--- product_id: 7948740 title: "Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set" brand: "cal-van tools" price: "€ 447.32" currency: EUR in_stock: true reviews_count: 8 url: https://www.desertcart.es/products/7948740-cal-van-tools-95400-in-line-dowel-pin-puller-master store_origin: ES region: Spain --- # Made in Taiwan Brushed Finish 1 Piece Set Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set **Brand:** cal-van tools **Price:** € 447.32 **Availability:** ✅ In Stock ## Summary > 🔩 Pull with Precision, Extract with Ease! ## Quick Answers - **What is this?** Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set by cal-van tools - **How much does it cost?** € 447.32 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.es](https://www.desertcart.es/products/7948740-cal-van-tools-95400-in-line-dowel-pin-puller-master) ## Best For - cal-van tools enthusiasts ## Why This Product - Trusted cal-van tools brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Key Features - • **Compact Design:** Lightweight at just 4.6 lbs for easy handling. - • **Complete Master Set:** Includes both SAE and metric collets for all your needs. - • **Effortless Extraction:** Say goodbye to cumbersome slide hammers! - • **Precision Engineering:** Designed for efficiency and safety in dowel extraction. - • **Versatile Compatibility:** Works with both air and traditional ratchets. ## Overview The Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set is a professional-grade tool designed for efficient dowel extraction. This master set includes both SAE and metric collets, allowing for versatile use with air ratchets or traditional ratchets. Its brushed finish and compact design make it a reliable addition to any toolkit, ensuring safety and ease of use while eliminating the need for cumbersome slide hammers. ## Description Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set ## Features - Fits the appropriate sized collet over the dowel; tighten the sleeve; use outer sleeve and nut to extract the dowel - Can be used with air ratchet or traditional ratchet - Elimination of the slide hammer saves cost as well as effort and potential hand injury - Master set includes both SAE and metric collets ## Technical Specifications | Specification | Value | |---------------|-------| | Finish Type | Brushed | | Number of Pieces | 1 | | Manufacturer | Cal-Van Tools | | UPC | 047084954003 | | Global Trade Identification Number | 00047084954003 | | Model | 95400 | | Item Weight | 4.6 pounds | | Product Dimensions | 1 x 1 x 1 inches | | Country of Origin | Taiwan | | Item model number | 95400 | | Manufacturer Part Number | 95400 | ## Product Details - **Material:** Blend - **Size:** One Size - **Pin type:** Dowel - **Brand:** Cal-Van Tools - **Color:** Multi ## Images ![Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set - Image 1](https://m.media-amazon.com/images/I/81u3P3lr9FL.jpg) ## Questions & Answers **Q: What sizedccollets does this include?** A: 3/16” thru 1/2” 4MM thru 12MM **Q: What sized dowels will it pull?** A: Don't know the exact sizes, but It is capable of pulling every dowel in Toyota, Chevy (big and small block), and Jeep engines that I have tried. Doug **Q: What is the od of the total tool? the barrel the collet fits in. i have a dowl in a recessed hole to pull.** A: 1.320 OR APPROX 1 & 3/16" **Q: Will this pull 6mm dowel pins ? Thanks** A: Yes, it includes a 6mm extractor die and it has worked awesome for me so far. Over 100 pins pulled to date. ## Customer Reviews ### ⭐⭐⭐⭐⭐ Works amazingly well! *by R***A on January 24, 2021* I purchased this tool to remove the dowel pins on the engine block of my Toyota 22RE motor. I had previously tried to remove them using locking pliers, but aborted mission before I chewed up the pins too badly. I checked out YouTube and found a video about this tool, so decided to take a chance with it.WOW...I'm glad I did. Initially, when the tool first arrived, I was a little disappointed in it. Not a super huge fan of their zinc plated parts, although the collets themselves are fairly nicely made. The tool doesn't have a China or India feel to it or anything, but I just would have preferred the main threaded center rod to be hardened steel (or at least maybe something other than zinc plated). Nevertheless, I just used the tool and I have to say wow, wow, wow.. it worked amazingly well.A few tips:1. throw away their washers. They just cause problems and you don't need them. Instead, make sure you use plenty of high quality grease on the threads and also the surfaces where there is downward pressure.2. Soak the dowel to be removed in WD40 for a few hours. Then rough up the sides with some 320 grit sandpaper. Clean everything off with B12 chemtool (or any carb cleaner) and some compressed air. Make sure the inside of the removal collet is also clean and dry.3. No need to hammer the collet down or the sleeve over the collet down; the threaded rod will reduce the collet just fine and apply more than enough pressure on the sides of the dowel pin. Just make sure to use some grease in the taper fitting where the collet goes up into the sleeve part - also on the threads which thread into the back of the collet (and the surface where the center nut touches the collet sleeve).4. I used two hand wrenches, even though I have impact tools. It's better to feel how much torque you are applying. When setting the main part on the collet, I used two adjustable wrenches is all. I applied a fair amount of torque, but not enough to risk stripping the threads.5. Slide the outer sleeve down and over the threaded post and apply liberal amounts of grease to the nut and top of the outside sleeve where the nut sits - again the washers supplied in the kit are way too thick, so it's easier just to use some grease. I think if I were going to use this tool all the time, I would maybe shorten it about .125" and buy two washers and a radial needle bearing to use. For just occasional use, however, grease between the top nut and outside sleeve should be plenty good.6. Tighten down the top nut and away you go... if you are using handle tools, you can feel the dowel start to loosen and then it comes right out.Once the dowel pin is out, just unscrew the assembly a bit and use the inside rod to help press out the collet. Once the collet is out of the sleeve, it should open and allow the dowel pin out without too much effort. If the dowel pin is stuck, then you can always unscrew the extraction rod and use a brass punch to drift it through the threaded hole on the back of the collet.All in all, a very clever design. Definitely a tool you want to have around if you work on motors or need to remove dowel pins from flywheels, etc. ### ⭐⭐⭐⭐⭐ Works great! *by J***4 on April 3, 2025* Now that I got a new one, once again it wasn’t wrapped in plastic but this time came in a delivery bag and all the pieces were in the kit! Just used it to take the solid 8mm dowel out of this Yanmar crankshaft! Worked perfectly! A little pricey for what it is, but worth it if you need to get a dowel out. ### ⭐⭐⭐⭐⭐ Spendy but works well. *by P***. on December 8, 2023* Successfully removed a couple of dowel pins (with more to do) from a vintage engine. There's no way I could have done it without a proper tool like this without things getting ugly. This style is a little more involved to use but should be more versatile than a slide hammer type.A couple of tips to counter negative reviews:1) Lube all threads before use. This will ease use and prevent damage to the tool2) Scuff the pin to be pulled 150 or 220 grit paper. Usually they're quite smooth and polished. This will give the collet better grip.3) Don't overtighten the tool. This is subjective and will require some trial. There's no use in going gorilla on it and damaging the tool.4) An old machinist trick if scuffing the pin is not enough: Apply a dab of valve grinding compound to the pin before installing the tool. The grit in the compound will give the tool extra bite and won't hurt anything. Try it! ## Frequently Bought Together - Cal-Van Tools 95400 In-Line Dowel Pin Puller Master Set - Cal-Van Tools 95300 Metric Dowell Pin Puller --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.es/products/7948740-cal-van-tools-95400-in-line-dowel-pin-puller-master](https://www.desertcart.es/products/7948740-cal-van-tools-95400-in-line-dowel-pin-puller-master) --- *Product available on Desertcart Spain* *Store origin: ES* *Last updated: 2026-04-25*