• Auto and manual-ranging digital multimeter measures voltage, current, frequency, resistance, and capacitance, and performs diode and continuity tests.
• True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform.
• AC + DC coupling measurement provides the effective heating value of the AC and DC component of the waveform.
• Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit's diodes.
• Meets IEC safety standard 61010-1 and is certified for Category II installations up to 1000V, Category III installations up to 600V, Class II, Degree 2 for indoor use.

The B&K Precision 2712 digital multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter for measuring current, voltage, frequency, resistance, and capacitance, and performs diode and continuity tests in electrical applications. The AC + DC coupling measurement provides the effective heating value of the AC and DC component of the waveform. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit's diodes. The LCD is backlit for readability in low light and shows readings in digits and on a 34-segment bar graph. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 40,000-count resolution, meaning it can display up to 39,999 units (4-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply), and Degree 2 for indoor use. The meter includes a set of detachable test leads, a spare fuse, a 9V battery, a magnetic hanger, and instructions. Specifications -------------- Maximum alternating current (AC) input 10 amp Maximum direct current (DC) input 10 amp Maximum AC + DC volts (TRMS) 750V Maximum AC voltage input (TRMS) 750V Maximum DC voltage input 1000V Maximum resistance detected 40 megaohms Maximum capacitance 40 microfarads Maximum frequency range 500kHz Power supply 9V battery (one, installed) Safety ratings European Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1; European Union EMC (EN) EN61326 Weight Approximately 10oz./285g (including battery and hanger) Dimensions 165 x 78 x 42.5mm/6.5 x 3.1 x 1.7 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives. What's in the Box? ------------------ * B&K Precision 2712 digital multimeter * Set of test leads * Spare fuse * 9V battery (installed) * Magnetic hanger * Instructions