Bentley Mounts Matney Universal Tablet Wall Mount Holder - Adjustable Swivel Arm 360° Rotating Hands-Free Flexible Viewing - Fits 2.25" to 11" Tablet/Phone in Home, Kitchen Office, Bedroom

I'm glad I found this great little mount. It is definitely solidly constructed. Installation was easy. Please note that you absolutely will need to install this in a stud (the provided anchors are for installation in brick, I think). The hinges are a bit stiff at first but all you need to do is pop the caps off the hinges on the top and bottom, put an allen wrench in one end and a ratchet in the other end, and loosen it up a little bit, then replace the caps. You only need to do this to two hinges and it takes maybe 5 minutes to do. Very easy. I like that this mount can be used for multiple devices. It is a big upgrade over the previous mount we used in this space. Definitely worth the money.

Bought this wall mount to allow me to watch my ipad while working out on an elliptical. Set up was easy - I was able to mount it with screws in a stud which I recommend - and fastening the ipad to the mount was simple and firm. Although others have voiced concern about how their device is fastened and I understand why that was said, I found it relatively easy to do and I have no concerns about the security of my device/ipad. Other reviewers have noted the stiffness of the hinges and they are that, but I found that stiffness comforting in that when you move your device you know it will stay in exactly the spot you placed it. If you have mounted in a stud, moving the mount from position to position is not a problem. In fact, the movement only reinforces how solid and secure the mount is. I would be concerned if the hinge movement was too loose, but not if it is stiff like this is.

This wall mount holds my Samsung Galaxy Tab A 10.1 inch (without a case) moderately securely, the tablet gripper arms are different on each side, one only tightens in three fixed places along it's adjustment axis and the other can tighten along its entire axis. The grippers can also be rotated on the X and Y plane relative to the face of the tablet. The mount is very secure if actually mounted to a stud or approved anchor. My only real suggestion for improvement would be a way for the mounting disc to have a rotating plate relative to the wall plane. I use this mount to place my tablet in optimal viewing angle when I'm lying on my side in bed, for that it serves its purpose excellently

I'm not a tablet user, but I have a flat "leaf" antenna (10-1/8" x 10-7/8" x .75") that I need at a specific angle in order to pick up the optimal collection of Over-The-Air stations. This is great for the antenna except that the antenna is a wee bit too thick for the clips (can thicker clips be had, it looks like it's trivial to replace?) but I can improvise. Mounting was easy. This is mounted to the rear of a bookcase cubby (1/4" plywood) by two screws. Although plastic drywall mollies are included, for the two mounting screws, I used metal butterfly drywall anchors to attach to the thin plywood and it is sturdy as it could be going into a stud. Mounted, there is great flexibility in movement horizontally and with vertical angle. Rotation is firm, not as sticy as the main hinges, about the same level of "stickiness" as the vertical hinge. Easy to move but a firm grip. The antenna is a bit too thick for the mount (my issue, although with a different clamp there is a great opportunity for added functionality) but the clips are flexibly arrange and easy to move with screw clamps once it's positioned where you want them. It is true that the hinges are tight, but for my application especially, this is a good thing as I can aim the antenna and it will not move even if lightly jostled in the back of the bookcase cubby.

This thing is THE BOMB. I installed it in under 5 minutes over my bed for hands-free reading. No more balancing my IPad on pillows or on my boyfriend...he moves around too much :) And when I fall asleep, it's out of the way and I'm not sleeping on it when I wake up in the morning! For those of you who mentioned how "tight" the movements are, take the caps off at the swivel points and you can adjust it. It tilts up and down, swivels left to right at three different points on each side, and it spins 360 degrees. You can pretty much position your tablet any way you want it. It's super sturdy and well made. I use the Defender series screen protector on my IPad (it's big and bulky but does the job it was meant to do) ... but you only have to remove the rubber part and it fits perfectly...glad I don't have to remove the plastic part. I have nothing bad to say about this except I wish I had two. The price is ridiculously low for something so great. More than satisfied.

The mount is easy to install and works well. I would have rated it 5 stars if it were not for two things: 1. Most importantly, it is the wrong color, actually 2 wrong colors! I expected it to be all black, as seen in the photos, but the wall mount and arm are silver, and worse, the part that clamps around the tablet, is white, so you see the white prongs on the sides of your tablet. If you had a white iPad, that might be okay, but my iPad is black... I would have returned/replaced it, except that after looking again online, it is unclear how to order a specific color - it seems it is the luck of the draw as to what color(s) you get. And, because I was mounting this inside a enclosed wiring closet that almost no one ever sees, it wasn't that important. Were it visible to guests I would have returned it for sure. 2. Less important, but less than ideal, the instructions weren't very good. It is actually very easy to install but at first glance, using the instructions, it isn't clear how to orient the parts. All of this is just a packaging problem, and that's a shame, because it's a good product except for them not giving you a way to select the correct color, and it would be very easy to improve the instructions.

Works exactly how I imagined, had it a few months now. I tend to watch shows before bed, so I mounted it bead my bedside. I did add a few pieces of sticky felt to the part the hits the wall so it won’t scratch the wall. Cuz It folds right to the wall. It’s sturdy and strong, the only thing I’d change is the part that holds the iPad is plastic and feels kinda cheap I wish it was metal but the arm and the rest is a nice strong metal. No issues so far, and It is very sturdy aside from the plastic part so no complaints!

Install was very easy and very sturdy. Now we have our family calendar, recipes and music all in one place and easily accessible in the kitchen. Holds my Samsung Galaxy Tab Pro 10.1 very well. The frame is all metal and very strong and only the part that holds the tablet is plastic but still very well made. 02/14/16 Update - The mount is still working great. I love it when I am cooking dinner so I can listen to music and reference my recipe. When not in use for cooking it swings right around and works great to keep track of my kids activities and other upcoming events.