Fox 2.0 Performance Series Coil-Over Front Pair compatible with 07-18 Silverado 1500 2WD 4WD Stl

Installed these along with the rear fox 2.0 shocks on my 2016 Chevy Silverado 1500 LTZ. Brought the front up 2 inches and noticed a big difference in how the truck handled and rode. Definitely happy with the results and good price from amazon.

Absolutely love em

Could of gone up another inch but starts to put a lot of tension on other parts. I like it though. 2” clears the 285/70/17

So where do I start? Hmmmm..... 1.) One of the top coil over bolts spun the spline on the install. Apparently the torque required to tighten a lock nut with a ratchet wrench is just a little too for the bolt/spline to handle. 2.) "Adjustable Coilover" Yes. Maybe. Sort of. Not really. You can (I did) purchase the Fox 2.0 Spanner Wrench for the Fox 2.0 coil over. Makes sense right? I though so too. Don't bother ordering the Fox 2.0 Spanner Wrench for the Fox 2.0 Coilover. It doesn't work. If doesn't work because if you want to adjust the coil overs......which most people are going to want to do.....you have to physically take them back off the truck, put them in a press and adjust them that way. Then you can reinstall them and hope for the best that it's where you wanted it to be. The math works out that four turns of the jam nut gives you .500". If you try and adjust them on the truck by jacking the front end up to release the tension, loosening the 3/16" set screw and forcing the Fox 2.0 Spanner Wrench up in the area.....It will start to tighten and then jump the threads. Doing this will actually lower the truck not lift it and it is dangerous as F. PUT THIS NOTE IN THE INSTALLATION MANUAL. If you have the 2014-Up Silverado just spare yourself the frustration and buy a different brand of Coil over. These are CRAP design. Cheap. Not adjustable by any stretch of the normal imagination.

Perfect fit smooth ride