Phanteks Neon Digital RGB LED Strip Combo Set - 2 x 400mm, Customisable Lighting

Easy to install, bright lights, one thing I don't like is the adhesive pads which should stick a bit stronger. It will come along easily but not really an issue, as you can just replace it with your own pads if you have your own one, other than that I really like the strips, works on aura too.

Super bright, really easy to set up and install, and supported by a lot of manufacturers, these are a great addition to any RGB build. I got these to do a "Tron" style lighting layout, and it looks ace.

Despite insisting I'd never go down the RGB route I wanted to add some lighting to my system after upgrading the case and most of the hardware so ended up with this. Some suggest the difficulty of installing this is complicated but for me it went pretty well. To start with, the sticky pads.....don't even let them or the surfaces you intend to stick them to touch your fingers. No matter how clean they are they will spoil its effectiveness straight away. Clean both surfaces, the back of the brackets and the surface you intend to mount, with Iso alcohol to remove invisible traces of dust and dirt and they will stick. Failing that a backup of No More Nails pads cut up will 100% work. 3M is almost enough but it's not the same as 3M which is used to mount dashcams to windscreens. (Update: I bought a second shorter one to add and the pads weren't as effective. Had to use No More Nails!). Other than that it's frustrating that the brackets don't fit within the profile of a fan, that is to say they stick out from the edge so if you have little or no clearance around fans then screwing them on isn't an option. Sticking them on worked however I don't know how long they will last in the summer when the glue will melt I suspect. The strip was easy enough to manoeuvre and took an hour to fit. That was including time it took to swap over a SATA connector though and moderate cable tidying so was no big deal. Installed the colours are more vibrant than I could have ever expected. It looks very similar to neon. Almost too bright at times and with some colours they need to be adjusted to be darker to change alter that characteristic. Animation of moving patterns is fantastic but I got this mainly just to light things up inside with the odd session of music with included light show! I didn't have the issue some mention of the light being dim when used in a chain. Mine is plugged into a SATA powered hub though which might be the difference. Overall worth the money for the difference it's made, close to 5 stars but sadly falls short.

Really nice diffused LEDs. A huge farce to fit with my case + mobo combination but I don't blame the lights for that. Just adds that little bit of flare ya know?

Installed perfectly into some grooves that happened to be in my computer case and they look great. Very pleased with them.

One of the worst things I have ever bought. No adhesion (and made from rubber). Bad design of brackets for installation. Not very bright in comparison to the competition. Straight in the bin.

I've had these strips for a couple months now. Pros: The good part about them is how they look. They look fantastic with no hotspots and are incredibly bright. They are individually addressable and, depending on your motherboard RGB software, have a lot of nice effects. They are also good value for money. Cons: Now for the reason why I wouldn't really recommend these: They're difficult and annoying to install. Seriously. I spent 2 hours doing this. The little sticky pads they give you (Of which were all stuck together in the bag, and which you have to INDIVIDUALLY APPLY) hardly ever actually stick properly to the interior of my NZXT h500 case. I had to get around this problem by pushing the strip into the gap between the glass of my case and the fan. Then there's the wiring. The only way I could get these to work was if I connected one strip directly to the other. I tried using the extension cable they give but it *didn't work.* As such, I'm left with awfully looking curved strips and a hanging wire. Also, the wiring in general for this thing is a mess in my opinion. In conclusion, they do actually look great, but the installation of them means that I can't currently recommend them to anyone. (Has this review helped you? If so, please consider clicking the 'helpful' button :) )

Despite the circumstances of my case’s smoked glass panel and there being just enough room to fit it worked out great as intended

Super leds de bonne qualité L'avantage est que les leds créé un effet d'éclairage continu et donc rend les couleurs beaucoup plus belles, il faut savoir que lon peut donner n'importe quel forme et angle aux leds et c'est vraiment sympa

Heel makkelijk te installeren. Gewoon het snoer koppelen aan de lichtstrip en deze aansluiten op je argb header op het moederbord. Ik heb het verlengsnoer gebruik om de strip boven te plaatsen. Deze is lang genoeg. De case die ik gebruik is de Corsair 5000D. Verder zijn de effecten in te stellen met de rgb software van je moederbord, in mijn geval aurasync. Maar openrgb en signalrgb werken ook. Product is een aanrader!

I don't know why I bought this... but I did, and I'm glad I did. Useless silly lights to go inside your expensive toy. Does what it says on the packet, looks like it does in the pictures. My girlfriend saw my previously non-epilepsy inducing computer and thinks I'm a cool hacker genius now. If you're looking at it, you already know you want it. Just treat yourself, you giant baby.

Pros: ultra bright and colorful. Great silicon diffusions which make the strip look way better than ordinary rgb strips. Works great with aura sync. Great addin to the build. Cons: still has a chance to break when you try to bend it (not even over 90 degree). I bought 2 at first. One of them not working properly after I thought I finished the installation. Had to order another and reinstall. I didn’t request a return since I tested the strip before installation and it worked well. It didn’t work after the installation so I’m pretty sure i broke it.

Dopo una attenta ricerca su strisce led ARGB mi sono imbattuto in queste e le ho acquistate, hanno decisamente rispettato le mie aspettative. Ho acquistato il kit da 2 strisce lunghe 40 cm l'una, sul sito di Phanteks potete trovare più informazioni riguardo le strisce. I supporti fanno il loro lavoro anche se a volte si scollano ma una volta posizionati correttamente restano lì, le strisce sono veramente molto luminose (e anche nel mio case che è un nzxt h7 che ha il vetro particolarmente scuro si vedono molto) e compatibili al 100% con il software aura sync di asus, non ho avuto alcun problema a collegarle e sono state rilevate immediatamente dal programma di gestione dei led, inoltre tutti gli effetti di luce sono molto fluidi e si può decidere se collegare le strisce consecutivamente (come ho fatto io) oppure una indipendente dall'altra. Unico difetto il prezzo, ma se utilizzate bene creano degli effetti veramente belli, non sono riuscito a trovarne di simili online. OTTIMO PRODOTTO!!! ➡️ Se ti fosse stata utile la recensione lascia pure un feedback che mi sarà utile per inserirne altre o chiedimi info se potessi aiutarti nell’acquisto lo faccio volentieri 🤗