitely need multiple coats to get a rich color. This product worked well for my small project. The color ended up matching the stain inside my cabinet perfectly.

I love this product! Struggles with what to do with sun damaged cedar window sills. Followed instructions and some youtube videos. Am very happy with product!

I love this stain so much. I've purchased like, 4 bottles of it. I am not into the whole white kitchen aesthetic that has been so popular in recent years and when we moved to the house I am in now, I decided to just stain our cabinets to give them a makeover. This stain has held up over time. We stained the cabinets 3 years ago and they still look so shiny and have this beautiful golden oak color. I think the cabinets have a classic, timeless look now. We went on to stain other things in the house with this color. I even used it to stain a plant stand because it just looks so good! I highly recommend this product. It is worth paying a few extra dollars for. I've used the stains you find at other stores and nothing looks as good as this one.

Used this as a complete beginner to woodworking. Used on IKEA pine. Sanded the wood down and applied with a brush. Two coats worked best. Easy to use, easy to wash off. Dries nicely. Loved the sequoia colour

Perfect colour for my sewing desk which was previously varnished. I roughed it up a little then applied the stain. Coverage is amazing. One coat does it but wanted a bit darker so I chose to do two coats. Dries quickly. I did our oak kitchen table & chairs a couple years ago with SamaN. Turned out beautifully. This is the best product for your projects. Soap & water clean up. Highly recommend.

It is overall a satisfing experience and product. Easy to apply, low odors. However, because it is a stain with vanish, the first coat did the stain on the wood and it cannot be change later. For the first coat, any uneven painting, or more paint from one area than the others will cause the wood color look uneven, and there is no way to fix it. Because it is stain and vanish all-in-one formula, stain on second coat is blocked by the first coat, which cannot reach into the wood. I was making this mistake, then try to correct the color my applying multiple coats, and that does not help. What makes it worst is after 3+ coats, perhaps its too much, somehow makes the surface of the paint feel sticky, no matter how long the paint is dried.

I love this stain! I got it in Dark Walnut and it looks so killer on my desk. Definitely requires some skills to apply, and easy to leave streaks everywhere if you aren't fast and even with it. It being a 2-1 varnish and stain is super convenient and looks great.

I chose this SamaN interior one-step wood seal, stain and varnish for use on a herringbone on-edge plywood side table that I'm building. Being a living room piece that would be exposed to light moisture from beverages or plants, I wanted a stain that wasn't too strong in odour but would still offer protection from occasional light moisture. This stain has thus far worked really well. I'm very happy with the finish of the "antique" tone after having applied a single coat. I'm about to do a second coat after sanding. There was indeed some grain raising after the first coat but some light sanding should take care of that. I'm amazed at how low-odour this product actually is. If I didn't know better, I'd think this was water based as compared to my Varathane stains, this has very little to no odour. Great product thus far, I'll certainly try SamaN again for my next choice of interior stain.