K66

This case is amazing. First of all, I just want to say thank you to the manufacturer for including a small organizer for all the screws. A screwdriver a nifty little magnet and all the accessories that you could possibly need for your build As far as the build goes, this case is very easy to build in for a small form factor. Plenty of room to maneuver around the aesthetics of the case are nice. I'm running a ryzen 5 7600 x3d and the thermal test on this case keeps it around 75° c with a thermal right 135 mm CPU fan. I also put three 92 mm fans at the bottom of the case and with my RX 7600 this machine can game very well and is very portable. I am very satisfied with the structure of the case with the cooling and all the accessories that come along with it. Definitely an a+. I will definitely buy from this manufacturer again

I'm usually not someone who writes reviews, but for this I feel like this warrants it. I ordered this PC case a few months ago but did not get to start the build just until recently. Unfortunately once I opened the case I noticed 1 rivet that wasn't set properly from the manufacturing process. Because a few months had already gone by, I was way past the return window with Amazon. Since I felt like this was a QC issue, I reached out to SGPC Design customer support by email. Sent them a picture of the issue and asked what they could do for me. They responded quick and acknowledged that it was a QC issue on their part, and without even asking, they shipped me a new case to replace my bad one RIGHT AWAY! It arrived in just a few days! After I finished my build, this was probably more my fault for maybe over torquing the mounting screws for the orange handle. The handle broke the first time me lifting it. I think I made my build a bit too heavy for it as well. I reached out to support again .... and again they responded to my email so quick and without asking they sent me a replacement as a "complimentary gift" So appreciative of this. I've got nothing but praises for their support team. A+ Now for the review for the actual product. I love this case. With the right parts it is a neat little case that you can throw into a backpack and take with you on travel. Assembly is pretty solid. Cable management is a bit lacking but I knew that ahead of time and lets be honest, the smaller the case is the more thats a given.

Surprisingly easy case to work with and has clear instructions. Product page could do a better job of explaining drive compatibility (there are 5 2.5" drive mounting points along the bottom of the case, but if your GPU is too long, it may prevent installing some or all of them there. There is a 6th 2.5" drive in front of the window on the bottom, but if your GPU is too tall, it will again prevent installing one there.) Theres a number of odd design shortcomings though that I have to take a star off for: 1) you can't center the handle due to the even number of holes both width-wise and length-wise, and installing the handle needs simple but specific tools (or just really thin needle nose pliers) which are not provided 2) the filters are attached with adhesive, and the adhesive is kinda weak. The bottom filter was not entirely attached out of box. This is sort of the worst of both worlds - it comes off easily, especially if you have to punch screw holes through it to mount things, and then wont go back on, especially after its been used and dust has gotten into the case an on the adhesive. It would have been better to make the filter have magnetic strips attached and have pre-placed cutouts in the filter for screw holes (ex, mounting drives or the handle. Overall a nice case to work with and I hope to see improvements in the next generation of products. This is definitely a niche I hope they expand and iterate on.

This case is really nice for its price and comes with everything you need along with easy to understand instructions. The white steel paint quality is really good and comes with extra screws for everything, even comes with white thumbscrew and silver thumbscrew options for the glass panel. The included 92mm fan is ARGB and also comes with a full sized phillips screwdriver. Everything is packaged well and was delivered fast without any issues. Was kind of hard to find many reviews of this case, but coming from using a SSUPD Meshlicious, Lian Li Dan A4-H2O and Louqe Ghost S1 MKIII, this was a pleasant surprise and a nice setup that keeps a reference layout with plenty of air cooling options. 10/10 would recommend this case to anyone looking for a similar setup!

The case is perfectly sized, very dense when loaded up and one of the only cases that gives you a decent sized GPU, cooler, and PSU. Keeps everything quite cool as well while being pretty quiet. I have a Thermalright Peerless Assassin 120 Mini cooling my R9 5900x, and it works perfectly! Love the aesthetic as well!

Very tight fit

Amazing case for a mini-ITX build with a GPU!

Best looking itx case of this size. There are a few quality things like metal being bent or screw holes right on the edge of metal, but still a great case.

For a case of this price point the metal is very flimsy and the design is very flawed,the two biggest flaws being, one the psu mounting is beyond terrible I had to resort to double sided tape, and two, instead of the psu plug being in the standard spot for cases of this size, it is instead put in an awkward position near the gpu.

Gutes und vor allem kleines Case. Bei mir ists n ryzen 9, rtx 5060 single geworden, mit etwas Geduldt bekommt man alles sehr gut unter, habe sogar einen lüfter und eine ssd mehr unter gekommen.

なんとなくひとめぼれで購入してしまいました。 フルハイトグラボが使えるケースでしたら、 最小クラスに入るのではないでしょうか？？ （当方はゲームとは現在全く縁が有りませんが。。。） ちっちゃくて見栄えも良くていい感じで購入して良かったです。 ただし以下の点には注意が必要です。 ・オレンジの取っ手を付ける場合には仕様が変わったのか トップのネット部分に自分で2つ穴をあけないと付きません。ネジ等の部品はついて来ます。 ・LEDランプ等が一切ないデザインです。 意図されて付けられてないのかどうかわかりませんが、 ランプ類が有りません。。。光るファンとかでない場合、 電源のON、OFFが判りづらいです。。。 そこで私はアマゾンさんで売っていたLED付のスイッチ(12mm)に交換してみました。 基板をカットしないと付かないため全くおススメできませんが、、、 ご参考になれば幸いです。（写真ご参照） ・CPUファンが大きい場合、背面の9cmファンはスペースの関係から、 薄型のモノでないと付かないかもしれませんです。（写真の通りです） いろいろ書いてしまいましたがちょっと手を入れれば、 パソコンはこれ一台で事足りそうなケースじゃないかなあと感じました。 今後の耐久性に期待しております。 ちなみに現在の構成です。 CPU：AMD Ryzen 5 5600GT クーラー：ID-COOLING IS-55 MB：Gigabyte A520I AC メモリ：Crucial DDR4 8GBｘ2 SSD：Crucial P310 1TB 電源：ウチにあった300WのSFX電源

This case demonstrates how a bad design ruin the user experience. It won’t allow you to take off the front and top panel, making the cable management process a nightmare…

電源ケーブルが断線していた。 新しく自作するために購入した(新しく電源ユニットも同時に購入)が通電されず、電源ユニットの不良を疑って手持ちの電源ユニットを使用しても改善無し。 電源ユニットに直に接続すると起動できたので、断線は間違いない。 とサポートに連絡すると、補修部品を発送してくれるとの事で、高評価。本体寸法もGood。