---
product_id: 15482632
title: "Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2007 - 2018 Jeep Patriot | High Profile Bug Deflector - 1 pc., Dark Smoke | 24830"
brand: "auto ventshade"
price: "€ 318.11"
currency: EUR
in_stock: true
reviews_count: 13
url: https://www.desertcart.es/products/15482632-auto-ventshade-avs-bugflector-ii-hood-shield-protector-fits-2007
store_origin: ES
region: Spain
---

# Easy 3M tape installation Fits 2007-2018 Jeep Patriot High-profile bug deflection Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2007 - 2018 Jeep Patriot | High Profile Bug Deflector - 1 pc., Dark Smoke | 24830

**Brand:** auto ventshade
**Price:** € 318.11
**Availability:** ✅ In Stock

## Summary

> 🚙 Shield Your Ride, Elevate Your Drive!

## Quick Answers

- **What is this?** Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2007 - 2018 Jeep Patriot | High Profile Bug Deflector - 1 pc., Dark Smoke | 24830 by auto ventshade
- **How much does it cost?** € 318.11 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.es](https://www.desertcart.es/products/15482632-auto-ventshade-avs-bugflector-ii-hood-shield-protector-fits-2007)

## Best For

- auto ventshade enthusiasts

## Why This Product

- Trusted auto ventshade brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Tailored Fit:** Custom-designed for your Jeep Patriot's contours.
- • **Durable & Resilient:** Crafted from impact-resistant acrylic for long-lasting protection.
- • **Quick & Simple Setup:** Install in minutes with pre-applied 3M tape.
- • **Ultimate Bug Defense:** Engineered to block bugs at any speed!
- • **Proudly Made in the USA:** Quality construction with global materials.

## Overview

The Auto Ventshade Bugflector II is a high-profile hood shield designed specifically for 2007-2018 Jeep Patriots. It effectively blocks bugs and protects your vehicle from chips and dings, featuring a custom fit, durable construction, and easy installation with 3M tape.

## Description

Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2007 - 2018 Jeep Patriot | High Profile Bug Deflector - 1 pc., Dark Smoke | 24830

## Features

- FITMENT — 2007 - 2018 Jeep Patriot
- BLOCKS BUGS — Built to give the greatest amount of deflect to insects of any size at any speed with a high-profile design. Shields your hood, windshield, fenders, and lights from chips, dents, and dings.
- CUSTOMIZED FIT — Engineered to fit your vehicle's exact year, make, and model to complement the contours of your hood.
- DURABLE CONSTRUCTION — Made in the USA with global materials, including impact-resistant acrylic.
- EASY TO INSTALL — Installs easily and fast with pre-applied 3M automotive-grade tape or mechanical fasteners.

## Images

![Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2007 - 2018 Jeep Patriot | High Profile Bug Deflector - 1 pc., Dark Smoke | 24830 - Image 1](https://m.media-amazon.com/images/I/41F77Ks1vLL.jpg)
![Auto Ventshade [AVS] Bugflector II Hood Shield / Protector | Fits 2007 - 2018 Jeep Patriot | High Profile Bug Deflector - 1 pc., Dark Smoke | 24830 - Image 2](https://m.media-amazon.com/images/I/41F77Ks1vLL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Great fit and look on a 2016 Jeep Patriot
  

*by D***N on Reviewed in the United States on June 14, 2021*

I noticed after purchasing a used 2016 Jeep Patriot that 30 minutes of interstate driving resulted in a windshield full of bug splatter. The windows on these vehicles seem more vertical, like those on a school bus which seems to result in a larger amount of bug deposits at high speeds.Installation was not bad at all with the right tools. A fastener remover ( for example https://www.amazon.com/QMET-Plastic-Fastener-Remover-removal/dp/B0734VKNYK ) will make your life much easier when removing the weather-strip under the hood that must come off in order for this deflector to fit properly. Once you remove the weather-strip, hold the deflector up to pre-fit and mark where the screw tabs are going to be. You don't want to pull it all the way flush against the hood, rather it needs to attach along the edge where the trim was at which will offset it an inch or two. If you pull it flush against the hood, the deflector will lay down against the hood and not really deflect anything. Once marked, use the included alcohol pads to clean those areas of the hood. I then turned up corners on both sides of the two-sided tape for all four of the attachment points.  Starting at the middle I pulled off one backing and placed the deflector into position. I then worked my way to the outsides, pulling off backing and sticking the deflector in position. Press lightly at first until you are sure everything is centered. If you do this you can remove and restick fairly easily to reposition. Once in place firmly press all contact points to adhere the deflector.Once that was done I used a 7/64 drill bit to drill holes through the hood using the predrilled holes in each of the four tabs. Work slowly with as little pressure as needed to ensure once the bit goes through the underside of the hood you do not get into the top of the hood. This shouldn't be a problem as the hood is hollow. I used a screwdriver bit on my drill to then start the screw/washer and finished tightening by hand to ensure I did not over-torque the screw and crack the deflector.Replace the weather seal strip you took off first. It will wrap over the tabs. You will then need to use a razor knife to trim the weather strip around the tabs as in the 3rd and 4th pictures. The hood will not close or will be very difficult to close unless this last step is taken.

### ⭐⭐⭐⭐⭐ 5.0 out of 5 stars







  
  
    Looks great, but took a little extra effort
  

*by J***E on Reviewed in the United States on March 25, 2021*

I love the look this gives my '12 Jeep Patriot. Installing it took a little bit of extra doing to get the job done right. I had to remove a strip of foam from the underside of my hood first as this deflector was not going to bend enough & I didn't want to risk ripping the foam strip. I'm lucky I have the perfect tool for removing the plastic screws that held the strip in place.After I got that out of the way, it was simple enough to center and stick it in place with the built-in adhesive strips. The most difficult part was adding the "optional" screws for added security. They say they are self tapping, but that is a joke. After messing around with it for a good 10 minutes, I got out my drill bits and CAREFULLY went to work. I was lucky that my hood actually has built in space between the top and the bottom so my risk of drilling through the top was lower, but still left me worried. Nonetheless, I was finally able to screw it to the hood and put the foam strip back up.

### ⭐⭐⭐⭐ 4.0 out of 5 stars







  
  
    Was what I wanted
  

*by S***N on Reviewed in the United States on June 9, 2022*

How easy it was to put on

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.es/products/15482632-auto-ventshade-avs-bugflector-ii-hood-shield-protector-fits-2007](https://www.desertcart.es/products/15482632-auto-ventshade-avs-bugflector-ii-hood-shield-protector-fits-2007)

---

*Product available on Desertcart Spain*
*Store origin: ES*
*Last updated: 2026-01-22*