---
product_id: 69073379
title: "Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7\" Size"
brand: "visit the eclipse store"
price: "€ 313.89"
currency: EUR
in_stock: true
reviews_count: 9
url: https://www.desertcart.es/products/69073379-eclipse-quick-release-woodworking-vise-gray-cast-iron-7-size
store_origin: ES
region: Spain
---

# Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size

**Brand:** visit the eclipse store
**Price:** € 313.89
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size by visit the eclipse store
- **How much does it cost?** € 313.89 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.es](https://www.desertcart.es/products/69073379-eclipse-quick-release-woodworking-vise-gray-cast-iron-7-size)

## Best For

- visit the eclipse store enthusiasts

## Why This Product

- Trusted visit the eclipse store brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Size:7 inches




























The Eclipse 7&quot; Quick Release Vise features a front mounted lever which disengages the vise screw to permit rapid opening and closing of the vise, meaning that you can quickly adjust the opening of the vise to either release or clamp a piece you&#x2019;re working on. It is fitted with an adjustable front stop (dog) that gives additional clamping facility when used with a bench stop, to provide a normal vise and a tail vise in one tool. To increase safety, the fused tommy bar will bend before the vise can become over-stressed. This vise features heavy cast iron and steel construction; a 7.87&quot; maximum opening; 3/4&quot; diameter guide rods and main screw; and 7&quot; wide x 3&quot; deep jaw faces predrilled for mounting wood jaw cushions, plus 2 predrilled holes and 2 cast tabs for mounting screws (screws not included). This vise is well constructed and will provide years of trouble-free service.

## Features

- About this item
- Quick release trigger allows you to quickly adjust the opening to either release or clamp a piece you’re working on
- Fitted with an adjustable front stop (dog) to provide a normal vise and a tail vise in one tool
- Vise comes with two predrilled holes for quick sturdy mounting to your workbench
- To increase safety, the fused tommy bar will bend before the vise can become over-stressed
- 7" jaw width, 3" throat depth; 20.7 lb. net weight; Voted #1 Woodworking Vise as seen on Wiki Video
- Eclipse professional tools have been selling since 1909

## Images

![Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size - Image 1](https://images-na.ssl-images-amazon.com/images/I/71jy5QEePCL.jpg)
![Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size - Image 2](https://images-na.ssl-images-amazon.com/images/I/61cagki%2BLbL.jpg)
![Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size - Image 3](https://images-na.ssl-images-amazon.com/images/I/91jeu5pIqvL.jpg)
![Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size - Image 4](https://images-na.ssl-images-amazon.com/images/I/91iZF%2BAv9EL.jpg)
![Eclipse Quick Release Woodworking Vise, Gray Cast Iron, 7" Size - Image 5](https://images-na.ssl-images-amazon.com/images/I/813mSGuzKIL.jpg)

## Available Options

This product comes in different **Size** options.

## Customer Reviews

### ⭐⭐⭐⭐ 







  
  
    High Qualilty Vise with Some MInor Issues
  

*by W***R on Reviewed in the United States on July 13, 2018*

I'm a professional woodworker and I bought this for my second workbench. I already have two 35 year old Wilton vises with quick release features that still work perfectly.  As I understand it this is a reproduction of the old Record No. 52 vise. It arrived undamaged from Amazon, the exterior box could  have used more padding but it's ok.  The action is smooth and is generally of high quality fabrication. The fast release mechanism works easily and the guide rods move without much friction and no binding. Everything is heavy duty and it should last a lifetime.I knocked it down one star for the following deficiencies (from a woodworker's point of view):1) The Lead Screw is pitted from chatter marks made during machining (see photo closeup). This is probably due to vibration during milling and also from using a dull cutting tool edge. Really dumb error on the machinist's part.2) The Lead Screw is not of Acme Thread quality (see photo of small section of an Acme Thread) like my old Wilton vises, which are very slow to wear out. However, I think this screw will also last a long time as the pitting does not affect the screw smoothness of movement.3) The movable end stop for your wood item being worked does not recess all the way into the moving face plate so that you cannot lay a  board down flush on the bench top and over the vise. So I had to hacksaw it off flush, about 1/4 inch taken off.4) The face plates are designed to protrude above the bench top about 2.0 inches so you have to put a thick spacer block between the underside of the bench and the top of the mount casting. My spacer was about 1.75 thick for the thickness of my top. I think this was designed by a metal worker not a woodworker where the piece being held never lays flush on the bench top.I looked at a lot of vises and most were wimpy or just cheap. I even rejected Wilton who have really downgraded their vises from when I bought several decades ago. The woodworking stores were the worst, selling cheap hobbyist stuff that will be very disappointing in a short year or two. They should be ashamed.Overall this is one of the best vises in this price range for the 10" size and will work fine in a heavy use woodshop bench environment. I have included several photos as it is hard to really see the vise in the sales ad photos.

### ⭐⭐⭐ 







  
  
    Over done "Toe-In" - Definitely not like the old Record Vice
  

*by B***R on Reviewed in the United States on November 28, 2017*

Update of the last update- I corrected the "toe-in" by planing the offending side of my liner.  Now that I have had time to use it, the vise works fine. I just hope it lasts as long as my Record 52-1/2.Update- After fixing the plate (see below) I installed the vise and the toe-in was almost 1/4".  Yes, it was over 3/16" in less than 4 inches. See the pictures below.Original post- Poor quality,  thin, cheap metal.  I missed the return window because I was making a workbench for this vice and got delayed on the bench. When I went to install it today, while wiping the shipping oil off, I noticed that the plate in the picture was bent.  There was no damage to the box, so this had to come from the factory this way.  I have an old Record vice also and the same plate on that one is twice a thick (no way is it going to bend).  Cheap stamped metal is not what should be on this vice!  The guide rails are loose, able to move around and as you can see in the pictures they could come completely out.Looking at the pictures- the plate should be straight across and even with the tri-square, but it is out of line further than the retaining washer.If they would have put a better piece of metal in, I would have given it a 4-star rating.  By trying to save at most five cents, they introduced a major structural flaw.  At $144.00 they could/should afford to add a slightly thicker plate.To the manufacturer: If you are going to copy a classic, the least you could do is copy the basic structural parts, so it functions correctly.  There is a reason they made things the way they did. They didn't cut corners on the certain things for a reason- neither should you.

### ⭐⭐⭐⭐⭐ 







  
  
    Wonderful addition to my shop.
  

*by S***N on Reviewed in the United States on January 30, 2016*

I love this vice. Perfect in every way. I have no idea how I survived without it. I researched vices for month! I was willing to spend $300. However looking at Paul Sellers and his vice this is a lot like the old Records. Well it didn't disappoint. You will need to download the instructions to install as there weren't any in the box, but is it pretty straight forward.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.es/products/69073379-eclipse-quick-release-woodworking-vise-gray-cast-iron-7-size](https://www.desertcart.es/products/69073379-eclipse-quick-release-woodworking-vise-gray-cast-iron-7-size)

---

*Product available on Desertcart Spain*
*Store origin: ES*
*Last updated: 2026-02-24*